linux.git/drivers/scsi/scsi_error.c, branch v4.14

scsi: ILLEGAL REQUEST + ASC==27 => target failure

2017-09-28T01:55:21+00:00

ASC 0x27 is "WRITE PROTECTED". This error code is returned e.g.  by
Fujitsu ETERNUS systems under certain conditions for WRITE SAME 16
commands with UNMAP bit set. It should not be treated as a path
error. In general, it makes sense to assume that being write protected
is a target rather than a path property.

Signed-off-by: Martin Wilck 
Acked-by: Lee Duncan 
Signed-off-by: Martin K. Petersen

scsi: Use blk_mq_rq_to_pdu() to convert a request to a SCSI command pointer

2017-08-25T21:08:07+00:00

Since commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as
part of struct request") struct request and struct scsi_cmnd are
adjacent. This means that there is now an alternative to reading
req->special to convert a pointer to a prepared request into a
SCSI command pointer, namely by using blk_mq_rq_to_pdu(). Make
this change where appropriate. Although this patch does not
change any functionality, it slightly improves performance and
slightly improves readability.

Signed-off-by: Bart Van Assche 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: Suppress gcc 7 fall-through warnings reported with W=1

2017-08-25T21:08:07+00:00

The conclusion of a recent discussion about the new warnings
reported by gcc 7 is that the new warnings reported when building
with W=1 should be suppressed. However, gcc 7 still warns about
fall-through in switch statements when building with W=1. Suppress
these warnings by annotating the SCSI core properly.

See also Linus Torvalds, Lots of new warnings with gcc-7.1.1, 11
July 2017 (https://www.mail-archive.com/linux-media@vger.kernel.org/msg115428.html).

References: commit bd664f6b3e37 ("disable new gcc-7.1.1 warnings for now")
Signed-off-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-07-06T19:10:33+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
  qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
  a host of minor and miscellaneous changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits)
  qla2xxx: Fix NVMe entry_type for iocb packet on BE system
  scsi: qla2xxx: avoid unused-function warning
  scsi: snic: fix a couple of spelling mistakes/typos
  scsi: qla2xxx: fix a bunch of typos and spelling mistakes
  scsi: lpfc: don't double count abort errors
  scsi: lpfc: spin_lock_irq() is not nestable
  scsi: hisi_sas: optimise DMA slot memory
  scsi: ibmvfc: constify dev_pm_ops structures.
  scsi: ibmvscsi: constify dev_pm_ops structures.
  scsi: cxlflash: Update debug prints in reset handlers
  scsi: cxlflash: Update send_tmf() parameters
  scsi: cxlflash: Avoid double free of character device
  scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state
  scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
  scsi: ufs: flush eh_work when eh_work scheduled.
  scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock
  scsi: sun_esp: fix device reference leaks
  scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init
  scsi: fnic: correct speed display and add support for 25,40 and 100G
  scsi: fnic: added timestamp reporting in fnic debug stats
  ...

block: Make most scsi_req_init() calls implicit

2017-06-21T01:27:14+00:00

Instead of explicitly calling scsi_req_init() after blk_get_request(),
call that function from inside blk_get_request(). Add an
.initialize_rq_fn() callback function to the block drivers that need
it. Merge the IDE .init_rq_fn() function into .initialize_rq_fn()
because it is too small to keep it as a separate function. Keep the
scsi_req_init() call in ide_prep_sense() because it follows a
blk_rq_init() call.

References: commit 82ed4db499b8 ("block: split scsi_request out of struct request")
Signed-off-by: Bart Van Assche 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Omar Sandoval 
Cc: Nicholas Bellinger 
Signed-off-by: Jens Axboe

scsi: Protect SCSI device state changes with a mutex

2017-06-13T00:55:59+00:00

Serializing SCSI device state changes avoids that two state changes can
occur concurrently, e.g. the state changes in scsi_target_block() and
__scsi_remove_device(). This serialization is essential to make patch
"Make __scsi_remove_device go straight from BLOCKED to DEL" work
reliably.

Enable this mechanism for all scsi_target_*block() callers but not for
the scsi_internal_device_unblock() calls from the mpt3sas driver because
that driver can call scsi_internal_device_unblock() from atomic context.

Signed-off-by: Bart Van Assche 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Johannes Thumshirn 
Signed-off-by: Martin K. Petersen

block: introduce new block status code type

2017-06-09T15:27:32+00:00

Currently we use nornal Linux errno values in the block layer, and while
we accept any error a few have overloaded magic meanings.  This patch
instead introduces a new  blk_status_t value that holds block layer specific
status codes and explicitly explains their meaning.  Helpers to convert from
and to the previous special meanings are provided for now, but I suspect
we want to get rid of them in the long run - those drivers that have a
errno input (e.g. networking) usually get errnos that don't know about
the special block layer overloads, and similarly returning them to userspace
will usually return somethings that strictly speaking isn't correct
for file system operations, but that's left as an exercise for later.

For now the set of errors is a very limited set that closely corresponds
to the previous overloaded errno values, but there is some low hanging
fruite to improve it.

blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse
typechecking, so that we can easily catch places passing the wrong values.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-05-04T19:19:44+00:00

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...

scsi: Improve scsi_get_sense_info_fld

2017-04-25T17:00:56+00:00

Use get_unaligned_be32 and get_unaligned_be64 to obtain values from the
sense buffer instead of open coding the operations.  Also change the
function return value to a bool and fix the function signature
declaration to remove spaces triggering checkpatch warnings.

No functional change is introduced by this patch.

Signed-off-by: Damien Le Moal 
Reviewed-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: make asynchronous aborts mandatory

2017-04-06T17:07:33+00:00

There hasn't been any reports for HBAs where asynchronous abort
would not work, so we should make it mandatory and remove
the fallback.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen