The BUG_ON() recently introduced in lpfc_sli_ringtxcmpl_put() is hit in
the lpfc_els_abort() > lpfc_sli_issue_abort_iotag() >
lpfc_sli_abort_iotag_issue() function path [similar names], due to
'piocb->vport == NULL':

	BUG_ON(!piocb || !piocb->vport);

This happens because lpfc_sli_abort_iotag_issue() doesn't set the
'abtsiocbp->vport' pointer -- but this is not the problem.

Previously, lpfc_sli_ringtxcmpl_put() accessed 'piocb->vport' only if
'piocb->iocb.ulpCommand' is neither CMD_ABORT_XRI_CN nor
CMD_CLOSE_XRI_CN, which are the only possible values for
lpfc_sli_abort_iotag_issue():

    lpfc_sli_ringtxcmpl_put():

        if ((unlikely(pring->ringno == LPFC_ELS_RING)) &&
           (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
           (piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN) &&
            (!(piocb->vport->load_flag & FC_UNLOADING)))

    lpfc_sli_abort_iotag_issue():

        if (phba->link_state >= LPFC_LINK_UP)
                iabt->ulpCommand = CMD_ABORT_XRI_CN;
        else
                iabt->ulpCommand = CMD_CLOSE_XRI_CN;

So, this function path would not have hit this possible NULL pointer
dereference before.

In order to fix this regression, move the second part of the BUG_ON()
check prior to the pointer dereference that it does check for.

For reference, this is the stack trace observed. The problem happened
because an unsolicited event was received - a PLOGI was received after
our PLOGI was issued but not yet complete, so the discovery state
machine goes on to sw-abort our PLOGI.

    kernel BUG at drivers/scsi/lpfc/lpfc_sli.c:1326!
    Oops: Exception in kernel mode, sig: 5 [#1]
    <...>
    NIP [...] lpfc_sli_ringtxcmpl_put+0x1c/0xf0 [lpfc]
    LR  [...] __lpfc_sli_issue_iocb_s4+0x188/0x200 [lpfc]
    Call Trace:
    [...] [...] __lpfc_sli_issue_iocb_s4+0xb0/0x200 [lpfc] (unreliable)
    [...] [...] lpfc_sli_issue_abort_iotag+0x2b4/0x350 [lpfc]
    [...] [...] lpfc_els_abort+0x1a8/0x4a0 [lpfc]
    [...] [...] lpfc_rcv_plogi+0x6d4/0x700 [lpfc]
    [...] [...] lpfc_rcv_plogi_plogi_issue+0xd8/0x1d0 [lpfc]
    [...] [...] lpfc_disc_state_machine+0xc0/0x2b0 [lpfc]
    [...] [...] lpfc_els_unsol_buffer+0xcc0/0x26c0 [lpfc]
    [...] [...] lpfc_els_unsol_event+0xa8/0x220 [lpfc]
    [...] [...] lpfc_complete_unsol_iocb+0xb8/0x138 [lpfc]
    [...] [...] lpfc_sli4_handle_received_buffer+0x6a0/0xec0 [lpfc]
    [...] [...] lpfc_sli_handle_slow_ring_event_s4+0x1c4/0x240 [lpfc]
    [...] [...] lpfc_sli_handle_slow_ring_event+0x24/0x40 [lpfc]
    [...] [...] lpfc_do_work+0xd88/0x1970 [lpfc]
    [...] [...] kthread+0x108/0x130
    [...] [...] ret_from_kernel_thread+0x5c/0xbc
    <...>

