linux.git/drivers/scsi/pas16.c, branch master

scsi: pas16: remove from tree

2016-09-27T00:49:24+00:00

The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Hannes Reinicke 
Acked-by: Finn Thain 
Signed-off-by: Martin K. Petersen

ncr5380: Remove DONT_USE_INTR and AUTOPROBE_IRQ macros

2016-04-11T20:57:09+00:00

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Tested-by: Ondrej Zary 
Signed-off-by: Martin K. Petersen

ncr5380: Merge DMA implementation from atari_NCR5380 core driver

2016-04-11T20:57:09+00:00

Adopt the DMA implementation from atari_NCR5380.c. This means that
atari_scsi and sun3_scsi can make use of the NCR5380.c core driver
and the atari_NCR5380.c driver fork can be made redundant.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Tested-by: Ondrej Zary 
Signed-off-by: Martin K. Petersen

ncr5380: Use DMA hooks for PDMA

2016-04-11T20:57:09+00:00

Those wrapper drivers which use DMA define the REAL_DMA macro and
those which use pseudo DMA define PSEUDO_DMA. These macros need to be
removed for a number of reasons, not least of which is to have drivers
share more code.

Redefine the PDMA send and receive hooks as DMA setup hooks, so that the
DMA code can be shared by all 5380 wrapper drivers. This will help to
reunify the forked core driver.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Tested-by: Ondrej Zary 
Signed-off-by: Martin K. Petersen

ncr5380: Remove PSEUDO_DMA macro

2016-04-11T20:57:09+00:00

For those wrapper drivers which only implement Programmed IO, have
NCR5380_dma_xfer_len() evaluate to zero. That allows PDMA to be easily
disabled at run-time and so the PSEUDO_DMA macro is no longer needed.

Also remove the spin counters used for debugging pseudo DMA drivers.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Tested-by: Ondrej Zary 
Signed-off-by: Martin K. Petersen

ncr5380: Disable the DMA errata workaround flag by default

2016-04-11T20:57:09+00:00

The only chip that needs the workarounds enabled is an early NMOS
device. That means that the common case is to disable them.

Unfortunately the sense of the flag is such that it has to be set
for the common case.

Rename the flag so that zero can be used to mean "no errata workarounds
needed". This simplifies the code.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Tested-by: Ondrej Zary 
Signed-off-by: Martin K. Petersen

ncr5380: Fix soft lockups

2016-01-07T02:43:09+00:00

Because of the rudimentary design of the chip, it is necessary to poll the
SCSI bus signals during PIO and this tends to hog the CPU. The driver will
accept new commands while others execute, and this causes a soft lockup
because the workqueue item will not terminate until the issue queue is
emptied.

When exercising dmx3191d using sequential IO from dd, the driver is sent
512 KiB WRITE commands and 128 KiB READs. For a PIO transfer, the rate is
is only about 300 KiB/s, so these are long-running commands. And although
PDMA may run at several MiB/s, interrupts are disabled for the duration
of the transfer.

Fix the unresponsiveness and soft lockup issues by calling cond_resched()
after each command is completed and by limiting max_sectors for drivers
that don't implement real DMA.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Ondrej Zary 
Tested-by: Michael Schmitz 
Signed-off-by: Martin K. Petersen

ncr5380: Use standard list data structure

2016-01-07T02:43:07+00:00

The NCR5380 drivers have a home-spun linked list implementation for
scsi_cmnd structs that uses cmd->host_scribble as a 'next' pointer. Adopt
the standard list_head data structure and list operations instead. Remove
the eh_abort_handler rather than convert it. Doing the conversion would
only be churn because the existing EH handlers don't work and get replaced
in a subsequent patch.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Ondrej Zary 
Tested-by: Michael Schmitz 
Signed-off-by: Martin K. Petersen

ncr5380: Fix and cleanup scsi_host_template initializers

2016-01-07T02:43:03+00:00

Add missing .module initializer. Use distinct .proc_name values for the
g_NCR5380 and g_NCR5380_mmio modules. Remove pointless CAN_QUEUE and
CMD_PER_LUN override macros. Cleanup whitespace and code style.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Ondrej Zary 
Tested-by: Michael Schmitz 
Signed-off-by: Martin K. Petersen

ncr5380: Cleanup #include directives

2016-01-07T02:43:02+00:00

Remove unused includes (stat.h, signal.h, proc_fs.h) and move includes
needed by the core drivers into the common header (delay.h etc).

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Ondrej Zary 
Tested-by: Michael Schmitz 
Signed-off-by: Martin K. Petersen