linux.git/drivers/scsi, branch v2.6.24

[SCSI] initio: fix module hangs on loading

2008-01-23T23:07:33+00:00

I've verified (on my Initio 9100 with a DAT drive) that the
2.6.24-rc8-git6 initio module still hangs on loading.

These fixes (other than the printk) are needed to get the module to load
ok (and work correctly) with my adapter & tape drive.

a) printk cosmetic fix

b) cblk->sglen needs setting for later DMA I/O routines to use

c) host->bios_addr needs setting for debug output correctness

d) semaph & semaph_lock initialisation had got lost since 2.6.22

e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20
when shifted left)

Signed-off-by: James Bottomley

Fix file references in documentation and Kconfig

2008-01-22T18:43:36+00:00

Fix typo in arch/powerpc/boot/flatdevtree_env.h.
There is no Documentation/networking/ixgbe.txt.

README.cycladesZ is now in Documentation/.
wavelan.p.h is now in drivers/net/wireless/.
HFS.txt is now Documentation/filesystems/hfs.txt.
OSS-files are now in sound/oss/.

Signed-off-by: Johann Felix Soden 
Acked-by: Randy Dunlap 
Signed-off-by: Linus Torvalds

advansys: fix section mismatch warning

2008-01-14T16:52:23+00:00

Fix section mismatch warning:

WARNING: vmlinux.o(.exit.text+0x152a): Section mismatch: reference to .init.data:_asc_def_iop_base (between 'advansys_isa_remove' and 'advansys_exit')

Signed-off-by: Randy Dunlap 
Cc: Matthew Wilcox 
Cc: James Bottomley 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

scsi/qla2xxx/qla_os.c section fix

2008-01-14T16:52:22+00:00

WARNING: vmlinux.o(.text+0x2a4462): Section mismatch: reference to .exit.text:qla2x00_remove_one (between 'qla2xxx_pci_error_detected' and 'qla2x00_stop_timer')

qla2x00_remove_one() mustn't be __devexit since it's called from
qla2xxx_pci_error_detected().

Signed-off-by: Adrian Bunk 
Acked-by: Seokmann Ju 
Acked-by: Andrew Vasquez 
Cc: Randy Dunlap 
Cc: James Bottomley 
Acked-by: Sam Ravnborg 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[SCSI] qla1280: fix 32 bit segment code

2008-01-09T21:06:07+00:00

There's an error remaining in the 32 bit descriptor code after the
conversion to dma accessors:  req_cnt is left uninitialised.

qla1280_32bit_start_scsi gives the following warnings:

drivers/scsi/qla1280.c: In function 'qla1280_32bit_start_scsi':
drivers/scsi/qla1280.c:3044: warning: unused variable 'dma_handle'
drivers/scsi/qla1280.c: In function 'qla1280_queuecommand':
drivers/scsi/qla1280.c:3060: warning: 'req_cnt' is used uninitialized in this function
drivers/scsi/qla1280.c:3042: note: 'req_cnt' was declared here

Signed-off-by: FUJITA Tomonori 
Signed-off-by: James Bottomley

Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""

2008-01-06T18:17:12+00:00

This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.

It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.

The real problem seems to have been found by Peter Osterlund:

  "pktcdvd sets it [block device size] when opening the /dev/pktcdvd
   device, but when the drive is later opened as /dev/scd0, there is
   nothing that sets it back.  (Btw, 40944 is possible if the disk is a
   CDRW that was formatted with "cdrwtool -m 10236".)

   The problem is that pktcdvd opens the cd device in non-blocking mode
   when pktsetup is run, and doesn't close it again until pktsetup -d is
   run.  The effect is that if you meanwhile open the cd device,
   blkdev.c:do_open() doesn't call bd_set_size() because
   bdev->bd_openers is non-zero."

In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):

  " 1. Start with an empty drive.
    2. pktsetup 0 /dev/scd0
    3. Insert a CD containing an isofs filesystem.
    4. mount /dev/pktcdvd/0 /mnt/tmp
    5. umount /mnt/tmp
    6. Press the eject button.
    7. Insert a DVD containing a non-writable filesystem.
    8. mount /dev/scd0 /mnt/tmp
    9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
    10. If the DVD contains data beyond the physical size of a CD, you
        get I/O errors in the terminal, and dmesg reports lots of
        "attempt to access beyond end of device" errors."

which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).

The proper fix for that is probably to just do something like

	bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;

in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).

Cc: Peter Osterlund 
Cc: James Bottomley 
Cc: Matthew Wilcox 
Cc: Ingo Molnar 
Cc: Andrew Morton 
Signed-off-by: Linus Torvalds

[SCSI] SRP transport: only remove our own entries

2008-01-04T20:15:51+00:00

The SCSI SRP transport class currently iterates over all children
devices of the host that is being removed in srp_remove_host(). However,
not all of those children were created by the SRP transport, and
removing them will cause corruption and an oops when their creator tries
to remove them.

Signed-off-by: David Dillow 
Acked-by: FUJITA Tomonori 
Signed-off-by: James Bottomley

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

2008-01-03T19:59:27+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] scsi_sysfs: restore prep_fn when ULD is removed

scsi: revert "[SCSI] Get rid of scsi_cmnd->done"

2008-01-02T21:11:06+00:00

This reverts commit 6f5391c283d7fdcf24bf40786ea79061919d1e1d ("[SCSI]
Get rid of scsi_cmnd->done") that was supposed to be a cleanup commit,
but apparently it causes regressions:

  Bug 9370 - v2.6.24-rc2-409-g9418d5d: attempt to access beyond end of device
  http://bugzilla.kernel.org/show_bug.cgi?id=9370

this patch should be reintroduced in a more split-up form to make
testing of it easier.

Signed-off-by: Ingo Molnar 
Acked-by: Matthew Wilcox 
Cc: James Bottomley 
Signed-off-by: Linus Torvalds

[SCSI] scsi_sysfs: restore prep_fn when ULD is removed

2008-01-02T19:08:00+00:00

A recent bug report:

http://bugzilla.kernel.org/show_bug.cgi?id=9674

Was caused because the ULDs now set their own prep functions, but
don't necessarily reset the prep function back to the SCSI default
when they are removed.  This leads to panics if commands are sent to
the device after the module is removed because the prep_fn is still
pointing to the old module code.  The fix for this is to implement a
bus remove method that resets the prep_fn pointer correctly before
calling the ULD specific driver remove method.

Signed-off-by: James Bottomley