linux.git/drivers/scsi/lpfc, branch v3.17

lpfc: Remove superfluous call to pci_disable_msix()

2014-07-29T12:38:53+00:00

There is no need to call pci_disable_msix() in case
the previous call to pci_enable_msix() failed

Signed-off-by: Alexander Gordeev 
Acked-by: James Smart 
Signed-off-by: Christoph Hellwig

scsi: use 64-bit value for 'max_luns'

2014-07-17T20:07:38+00:00

Now that we're using 64-bit LUNs internally we need to increase
the size of max_luns to 64 bits, too.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Ewan Milne 
Signed-off-by: Christoph Hellwig

scsi: use 64-bit LUNs

2014-07-17T20:07:37+00:00

The SCSI standard defines 64-bit values for LUNs, and large arrays
employing large or hierarchical LUN numbers become more and more
common.

So update the linux SCSI stack to use 64-bit LUN numbers.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Ewan Milne 
Signed-off-by: Christoph Hellwig

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2014-06-15T00:49:48+00:00

Pull more SCSI updates from James Bottomley:
 "This is just a couple of drivers (hpsa and lpfc) that got left out for
  further testing in linux-next.  We also have one fix to a prior
  submission (qla2xxx sparse)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits)
  qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patch
  lpfc: Update lpfc version to driver version 10.2.8001.0
  lpfc: Fix ExpressLane priority setup
  lpfc: mark old devices as obsolete
  lpfc: Fix for initializing RRQ bitmap
  lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries
  lpfc: Update lpfc version to driver version 10.2.8000.0
  lpfc: Update Copyright on changed files from 8.3.45 patches
  lpfc: Update Copyright on changed files
  lpfc: Fixed locking for scsi task management commands
  lpfc: Convert runtime references to old xlane cfg param to fof cfg param
  lpfc: Fix FW dump using sysfs
  lpfc: Fix SLI4 s abort loop to process all FCP rings and under ring_lock
  lpfc: Fixed kernel panic in lpfc_abort_handler
  lpfc: Fix locking for postbufq when freeing
  lpfc: Fix locking for lpfc_hba_down_post
  lpfc: Fix dynamic transitions of FirstBurst from on to off
  hpsa: fix handling of hpsa_volume_offline return value
  hpsa: return -ENOMEM not -1 on kzalloc failure in hpsa_get_device_id
  hpsa: remove messages about volume status VPD inquiry page not supported
  ...

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2014-06-10T01:54:06+00:00

Pull SCSI updates from James Bottomley:
 "This patch consists of the usual driver updates (qla2xxx, qla4xxx,
  lpfc, be2iscsi, fnic, ufs, NCR5380) The NCR5380 is the addition to
  maintained status of a long neglected driver for older hardware.  In
  addition there are a lot of minor fixes and cleanups and some more
  updates to make scsi mq ready"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (130 commits)
  include/scsi/osd_protocol.h: remove unnecessary __constant
  mvsas: Recognise device/subsystem 9485/9485 as 88SE9485
  Revert "be2iscsi: Fix processing cqe for cxn whose endpoint is freed"
  mptfusion: fix msgContext in mptctl_hp_hostinfo
  acornscsi: remove linked command support
  scsi/NCR5380: dprintk macro
  fusion: Remove use of DEF_SCSI_QCMD
  fusion: Add free msg frames to the head, not tail of list
  mpt2sas: Add free smids to the head, not tail of list
  mpt2sas: Remove use of DEF_SCSI_QCMD
  mpt2sas: Remove uses of serial_number
  mpt3sas: Remove use of DEF_SCSI_QCMD
  mpt3sas: Remove uses of serial_number
  qla2xxx: Use kmemdup instead of kmalloc + memcpy
  qla4xxx: Use kmemdup instead of kmalloc + memcpy
  qla2xxx: fix incorrect debug printk
  be2iscsi: Bump the driver version
  be2iscsi: Fix processing cqe for cxn whose endpoint is freed
  be2iscsi: Fix destroy MCC-CQ before MCC-EQ is destroyed
  be2iscsi: Fix memory corruption in MBX path
  ...

lpfc: Update lpfc version to driver version 10.2.8001.0

2014-06-02T16:30:19+00:00

Update lpfc version to driver version 10.2.8001.0

Signed-off-by: James Smart 
Reviewed-By: Dick Kennedy 
Signed-off-by: Christoph Hellwig

lpfc: Fix ExpressLane priority setup

2014-06-02T16:30:18+00:00

Fix ExpressLane priority setup

Signed-off-by: James Smart 
Reviewed-By: Dick Kennedy 
Signed-off-by: Christoph Hellwig

lpfc: mark old devices as obsolete

2014-06-02T16:30:10+00:00

Signed-off-by: James Smart 
Reviewed-By: Dick Kennedy 
Signed-off-by: Christoph Hellwig

lpfc: Fix for initializing RRQ bitmap

2014-06-02T16:29:52+00:00

Fix for initializing RRQ bitmap

Signed-off-by: James Smart 
Reviewed-By: Dick Kennedy 
Signed-off-by: Christoph Hellwig

lpfc: Fix for cleaning up stale ring flag and sp_queue_event entries

2014-06-02T16:29:49+00:00

Fix for cleaning up stale ring flag and sp_queue_event entries.

Signed-off-by: James Smart 
Reviewed-By: Dick Kennedy 
Signed-off-by: Christoph Hellwig