linux.git/drivers/scsi, branch v3.11-rc4

[SCSI] isci: fix breakage caused by >16byte CDB patch

2013-07-24T21:18:12+00:00

Oops, apparently no-one I cc'd at intel actually bothered to check this
patch for the isci driver:

commit e73823f7a2c921dcf068d34ea03bd682498d9e42
Author: James Bottomley 
Date:   Tue May 7 15:38:18 2013 -0700

    [SCSI] libsas: implement > 16 byte CDB support

sci_swab32_cpy needs multiples of four, so for commands that aren't that, it's
rounding the wrong way.  fix by doing (len+3)/4 instead of len/4.

Reported-by: Tony Luck 
Tested-by: Tony Luck 
Signed-off-by: James Bottomley

[SCSI] mvsas: Fix kernel panic on tile due to unaligned data access

2013-07-23T22:23:08+00:00

slot->response is a 64 bit quantity (and accessed as such), but its alignment
is only 32 bits.  This doesn't cause a problem on x86, but apparently causes a
kernel panic on Tile:

Stack dump complete Kernel panic - not syncing:
 Kernel unalign fault running the idle task!
 Starting stack dump of tid 0, pid 0 (swapper) on cpu 1 at cycle 341586172541
   frame 0: 0xfffffff700140ee0 dump_stack+0x0/0x20 (sp 0xfffffe43ffedf420)
   frame 1: 0xfffffff700283270 panic+0x150/0x3a0 (sp 0xfffffe43ffedf420)
   frame 2: 0xfffffff70012bff8 jit_bundle_gen+0xfd8/0x27e0 (sp 0xfffffe43ffedf4c8)
   frame 3: 0xfffffff7003b5b68 do_unaligned+0xc0/0x5a0 (sp 0xfffffe43ffedf710)
   frame 4: 0xfffffff70044ca78 handle_interrupt+0x270/0x278 (sp 0xfffffe43ffedf840)
   
   frame 5: 0xfffffff7002ac370 mvs_slot_complete+0x5f0/0x12a0 (sp 0xfffffe43ffedfa90)
   frame 6: 0xfffffff7002abec0 mvs_slot_complete+0x140/0x12a0 (sp 0xfffffe43ffedfa90)
   frame 7: 0xfffffff7005cc840 mvs_int_rx+0x140/0x2a0 (sp 0xfffffe43ffedfb00)
   frame 8: 0xfffffff7005bbaf0 mvs_94xx_isr+0xd8/0x2b8 (sp 0xfffffe43ffedfb68)
   frame 9: 0xfffffff700658ba0 mvs_tasklet+0x128/0x1f8 (sp 0xfffffe43ffedfba8)
   frame 10: 0xfffffff7003e8230 tasklet_action+0x178/0x2c8 (sp 0xfffffe43ffedfbe0)
   frame 11: 0xfffffff700103850 __do_softirq+0x210/0x398 (sp 0xfffffe43ffedfc40)
   frame 12: 0xfffffff700180308 do_softirq+0xc8/0x140 (sp 0xfffffe43ffedfcd8)
   frame 13: 0xfffffff7000bd7f0 irq_exit+0xb0/0x158 (sp 0xfffffe43ffedfcf0)
   frame 14: 0xfffffff70013fa58 tile_dev_intr+0x1d8/0x2f0 (sp 0xfffffe43ffedfd00)
   frame 15: 0xfffffff70044ca78 handle_interrupt+0x270/0x278 (sp 0xfffffe43ffedfd40)
   
   frame 16: 0xfffffff700143e68 _cpu_idle_nap+0x0/0x18 (sp 0xfffffe43ffedffb0)
   frame 17: 0xfffffff700482480 cpu_idle+0x310/0x428 (sp 0xfffffe43ffedffb0)

Since the check is just for non-zero, split it to be two 32 bit accesses
(preserving speed in the fast path) and do a get_unaligned() in the slow path.