Cc: stable@vger.kernel.org # v4.8
Fixes: 22466da5b4b7 ("lpfc: Fix possible NULL pointer dereference")
Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We get a few warnings when building kernel with W=1:
drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes]
drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.  So this
patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull SCSI fixes from James Bottomley:
 "This is seven basic fixes (plus one MAINTAINER update) which came in
  close to the merge window"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  ipr: Fix error return code in ipr_probe_ioa()
  fcoe: add missing destroy_workqueue() on error in fcoe_init()
  lpfc: Fix possible NULL pointer dereference
  fcoe: Use default VLAN for FIP VLAN discovery
  ipr: Wait to do async scan until scsi host is initialized
  MAINTAINERS: Update cxlflash maintainers
  cxlflash: Verify problem state area is mapped before notifying shutdown
  lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()

Pull PCI updates from Bjorn Helgaas:
 "Highlights:

   - ARM64 support for ACPI host bridges

   - new drivers for Axis ARTPEC-6 and Marvell Aardvark

   - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx

   - pci_resource_to_user() cleanup (more to come)

  Detailed summary:

  Enumeration:
   - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
   - Add parent device field to ECAM struct pci_config_window (Jayachandran C)
   - Add generic MCFG table handling (Tomasz Nowicki)
   - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
   - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)

  Resource management:
   - Add devm_request_pci_bus_resources() (Bjorn Helgaas)
   - Unify pci_resource_to_user() declarations (Bjorn Helgaas)
   - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
   - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
   - Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
   - Ignore write combining when mapping I/O port space (Bjorn Helgaas)
   - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
   - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
   - Support I/O resources when parsing host bridge resources (Jayachandran C)
   - Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
   - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
   - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
   - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
   - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
   - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
   - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
   - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)

  PCI device hotplug:
   - Allow additional bus numbers for hotplug bridges (Keith Busch)
   - Ignore interrupts during D3cold (Lukas Wunner)

  Power management:
   - Enforce type casting for pci_power_t (Andy Shevchenko)
   - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
   - Put PCIe ports into D3 during suspend (Mika Westerberg)
   - Power on bridges before scanning new devices (Mika Westerberg)
   - Runtime resume bridge before rescan (Mika Westerberg)
   - Add runtime PM support for PCIe ports (Mika Westerberg)
   - Remove redundant check of pcie_set_clkpm (Shawn Lin)

  Virtualization:
   - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
   - Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
   - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
   - Add ACS quirk for Solarflare SFC9220 (Edward Cree)

  MSI:
   - Fix PCI_MSI dependencies (Arnd Bergmann)
   - Add pci_msix_desc_addr() helper (Christoph Hellwig)
   - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
   - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
   - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
   - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)

  Error Handling:
   - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
   - Remove DPC tristate module option (Keith Busch)
   - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)

  Generic host bridge driver:
   - Select IRQ_DOMAIN (Arnd Bergmann)
   - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)

  ACPI host bridge driver:
   - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
   - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
   - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
   - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)

  Altera host bridge driver:
   - Check link status before retrain link (Ley Foon Tan)
   - Poll for link up status after retraining the link (Ley Foon Tan)

  Axis ARTPEC-6 host bridge driver:
   - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
   - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
   - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)

  Intel VMD host bridge driver:
   - Use lock save/restore in interrupt enable path (Jon Derrick)
   - Select device dma ops to override (Keith Busch)
   - Initialize list item in IRQ disable (Keith Busch)
   - Use x86_vector_domain as parent domain (Keith Busch)
   - Separate MSI and MSI-X vector sharing (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
   - Add Aardvark PCI host controller driver (Thomas Petazzoni)
   - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)

  Microsoft Hyper-V host bridge driver:
   - Fix interrupt cleanup path (Cathy Avery)
   - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
   - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)

  NVIDIA Tegra host bridge driver:
   - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
   - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
   - Use lower-case hex consistently for register definitions (Thierry Reding)
   - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
   - Stop setting pcibios_min_mem (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Drop gen2 dummy I/O port region (Bjorn Helgaas)

