Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, pm80xx, lpfc,
  mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes.

  The most impactful change is likely the switch from GFP_DMA to
  GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too
  many people"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (121 commits)
  scsi: mpi3mr: Bump driver version to 8.0.0.61.0
  scsi: mpi3mr: Fixes around reply request queues
  scsi: mpi3mr: Enhanced Task Management Support Reply handling
  scsi: mpi3mr: Use TM response codes from MPI3 headers
  scsi: mpi3mr: Add io_uring interface support in I/O-polled mode
  scsi: mpi3mr: Print cable mngnt and temp threshold events
  scsi: mpi3mr: Support Prepare for Reset event
  scsi: mpi3mr: Add Event acknowledgment logic
  scsi: mpi3mr: Gracefully handle online FW update operation
  scsi: mpi3mr: Detect async reset that occurred in firmware
  scsi: mpi3mr: Add IOC reinit function
  scsi: mpi3mr: Handle offline FW activation in graceful manner
  scsi: mpi3mr: Code refactor of IOC init - part2
  scsi: mpi3mr: Code refactor of IOC init - part1
  scsi: mpi3mr: Fault IOC when internal command gets timeout
  scsi: mpi3mr: Display IOC firmware package version
  scsi: mpi3mr: Handle unaligned PLL in unmap cmnds
  scsi: mpi3mr: Increase internal cmnds timeout to 60s
  scsi: mpi3mr: Do access status validation before adding devices
  scsi: mpi3mr: Add support for PCIe Managed Switch SES device
  ...

Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait
given that it is unused now.  Also convert the boolean at_head parameter
to actually use the bool type while touching the prototype.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In some scenarios START STOP UNIT may time out. The default recovery
time of 30 seconds is relatively large. Modifying rq_timeout to adjust
the START STOP UNIT timeout value will affect the regular I/O.

Commit 9728c0814ecb ("[SCSI] make scsi_eh_try_stu use block timeout")
switched to rq_timeout for the START STOP UNIT command. However commit
0816c9251a71 ("[SCSI] Allow error handling timeout to be specified")
introduced an explicit eh_timeout parameter. It makes more sense to
use this value as the timeout for START STOP UNIT.

Link: https://lore.kernel.org/r/1636507412-21678-1-git-send-email-brookxu.cn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Simplify the nested conditionals in the function by using a label for the
error path.  Introduce local "shost" to avoid repeated "sdev->shost" usage.
Also remove scsi_eh_complete_abort() since there is now only one place it
would be called.

Link: https://lore.kernel.org/r/20211029194311.17504-3-emilne@redhat.com
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code but it also has two driver updates: ufs and qla2xxx"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  scsi: scsi_debug: Don't call kcalloc() if size arg is zero
  scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
  scsi: scsi_ioctl: Validate command size
  scsi: ufs: ufshpb: Properly handle max-single-cmd
  scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
  scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
  scsi: sr: Remove duplicate assignment
  scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
  scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
  scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
  scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
  scsi: ufs: ufs-exynos: Factor out priv data init
  scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
  scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
  scsi: ufs: ufs-exynos: Add setup_clocks callback
  scsi: ufs: ufs-exynos: Add refclkout_stop control
  scsi: ufs: ufs-exynos: Simplify drv_data retrieval
  scsi: ufs: ufs-exynos: Change pclk available max value
  scsi: ufs: Add quirk to enable host controller without PH configuration
  scsi: ufs: Add quirk to handle broken UIC command
  ...

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...

The changes to issue the abort from the scmd->abort_work instead of the EH
thread introduced a problem if eh_deadline is used.  If aborting the
command(s) is successful, and there are never any scmds added to the
shost->eh_cmd_q, there is no code path which will reset the ->last_reset
value back to zero.

The effect of this is that after a successful abort with no EH thread
activity, a subsequent timeout, perhaps a long time later, might
immediately be considered past a user-set eh_deadline time, and the host
will be reset with no attempt at recovery.

Fix this by resetting ->last_reset back to zero in scmd_eh_abort_handler()
if it is determined that the EH thread will not run to do this.

Thanks to Gopinath Marappan for investigating this problem.

Link: https://lore.kernel.org/r/20211029194311.17504-2-emilne@redhat.com
Fixes: e494f6a72839 ("[SCSI] improved eh timeout handler")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.

Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Conditional statements are faster than indirect calls. Use a structure
member to track the SCSI command submitter such that later patches can call
scsi_done(scmd) instead of scmd->scsi_done(scmd).

The asymmetric behavior that scsi_send_eh_cmnd() sets the submission
context to the SCSI error handler and that it does not restore the
submission context to the SCSI core is retained.

Link: https://lore.kernel.org/r/20211007202923.2174984-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>