linux.git/drivers/scsi/scsi_debug.c, branch v5.17

scsi: scsi_debug: Fix buffer size of REPORT ZONES command

2021-12-07T03:04:35+00:00

According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure.  Fix the
failure by handling ALLOCATION LENGTH as byte unit.

Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal 
Signed-off-by: Shin'ichiro Kawasaki 
Signed-off-by: Martin K. Petersen

scsi: scsi_debug: Zero clear zones at reset write pointer

2021-11-23T03:27:51+00:00

When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_debug
returns any data written before the write pointer was reset. This is an
error and prevents using scsi_debug for stale page cache testing of the
BLKRESETZONE ioctl.

Zero written data in the zone when resetting the write pointer.

Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal 
Acked-by: Douglas Gilbert 
Signed-off-by: Shin'ichiro Kawasaki 
Signed-off-by: Martin K. Petersen

scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()

2021-11-23T03:16:09+00:00

In resp_mode_select() sanity check the block descriptor len to avoid UAF.

BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032

CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
 
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113

Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller 
Acked-by: Douglas Gilbert 
Signed-off-by: George Kennedy 
Signed-off-by: Martin K. Petersen

scsi: scsi_debug: Fix type in min_t to avoid stack OOB

2021-11-19T03:05:58+00:00

Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707

CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
 memcpy+0x23/0x60 mm/kasan/shadow.c:65
 memcpy include/linux/fortify-string.h:191 [inline]
 sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
 resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
 scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller 
Acked-by: Douglas Gilbert 
Signed-off-by: George Kennedy 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2021-11-12T20:25:50+00:00

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code but it also has two driver updates: ufs and qla2xxx"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  scsi: scsi_debug: Don't call kcalloc() if size arg is zero
  scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
  scsi: scsi_ioctl: Validate command size
  scsi: ufs: ufshpb: Properly handle max-single-cmd
  scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
  scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
  scsi: sr: Remove duplicate assignment
  scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
  scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
  scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
  scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
  scsi: ufs: ufs-exynos: Factor out priv data init
  scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
  scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
  scsi: ufs: ufs-exynos: Add setup_clocks callback
  scsi: ufs: ufs-exynos: Add refclkout_stop control
  scsi: ufs: ufs-exynos: Simplify drv_data retrieval
  scsi: ufs: ufs-exynos: Change pclk available max value
  scsi: ufs: Add quirk to enable host controller without PH configuration
  scsi: ufs: Add quirk to handle broken UIC command
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2021-11-05T15:42:02+00:00

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...

scsi: scsi_debug: Don't call kcalloc() if size arg is zero

2021-11-05T03:41:21+00:00

If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR.  Because of
that, for a following NULL pointer check to work on the returned pointer,
kcalloc() must not be called with the size arg equal to zero. Return early
without error before the kcalloc() call if size arg is zero.

BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789

CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
 __kasan_report mm/kasan/report.c:446 [inline]
 kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
 memcpy+0x3b/0x60 mm/kasan/shadow.c:66
 memcpy include/linux/fortify-string.h:191 [inline]
 sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
 do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline]
 do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline]
 resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276
 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
 scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
 blk_execute_rq+0xdb/0x360 block/blk-exec.c:102
 sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline]
 scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930
 sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112
 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller 
Acked-by: Douglas Gilbert 
Signed-off-by: George Kennedy 
Signed-off-by: Martin K. Petersen

scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()

2021-10-19T02:38:35+00:00

The following issue was observed running syzkaller:

BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815

CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe4/0x14a lib/dump_stack.c:118
 print_address_description+0x73/0x280 mm/kasan/report.c:253
 kasan_report_error mm/kasan/report.c:352 [inline]
 kasan_report+0x272/0x370 mm/kasan/report.c:410
 memcpy+0x1f/0x50 mm/kasan/kasan.c:302
 memcpy include/linux/string.h:377 [inline]
 sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
 __blk_run_queue_uncond block/blk-core.c:464 [inline]
 __blk_run_queue+0x1a4/0x380 block/blk-core.c:484
 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
 sg_write+0x64/0xa0 drivers/scsi/sg.c:622
 __vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
 vfs_write+0x184/0x4c0 fs/read_write.c:549
 ksys_write+0x107/0x240 fs/read_write.c:599
 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.

Switch n, alen, and rlen to u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert 
Signed-off-by: Ye Bin 
Signed-off-by: Martin K. Petersen

scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()

2021-10-19T02:38:35+00:00

The following warning was observed running syzkaller:

[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724]    program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995]  dump_stack+0x108/0x15f
[ 3813.847524]  print_address_description+0xa5/0x372
[ 3813.848243]  kasan_report.cold+0x236/0x2a8
[ 3813.849439]  check_memory_region+0x240/0x270
[ 3813.850094]  memcpy+0x30/0x80
[ 3813.850553]  sg_copy_buffer+0x157/0x1e0
[ 3813.853032]  sg_copy_from_buffer+0x13/0x20
[ 3813.853660]  fill_from_dev_buffer+0x135/0x370
[ 3813.854329]  resp_readcap16+0x1ac/0x280
[ 3813.856917]  schedule_resp+0x41f/0x1630
[ 3813.858203]  scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699]  scsi_dispatch_cmd+0x330/0x950
[ 3813.863329]  scsi_request_fn+0xd8e/0x1710
[ 3813.863946]  __blk_run_queue+0x10b/0x230
[ 3813.864544]  blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220]  sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637]  sg_write+0x6c8/0xef0
[ 3813.878853]  __vfs_write+0xe4/0x800
[ 3813.883487]  vfs_write+0x17b/0x530
[ 3813.884008]  ksys_write+0x103/0x270
[ 3813.886268]  __x64_sys_write+0x77/0xc0
[ 3813.886841]  do_syscall_64+0x106/0x360
[ 3813.887415]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

This issue can be reproduced with the following syzkaller log:

r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)

In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().

To solve this issue, define alloc_len as u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com
Acked-by: Douglas Gilbert 
Signed-off-by: Ye Bin 
Signed-off-by: Martin K. Petersen

block: rename REQ_HIPRI to REQ_POLLED

2021-10-18T12:17:36+00:00

Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague,
the bio flag is specific to the polling implementation, so rename and
document it properly.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Sagi Grimberg 
Reviewed-by: Chaitanya Kulkarni 
Tested-by: Mark Wunderlich 
Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de
Signed-off-by: Jens Axboe