  TI DRA7xx host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Xilinx AXI host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Miscellaneous:
   - Make bus_attr_resource_alignment static (Ben Dooks)
   - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
   - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
   - Make host bridge drivers explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
  PCI: xgene: Make explicitly non-modular
  PCI: thunder-pem: Make explicitly non-modular
  PCI: thunder-ecam: Make explicitly non-modular
  PCI: tegra: Make explicitly non-modular
  PCI: rcar-gen2: Make explicitly non-modular
  PCI: rcar: Make explicitly non-modular
  PCI: mvebu: Make explicitly non-modular
  PCI: layerscape: Make explicitly non-modular
  PCI: keystone: Make explicitly non-modular
  PCI: hisi: Make explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: designware-plat: Make it explicitly non-modular
  PCI: artpec6: Make explicitly non-modular
  PCI: armada8k: Make explicitly non-modular
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: Add ACS quirk for Solarflare SFC9220
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller
  PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
  ...

Check for the existence of piocb->vport before accessing it.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The lpfc_sli4_scmd_to_wqidx_distr() function expects the scsi_cmnd
'lpfc_cmd->pCmd' not to be null, and point to the midlayer command.

That's not true in the .eh_(device|target|bus)_reset_handler path,
because lpfc_send_taskmgmt() sends commands not from the midlayer, so
does not set 'lpfc_cmd->pCmd'.

That is true in the .queuecommand path because lpfc_queuecommand()
stores the scsi_cmnd from midlayer in lpfc_cmd->pCmd; and lpfc_cmd is
stored by lpfc_scsi_prep_cmnd() in piocbq->context1 -- which is passed
to lpfc_sli4_scmd_to_wqidx_distr() as lpfc_cmd parameter.

This problem can be hit on SCSI EH, and immediately with sg_reset.
These 2 test-cases demonstrate the problem/fix with next-20160601.

Test-case 1) sg_reset

    # strace sg_reset --device /dev/sdm
    <...>
    open("/dev/sdm", O_RDWR|O_NONBLOCK)     = 3
    ioctl(3, SG_SCSI_RESET, 0x3fffde6d0994 <unfinished ...>
    +++ killed by SIGSEGV +++
    Segmentation fault

    # dmesg
    Unable to handle kernel paging request for data at address 0x00000000
    Faulting instruction address: 0xd00000001c88442c
    Oops: Kernel access of bad area, sig: 11 [#1]
    <...>
    CPU: 104 PID: 16333 Comm: sg_reset Tainted: G        W       4.7.0-rc1-next-20160601-00004-g95b89dc #6
    <...>
    NIP [d00000001c88442c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc]
    LR [d00000001c826fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc]
    Call Trace:
    [c000003c9ec876f0] [c000003c9ec87770] 0xc000003c9ec87770 (unreliable)
    [c000003c9ec87720] [d00000001c82e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc]
    [c000003c9ec87780] [d00000001c831a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc]
    [c000003c9ec87880] [d00000001c87f27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc]
    [c000003c9ec87950] [d00000001c87fd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc]
    [c000003c9ec87a10] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0
    [c000003c9ec87a40] [c0000000006113e8] scsi_ioctl_reset+0x198/0x2c0
    [c000003c9ec87bf0] [c00000000060fe5c] scsi_ioctl+0x13c/0x4b0
    [c000003c9ec87c80] [c0000000006629b0] sd_ioctl+0xf0/0x120
    [c000003c9ec87cd0] [c00000000046e4f8] blkdev_ioctl+0x248/0xb70
    [c000003c9ec87d30] [c0000000002a1f60] block_ioctl+0x70/0x90
    [c000003c9ec87d50] [c00000000026d334] do_vfs_ioctl+0xc4/0x890
    [c000003c9ec87de0] [c00000000026db60] SyS_ioctl+0x60/0xc0
    [c000003c9ec87e30] [c000000000009120] system_call+0x38/0x108
    Instruction dump:
    <...>

    With fix:

    # strace sg_reset --device /dev/sdm
    <...>
    open("/dev/sdm", O_RDWR|O_NONBLOCK)     = 3
    ioctl(3, SG_SCSI_RESET, 0x3fffe103c554) = 0
    close(3)                                = 0
    exit_group(0)                           = ?
    +++ exited with 0 +++