This is a modification of a wholly get_unaligned patch submitted by Paul Guo

Reported-by: Paul Guo 
Signed-off-by: James Bottomley

[SCSI] sd: fix crash when UA received on DIF enabled device

2013-07-23T14:41:53+00:00

sd_prep_fn will allocate a larger CDB for the command via mempool_alloc
for devices using DIF type 2 protection.  This CDB was being freed
in sd_done, which results in a kernel crash if the command is retried
due to a UNIT ATTENTION.  This change moves the code to free the larger
CDB into sd_unprep_fn instead, which is invoked after the request is
complete.

It is no longer necessary to call scsi_print_command separately for
this case as the ->cmnd will no longer be NULL in the normal code path.

Also removed conditional test for DIF type 2 when freeing the larger
CDB because the protection_type could have been changed via sysfs while
the command was executing.

Signed-off-by: Ewan D. Milne 
Acked-by: Martin K. Petersen 
Cc: 
Signed-off-by: James Bottomley

[SCSI] qla2xxx: Properly set the tagging for commands.

2013-07-23T14:23:47+00:00

This fixes a regression where Xyratex controllers and disks were lost by the
driver:

https://bugzilla.kernel.org/show_bug.cgi?id=59601

Reported-by: Jack Hill 
Signed-off-by: Saurav Kashyap 
Signed-off-by: Giridhar Malavali 
Cc: 
Signed-off-by: James Bottomley

[SCSI] isci: Fix a race condition in the SSP task management path

2013-07-23T14:16:57+00:00

This commit fixes a race condition in the isci driver abort task and SSP
device task management path.  The race is caused when an I/O termination
in the SCU hardware is necessary because of an SSP target timeout condition,
and the check of the I/O end state races against the HW-termination-driven
end state.  The failure of the race meant that no TMF was sent to the device
to clean-up the pending I/O.

Signed-off-by: Jeff Skirvin 
Reviewed-by: Lukasz Dorau 
Cc: 
Signed-off-by: James Bottomley

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2013-07-14T00:41:21+00:00

Pull final round of SCSI updates from James Bottomley:
 "This is the remaining set of SCSI patches for the merge window.  It's
  mostly driver updates (scsi_debug, qla2xxx, storvsc, mp3sas).  There
  are also several bug fixes in fcoe, libfc, and megaraid_sas.  We also
  have a couple of core changes to try to make device destruction more
  deterministic"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  [SCSI] scsi constants: command, sense key + additional sense strings
  fcoe: Reduce number of sparse warnings
  fcoe: Stop fc_rport_priv structure leak
  libfcoe: Fix meaningless log statement
  libfc: Differentiate echange timer cancellation debug statements
  libfc: Remove extra space in fc_exch_timer_cancel definition
  fcoe: fix the link error status block sparse warnings
  fcoe: Fix smatch warning in fcoe_fdmi_info function
  libfc: Reject PLOGI from nodes with incompatible role
  [SCSI] enable destruction of blocked devices which fail LUN scanning
  [SCSI] Fix race between starved list and device removal
  [SCSI] megaraid_sas: fix a bug for 64 bit arches
  [SCSI] scsi_debug: reduce duplication between prot_verify_read and prot_verify_write
  [SCSI] scsi_debug: simplify offset calculation for dif_storep
  [SCSI] scsi_debug: invalidate protection info for unmapped region
  [SCSI] scsi_debug: fix NULL pointer dereference with parameters dif=0 dix=1
  [SCSI] scsi_debug: fix incorrectly nested kmap_atomic()
  [SCSI] scsi_debug: fix invalid address passed to kunmap_atomic()
  [SCSI] mpt3sas: Bump driver version to v02.100.00.00
  [SCSI] mpt3sas: when async scanning is enabled then while scanning, devices are removed but their transport layer entries are not removed
  ...

Merge tag 'fcoe' into for-linus

2013-07-13T04:22:56+00:00

A short series of fixes to libfc, libfcoe and fcoe.
Most patches fix formatting problems, one changes
the behavior of which discovered ports can/will be
logged into and another fixes a memory leak.

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2013-07-11T19:57:19+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "Lots of activity this round on performance improvements in target-core
  while benchmarking the prototype scsi-mq initiator code with
  vhost-scsi fabric ports, along with a number of iscsi/iser-target
  improvements and hardening fixes for exception path cases post v3.10
  merge.

