linux.git/drivers/scsi/scsi_error.c, branch v6.16

scsi: error: alua: I/O errors for ALUA state transitions

2025-06-10T02:02:13+00:00

When a host is configured with a few LUNs and I/O is running, injecting
FC faults repeatedly leads to path recovery problems.  The LUNs have 4
paths each and 3 of them come back active after say an FC fault which
makes 2 of the paths go down, instead of all 4. This happens after
several iterations of continuous FC faults.

Reason here is that we're returning an I/O error whenever we're
encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC
ACCESS STATE TRANSITION) instead of retrying.

Signed-off-by: Rajashekhar M A 
Signed-off-by: Hannes Reinecke 
Link: https://lore.kernel.org/r/20250606135924.27397-1-hare@kernel.org
Reviewed-by: Lee Duncan 
Signed-off-by: Martin K. Petersen

scsi: scsi_error: Add comments to scsi_check_sense()

2025-03-04T03:11:47+00:00

Add a comment block describing the COMPLETED case with ASC/ASCQ 0x55/0xA
to mention that it relates to command duration limits very special
policy 0xD command completion.

Signed-off-by: Damien Le Moal 
Link: https://lore.kernel.org/r/20250228031751.12083-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen

scsi: core: Add counters for New Media and Power On/Reset UNIT ATTENTIONs

2025-02-03T22:43:31+00:00

The purpose of the counters is to enable all ULDs attached to a device to
find out that a New Media or/and Power On/Reset Unit Attentions has/have
been set, even if another ULD catches the Unit Attention as response to a
SCSI command.

The ULDs can read the counters and see if the values have changed from the
previous check.

Signed-off-by: Kai Mäkisara 
Link: https://lore.kernel.org/r/20250120194925.44432-3-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini 
Tested-by: John Meneghini 
Signed-off-by: Martin K. Petersen

scsi: scsi_error: Add kernel-doc for exported functions

2025-01-10T20:15:02+00:00

Convert scsi_report_bus_reset() and scsi_report_device_reset() to
kernel-doc since they are exported. This allows them to be part of the
driver-api/scsi.rst docbook.

Signed-off-by: Randy Dunlap 
Link: https://lore.kernel.org/r/20241212205217.597844-2-rdunlap@infradead.org
CC: James E.J. Bottomley 
CC: Martin K. Petersen 
Signed-off-by: Martin K. Petersen

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

scsi: core: Move scsi_host_busy() out of host lock if it is for per-command

2024-02-05T21:15:20+00:00

Commit 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock
for waking up EH handler") intended to fix a hard lockup issue triggered by
EH. The core idea was to move scsi_host_busy() out of the host lock when
processing individual commands for EH. However, a suggested style change
inadvertently caused scsi_host_busy() to remain under the host lock. Fix
this by calling scsi_host_busy() outside the lock.

Fixes: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler")
Cc: Sathya Prakash Veerichetty 
Cc: Bart Van Assche 
Cc: Ewan D. Milne 
Signed-off-by: Ming Lei 
Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler

2024-01-24T02:21:51+00:00

Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host
lock every time for deciding if error handler kthread needs to be waken up.

This can be too heavy in case of recovery, such as:

 - N hardware queues

 - queue depth is M for each hardware queue

 - each scsi_host_busy() iterates over (N * M) tag/requests

If recovery is triggered in case that all requests are in-flight, each
scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called
for the last in-flight request, scsi_host_busy() has been run for (N * M -
1) times, and request has been iterated for (N*M - 1) * (N * M) times.

If both N and M are big enough, hard lockup can be triggered on acquiring
host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169).

Fix the issue by calling scsi_host_busy() outside the host lock. We don't
need the host lock for getting busy count because host the lock never
covers that.

[mkp: Drop unnecessary 'busy' variables pointed out by Bart]

Cc: Ewan Milne 
Fixes: 6eb045e092ef ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: Ming Lei 
Link: https://lore.kernel.org/r/20240112070000.4161982-1-ming.lei@redhat.com
Reviewed-by: Ewan D. Milne 
Reviewed-by: Sathya Prakash Veerichetty 
Tested-by: Sathya Prakash Veerichetty 
Reviewed-by: Bart Van Assche 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-01-20T17:42:32+00:00

Pull SCSI updates from James Bottomley:
 "Final round of fixes that came in too late to send in the first
  request.

