linux.git/drivers/scsi/scsi_error.c, branch v4.12

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-05-04T19:19:44+00:00

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...

scsi: Improve scsi_get_sense_info_fld

2017-04-25T17:00:56+00:00

Use get_unaligned_be32 and get_unaligned_be64 to obtain values from the
sense buffer instead of open coding the operations.  Also change the
function return value to a bool and fix the function signature
declaration to remove spaces triggering checkpatch warnings.

No functional change is introduced by this patch.

Signed-off-by: Damien Le Moal 
Reviewed-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: make asynchronous aborts mandatory

2017-04-06T17:07:33+00:00

There hasn't been any reports for HBAs where asynchronous abort
would not work, so we should make it mandatory and remove
the fallback.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: make scsi_eh_scmd_add() always succeed

2017-04-06T17:07:33+00:00

scsi_eh_scmd_add() currently only will fail if no
error handler thread is started (which will never be the
case) or if the state machine encounters an illegal transition.

But if we're encountering an invalid state transition
chances is we cannot fixup things with the error handler.
So better add a WARN_ON for illegal host states and
make scsi_dh_scmd_add() a void function.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Bart Van Assche 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: make eh_eflags persistent

2017-04-06T17:07:33+00:00

If a failed command is retried and fails again we need
to enter SCSI EH, otherwise we will never be able to
recover the command.
To detect this situation we must not clear scmd->eh_eflags
when EH finishes but rather make it persistent throughout
the lifetime of the command.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Benjamin Block 
Reviewed-by: Bart Van Assche 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: always send command aborts

2017-04-06T17:07:32+00:00

When a command has timed out we always should be sending an
abort; with the previous code a failed abort might signal
SCSI EH to start, and all other timed out commands will
never be aborted, even though they might belong to a
different ITL nexus.

Cc: Benjamin Block 
Signed-off-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

scsi: scsi_error: count medium access timeout only once per EH run

2017-04-06T17:07:32+00:00

The current medium access timeout counter will be increased for
each command, so if there are enough failed commands we'll hit
the medium access timeout for even a single device failure and
the following kernel message is displayed:

sd H:C:T:L: [sdXY] Medium access timeout failure. Offlining disk!

Fix this by making the timeout per EH run, ie the counter will
only be increased once per device and EH run.

Fixes: 18a4d0a ("[SCSI] Handle disk devices which can not process medium access commands")
Cc: Ewan Milne 
Cc: Lawrence Obermann 
Cc: Benjamin Block 
Cc: Steffen Maier 
Signed-off-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Martin K. Petersen

block, scsi: move the retries field to struct scsi_request

2017-04-05T18:05:08+00:00

Instead of bloating the generic struct request with it.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Jens Axboe

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-02-21T19:51:42+00:00

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (ncr5380,
  ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid,
  megaraid_sas, ...).

  There's also an assortment of minor fixes and the major update of
  switching a bunch of drivers to pci_alloc_irq_vectors from Christoph"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits)
  scsi: megaraid_sas: handle dma_addr_t right on 32-bit
  scsi: megaraid_sas: array overflow in megasas_dump_frame()
  scsi: snic: switch to pci_irq_alloc_vectors
  scsi: megaraid_sas: driver version upgrade
  scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2
  scsi: megaraid_sas: Indentation and smatch warning fixes
  scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints
  scsi: megaraid_sas: Increase internal command pool
  scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete
  scsi: megaraid_sas: Bail out the driver load if ld_list_query fails
  scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void
  scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR
  scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool
  scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion
  scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero
  scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate
  scsi: megaraid_sas: update can_queue only if the new value is less
  scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions
  scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID
  scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD
  ...

scsi: remove eh_timed_out methods in the transport template

2017-02-07T00:10:03+00:00

Instead define the timeout behavior purely based on the host_template
eh_timed_out method and wire up the existing transport implementations
in the host templates.  This also clears up the confusion that the
transport template method overrides the host template one, so some
drivers have to re-override the transport template one.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Tyrel Datwyler 
Signed-off-by: Martin K. Petersen