comp_write_worker() returns true when the compared data matches.
memcmp() returns zero for equal data and non-zero for different data, so
its result must be negated before it is stored in a bool.

The first segment already uses !memcmp(), but the wrapped segment uses
memcmp() directly, reversing the match result. Use !memcmp() there as
well.

Fixes: 38d5c8336e60 ("scsi_debug: add Report supported opcodes+tmfs; Compare and write")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/E5AD42E9C0E18633+20260803095328.3445311-1-raoxu@uniontech.com
Signed-off-by: Martin K. Petersen (Oracle) <mkp@kernel.org>

resp_report_zones() sizes the reply buffer from the CDB allocation
length. The v3 fix rounds alloc_len up with ALIGN() before deriving the
descriptor count:

	rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) -
			 RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD);
	arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1);

For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to
0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit
and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which
passes the !arr check, and desc = arr + 64 is then dereferenced in the
loop -> out-of-bounds write / panic.

Clamp rep_max_zones to devip->nr_zones. The loop already stops at
sdebug_capacity (after nr_zones zones), so a report can never hold more
than nr_zones descriptors; the clamp does not change the report, it only
bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device
property that can never reach 0x100000000.

Fixes: 7db0e0c8190a ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260712183739.83915-1-security@auditcode.ai
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull in outstanding commits from 7.1 branch.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The tape setup path uses one tape_block entry as the end-of-data marker
after the usable tape blocks. For the one-partition layout, partition 0
uses all TAPE_UNITS data slots and partition 1's marker is written at
tape_blocks[0] + TAPE_UNITS.

Only TAPE_UNITS entries are allocated, so that marker write is one
element past the allocation during device initialization before any
command is issued.

Allocate one extra tape_block entry for the marker. This keeps the
existing partitioning paths unchanged while providing backing storage
for the sentinel.

Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Reviewed-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://patch.msgid.link/20260604234724.1936118-1-sam.moelius@trailofbits.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The static variable sdebug_any_injecting_opt is no longer read. Commit
3a90a63d02b8 ("scsi: scsi_debug: every_nth triggered error injection")
removed all code that reads this variable. Hence, also remove this
variable itself. Remove SDEBUG_OPT_ALL_INJECTING because there is no
code left that uses this constant if sdebug_any_injecting_opt is
removed. This has been detected by building the scsi_debug driver with
the git HEAD version of Clang and with W=1.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260520171454.4035623-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A "\n" at the end of the sdev_printk() string appears to have been
inadvertently removed.  Add it back for correct log message formatting.

Fixes: a743b120227a ("scsi: scsi_debug: Stop printing extra function name in debug logs")
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260519205356.1040855-1-emilne@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>

Pull SCSI updates from James Bottomley:
 "Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
  cleanups and fixes.

  The biggest core change is the massive code motion in the sd driver to
  remove forward declarations and the most significant change is to
  enumify the queuecommand return"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
  scsi: csiostor: Fix dereference of null pointer rn
  scsi: buslogic: Reduce stack usage
  scsi: ufs: host: mediatek: Require CONFIG_PM
  scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
  scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
  scsi: mpi3mr: Make driver probing asynchronous
  scsi: ufs: core: Flush exception handling work when RPM level is zero
  scsi: efct: Use IRQF_ONESHOT and default primary handler
  scsi: ufs: core: Use a host-wide tagset in SDB mode
  scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
  scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
  scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
  scsi: mpi3mr: Driver version update to 8.17.0.3.50
  scsi: mpi3mr: Fixed the W=1 compilation warning
  scsi: mpi3mr: Record and report controller firmware faults
  scsi: mpi3mr: Update MPI Headers to revision 39
  scsi: mpi3mr: Use negotiated link rate from DevicePage0
  scsi: mpi3mr: Avoid redundant diag-fault resets
  scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
  scsi: mpi3mr: Add module parameter to control threaded IRQ polling
  ...