  It's nine bug fixes and one version update (because of a bug fix) and
  one set of PCI ID additions. There's one bug fix in the core which is
  really a one liner (except that an additional sdev pointer was added
  for convenience) and the rest are in drivers"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: core: Add TMF to tmr_list handling
  scsi: core: Kick the requeue list after inserting when flushing
  scsi: fnic: unlock on error path in fnic_queuecommand()
  scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode()
  scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings
  scsi: smartpqi: Bump driver version to 2.1.26-030
  scsi: smartpqi: Fix logical volume rescan race condition
  scsi: smartpqi: Add new controller PCI IDs
  scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()
  scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan()
  scsi: ufs: core: Simplify power management during async scan

scsi: core: Kick the requeue list after inserting when flushing

2024-01-12T02:37:43+00:00

When libata calls ata_link_abort() to abort all ata queued commands, it
calls blk_abort_request() on the SCSI command representing each QC.

This causes scsi_timeout() to be called, which calls scsi_eh_scmd_add() for
each SCSI command.

scsi_eh_scmd_add() sets the SCSI host to state recovery, and then adds the
command to shost->eh_cmd_q.

This will wake up the SCSI EH, and eventually the libata EH strategy
handler will be called, which calls scsi_eh_flush_done_q() to either flush
retry or flush finish each failed command.

The commands that are flush retried by scsi_eh_flush_done_q() are done so
using scsi_queue_insert().

Before commit 8b566edbdbfb ("scsi: core: Only kick the requeue list if
necessary"), __scsi_queue_insert() called blk_mq_requeue_request() with the
second argument set to true, indicating that it should always kick/run the
requeue list after inserting.

After commit 8b566edbdbfb ("scsi: core: Only kick the requeue list if
necessary"), __scsi_queue_insert() does not kick/run the requeue list after
inserting, if the current SCSI host state is recovery (which is the case in
the libata example above).

This optimization is probably fine in most cases, as I can only assume that
most often someone will eventually kick/run the queues.

However, that is not the case for scsi_eh_flush_done_q(), where we can see
that the request gets inserted to the requeue list, but the queue is never
started after the request has been inserted, leading to the block layer
waiting for the completion of command that never gets to run.

Since scsi_eh_flush_done_q() is called by SCSI EH context, the SCSI host
state is most likely always in recovery when this function is called.

Thus, let scsi_eh_flush_done_q() explicitly kick the requeue list after
inserting a flush retry command, so that scsi_eh_flush_done_q() keeps the
same behavior as before commit 8b566edbdbfb ("scsi: core: Only kick the
requeue list if necessary").

Simple reproducer for the libata example above:
$ hdparm -Y /dev/sda
$ echo 1 > /sys/class/scsi_device/0\:0\:0\:0/device/delete

Fixes: 8b566edbdbfb ("scsi: core: Only kick the requeue list if necessary")
Reported-by: Kevin Locke 
Closes: https://lore.kernel.org/linux-scsi/ZZw3Th70wUUvCiCY@kevinlocke.name/
Signed-off-by: Niklas Cassel 
Link: https://lore.kernel.org/r/20240111120533.3612509-1-cassel@kernel.org
Reviewed-by: Bart Van Assche 
Reviewed-by: Damien Le Moal 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-01-11T22:24:32+00:00

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
  hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.

  This time around there's only a single line update to the core, so
  nothing major and barely anything minor"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
  scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
  scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
  scsi: ufs: qcom: Fix ESI vector mask
  scsi: ufs: host: Fix kernel-doc warning
  scsi: hisi_sas: Correct the number of global debugfs registers
  scsi: hisi_sas: Rollback some operations if FLR failed
  scsi: hisi_sas: Check before using pointer variables
  scsi: hisi_sas: Replace with standard error code return value
  scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
  scsi: ufs: core: Add sysfs node for UFS RTC update
  scsi: ufs: core: Add UFS RTC support
  scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
  scsi: ufs: qcom: Remove unused definitions
  scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
  scsi: ufs: qcom: Remove support for host controllers older than v2.0
  scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
  scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
  scsi: ufs: qcom: Sort includes alphabetically
  scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
  scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
  ...