  The highlights include:

   - Make persistent reservations APTPL buffer allocated on-demand, and
     drop per t10_reservation buffer.  (grover)
   - Make virtual LUN=0 a NULLIO device, and skip allocation of NULLIO
     device pages (grover)
   - Add transport_cmd_check_stop write_pending bit to avoid extra
     access of ->t_state_lock is WRITE I/O submission fast-path.  (nab)
   - Drop unnecessary CMD_T_DEV_ACTIVE check from
     transport_lun_remove_cmd to avoid extra access of ->t_state_lock in
     release fast-path.  (nab)
   - Avoid extra t_state_lock access in __target_execute_cmd fast-path
     (nab)
   - Drop unnecessary vhost-scsi wait_for_tasks=true usage +
     ->t_state_lock access in release fast-path.  (nab)
   - Convert vhost-scsi to use modern se_cmd->cmd_kref
     TARGET_SCF_ACK_KREF usage (nab)
   - Add tracepoints for SCSI commands being processed (roland)
   - Refactoring of iscsi-target handling of ISCSI_OP_NOOP +
     ISCSI_OP_TEXT to be transport independent (nab)
   - Add iscsi-target SendTargets=$IQN support for in-band discovery
     (nab)
   - Add iser-target support for in-band discovery (nab + Or)
   - Add iscsi-target demo-mode TPG authentication context support (nab)
   - Fix isert_put_reject payload buffer post (nab)
   - Fix iscsit_add_reject* usage for iser (nab)
   - Fix iscsit_sequence_cmd reject handling for iser (nab)
   - Fix ISCSI_OP_SCSI_TMFUNC handling for iser (nab)
   - Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED (nab)

  The last five iscsi/iser-target items are CC'ed to stable, as they do
  address issues present in v3.10 code.  They are certainly larger than
  I'd like for stable patch set, but are important to ensure proper
  REJECT exception handling in iser-target for 3.10.y"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
  iser-target: Ignore non TEXT + LOGOUT opcodes for discovery
  target: make queue_tm_rsp() return void
  target: remove unused codes from enum tcm_tmrsp_table
  iscsi-target: kstrtou* configfs attribute parameter cleanups
  iscsi-target: Fix tfc_tpg_auth_cit configfs length overflow
  iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow
  iser-target: Add support for ISCSI_OP_TEXT opcode + payload handling
  iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len]
  iser-target: Add vendor_err debug output
  target: Add (obsolete) checking for PMI/LBA fields in READ CAPACITY(10)
  target: Return correct sense data for IO past the end of a device
  target: Add tracepoints for SCSI commands being processed
  iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED
  iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iser
  iscsi-target: Fix iscsit_sequence_cmd reject handling for iser
  iscsi-target: Fix iscsit_add_reject* usage for iser
  iser-target: Fix isert_put_reject payload buffer post
  iscsi-target: missing kfree() on error path
  iscsi-target: Drop left-over iscsi_conn->bad_hdr
  target: Make core_scsi3_update_and_write_aptpl return sense_reason_t
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2013-07-10T01:24:39+00:00

Pull networking updates from David Miller:
"This is a re-do of the net-next pull request for the current merge
window. The only difference from the one I made the other day is that
this has Eliezer's interface renames and the timeout handling changes
made based upon your feedback, as well as a few bug fixes that have
trickeled in.

Highlights:

1) Low latency device polling, eliminating the cost of interrupt
handling and context switches. Allows direct polling of a network
device from socket operations, such as recvmsg() and poll().

Currently ixgbe, mlx4, and bnx2x support this feature.

Full high level description, performance numbers, and design in
commit 0a4db187a999 ("Merge branch 'll_poll'")

From Eliezer Tamir.

2) With the routing cache removed, ip_check_mc_rcu() gets exercised
more than ever before in the case where we have lots of multicast
addresses. Use a hash table instead of a simple linked list, from
Eric Dumazet.

3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

4) Support reporting the TUN device persist flag to userspace, from
Pavel Emelyanov.