    # dmesg
    [  424.658649] lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (1, 0) return x2002

Test-case 2) SCSI EH

    Using this debug patch to wire an SCSI EH trigger, for lpfc_scsi_cmd_iocb_cmpl():
    -       cmd->scsi_done(cmd);
    +       if ((phba->pport ? phba->pport->cfg_log_verbose : phba->cfg_log_verbose) == 0x32100000)
    +               printk(KERN_ALERT "lpfc: skip scsi_done()\n");
    +       else
    +               cmd->scsi_done(cmd);

    # echo 0x32100000 > /sys/class/scsi_host/host11/lpfc_log_verbose

    # dd if=/dev/sdm of=/dev/null iflag=direct &
    <...>

    After a while:

    # dmesg
    lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000)
    lpfc: skip scsi_done()
    <...>
    Unable to handle kernel paging request for data at address 0x00000000
    Faulting instruction address: 0xd0000000199e448c
    Oops: Kernel access of bad area, sig: 11 [#1]
    <...>
    CPU: 96 PID: 28556 Comm: scsi_eh_11 Tainted: G        W       4.7.0-rc1-next-20160601-00004-g95b89dc #6
    <...>
    NIP [d0000000199e448c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc]
    LR [d000000019986fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc]
    Call Trace:
    [c000000ff0d0b890] [c000000ff0d0b900] 0xc000000ff0d0b900 (unreliable)
    [c000000ff0d0b8c0] [d00000001998e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc]
    [c000000ff0d0b920] [d000000019991a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc]
    [c000000ff0d0ba20] [d0000000199df27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc]
    [c000000ff0d0baf0] [d0000000199dfd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc]
    [c000000ff0d0bbb0] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0
    [c000000ff0d0bbe0] [c0000000006126cc] scsi_eh_ready_devs+0x49c/0x9c0
    [c000000ff0d0bcb0] [c000000000614160] scsi_error_handler+0x580/0x680
    [c000000ff0d0bd80] [c0000000000ae848] kthread+0x108/0x130
    [c000000ff0d0be30] [c0000000000094a8] ret_from_kernel_thread+0x5c/0xb4
    Instruction dump:
    <...>

    With fix:

    # dmesg
    lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000)
    lpfc: skip scsi_done()
    <...>
    lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (0, 0) return x2002
    <...>
    lpfc 0006:01:00.4: 4:(0):0723 SCSI layer issued Target Reset (1, 0) return x2002
    <...>
    lpfc 0006:01:00.4: 4:(0):0714 SCSI layer issued Bus Reset Data: x2002
    <...>
    lpfc 0006:01:00.4: 4:(0):3172 SCSI layer issued Host Reset Data:
    <...>

Fixes: 8b0dff14164d ("lpfc: Add support for using block multi-queue")
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When building with -Wextra, we get a lot of warnings for the lpfc driver
concerning expressions that are always true, starting with:

drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_enable_npiv_init':
drivers/scsi/lpfc/lpfc_attr.c:2786:77: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_enable_rrq_init':
drivers/scsi/lpfc/lpfc_attr.c:2802:76: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_suppress_link_up_init':
drivers/scsi/lpfc/lpfc_attr.c:2812:2050: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_log_verbose_init':
drivers/scsi/lpfc/lpfc_attr.c:3064:1930: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]

The code works as intended, but it would be nice to shut up the warning
so we don't clutter up build logs with this. Using a separate inline
function for it makes it clear to the compiler that the comparison is
necessary in the caller but still lets it do the constant-folding.

[mkp: fix typo]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Call lpfc_sli_validate_fcp_iocb() with the hbalock held, as the pointer
to iocbq is not guaranteed to still be valid after looking it up.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Update lpfc version to 11.2.0.0

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Copyright updates

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>