5) Allow controlling network device VF link state using netlink, from
Rony Efraim.

6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
Daniel Borkmann and Eric Dumazet.

8) Allow controlling of TCP quickack behavior on a per-route basis,
from Cong Wang.

9) Several bug fixes and improvements to vxlan from Stephen
Hemminger, Pravin B Shelar, and Mike Rapoport. In particular,
support receiving on multiple UDP ports.

10) Major cleanups, particular in the area of debugging and cookie
lifetime handline, to the SCTP protocol code. From Daniel
Borkmann.

11) Allow packets to cross network namespaces when traversing tunnel
devices. From Nicolas Dichtel.

12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
manner akin to how we monitor real network traffic via ptype_all.
From Daniel Borkmann.

13) Several bug fixes and improvements for the new alx device driver,
from Johannes Berg.

14) Fix scalability issues in the netem packet scheduler's time queue,
by using an rbtree. From Eric Dumazet.

15) Several bug fixes in TCP loss recovery handling, from Yuchung
Cheng.

16) Add support for GSO segmentation of MPLS packets, from Simon
Horman.

17) Make network notifiers have a real data type for the opaque
pointer that's passed into them. Use this to properly handle
network device flag changes in arp_netdev_event(). From Jiri
Pirko and Timo Teräs.

18) Convert several drivers over to module_pci_driver(), from Peter
Huewe.

19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
O(1) calculation instead. From Eric Dumazet.

20) Support setting of explicit tunnel peer addresses in ipv6, just
like ipv4. From Nicolas Dichtel.

21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

22) Prevent a single high rate flow from overruning an individual cpu
during RX packet processing via selective flow shedding. From
Willem de Bruijn.

23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
Dumazet.

24) Don't just drop GSO packets which are above the TBF scheduler's
burst limit, chop them up so they are in-bounds instead. Also
from Eric Dumazet.

25) VLAN offloads are missed when configured on top of a bridge, fix
from Vlad Yasevich.

26) Support IPV6 in ping sockets. From Lorenzo Colitti.

27) Receive flow steering targets should be updated at poll() time
too, from David Majnemer.

28) Fix several corner case regressions in PMTU/redirect handling due
to the routing cache removal, from Timo Teräs.

29) We have to be mindful of ipv4 mapped ipv6 sockets in
upd_v6_push_pending_frames(). From Hannes Frederic Sowa.

30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
drivers/net: caif: fix wrong rtnl_is_locked() usage
drivers/net: enic: release rtnl_lock on error-path
vhost-net: fix use-after-free in vhost_net_flush
net: mv643xx_eth: do not use port number as platform device id
net: sctp: confirm route during forward progress
virtio_net: fix race in RX VQ processing
virtio: support unlocked queue poll
net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
Documentation: Fix references to defunct linux-net@vger.kernel.org
net/fs: change busy poll time accounting
net: rename low latency sockets functions to busy poll
bridge: fix some kernel warning in multicast timer
sfc: Fix memory leak when discarding scattered packets
sit: fix tunnel update via netlink
dt:net:stmmac: Add dt specific phy reset callback support.
dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
dt:net:stmmac: Allocate platform data only if its NULL.
net:stmmac: fix memleak in the open method
ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
net: ipv6: fix wrong ping_v6_sendmsg return value
...

[SCSI] scsi constants: command, sense key + additional sense strings

2013-07-09T21:52:29+00:00

It has been several years since the SCSI constants.c
file has been updated. The attached is against lk 3.10
and brings the command strings, sense keys and additional
sense code strings into sync with spc4r36g.pdf.

Certain SCSI command names that previously only took the
opcode (i.e. byte 0 of the cdb) into account, have been
split into several command names using the associated
service action field to differentiate. For example,
persistent reservations that previously had 2 commands
(i.e. "in" and "out") have been expanded to 12 commands
(e.g. "Persistent reserve in, read reservation").

Sync SCSI command names, sense key strings and additional
sense code strings with SPC-4 draft revision 36g

[jejb: whitespace fix]
Signed-off-by: Douglas Gilbert 
Signed-off-by: James Bottomley