linux.git/drivers/scsi/libsas, branch v5.12 Linux kernel source tree scsi: libsas: Reset num_scatter if libata marks qc as NODATA 2021-04-08T01:48:38+00:00 Jolly Shah jollys@google.com 2021-03-18T22:56:32+00:00 176ddd89171ddcf661862d90c5d257877f7326d6 When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by: Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jolly Shah <jollys@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
When the cache_type for the SCSI device is changed, the SCSI layer issues a
MODE_SELECT command. The caching mode details are communicated via a
request buffer associated with the SCSI command with data direction set as
DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata
layer, as a part of generic initial setup, libata layer sets up the
scatterlist for the command using the SCSI command (ata_scsi_qc_new()).
This command is then translated by the libata layer into
ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats
this as a non-data command (ata_mselect_caching()), since it only needs an
ATA taskfile to pass the caching on/off information to the device. It does
not need the scatterlist that has been setup, so it does not perform
dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this
command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it
as a non-data command with a scatterlist. It cannot extract the correct DMA
length since the scatterlist has not been mapped with dma_map_sg() for a
DMA operation. When this partially constructed SAS task reaches pm80xx
LLDD, it results in the following warning:

"pm80xx_chip_sata_req 6058: The sg list address
start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff
end_addr_low=0xffffffff has crossed 4G boundary"

Update libsas to handle ATA non-data commands separately so num_scatter and
total_xfer_len remain 0.

Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com
Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA")
Tested-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jolly Shah <jollys@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: libsas: Remove temporarily-added _gfp() API variants 2021-01-23T02:31:10+00:00 Ahmed S. Darwish a.darwish@linutronix.de 2021-01-18T10:09:55+00:00 65f7cfba6196baf2fc06ac0ab0be764377f3206a These variants were added for bisectability. Remove them, as all call sites have now been convertd to use the original API. Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
These variants were added for bisectability. Remove them, as all call sites
have now been convertd to use the original API.

Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: libsas: Switch back to original event notifiers API 2021-01-23T02:31:09+00:00 Ahmed S. Darwish a.darwish@linutronix.de 2021-01-18T10:09:52+00:00 f76d9f1a1511eeb8a10c8f88c3c73ec2e0cba992 libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original event notifiers API, while still passing GFP context. The _gfp() notifier variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original event notifiers API, while still passing GFP
context.  The _gfp() notifier variants will be removed afterwards.

Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: libsas: Add gfp_t flags parameter to event notifications 2021-01-23T02:31:09+00:00 Ahmed S. Darwish a.darwish@linutronix.de 2021-01-18T10:09:48+00:00 5d6a75a1edf63ff243d937253ced62d8edea30b5 All call-sites of below libsas APIs: - sas_alloc_event() - sas_notify_port_event() - sas_notify_phy_event() have been converted to use the _gfp()-suffixed version. Modify the original APIs above to take a gfp_t flags parameter by default. For bisectability, call-sites will be modified again to use the original libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions can then be removed. Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
All call-sites of below libsas APIs:

  - sas_alloc_event()
  - sas_notify_port_event()
  - sas_notify_phy_event()

have been converted to use the _gfp()-suffixed version.  Modify the
original APIs above to take a gfp_t flags parameter by default.

For bisectability, call-sites will be modified again to use the original
libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions
can then be removed.

Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: libsas: Pass gfp_t flags to event notifiers 2021-01-23T02:31:08+00:00 Ahmed S. Darwish a.darwish@linutronix.de 2021-01-18T10:09:44+00:00 19a39831ff99f88ea8d01a2b6716084f14752529 Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Context analysis: - sas_enable_revalidation(): process, acquires mutex - sas_resume_ha(): process, calls wait_event_timeout() Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

Context analysis:

  - sas_enable_revalidation(): process, acquires mutex
  - sas_resume_ha(): process, calls wait_event_timeout()

Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: libsas: Introduce a _gfp() variant of event notifiers 2021-01-23T02:31:07+00:00 Ahmed S. Darwish a.darwish@linutronix.de 2021-01-18T10:09:39+00:00 c2d0f1a65ab9fbabebb463bf36f50ea8f4633386 sas_alloc_event() uses in_interrupt() to decide which allocation should be used. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The in_interrupt() check is also only partially correct, because it fails to choose the correct code path when just preemption or interrupts are disabled. For example, as in the following call chain: mvsas/mv_sas.c: mvs_work_queue() [process context] spin_lock_irqsave(mvs_info::lock, ) -> libsas/sas_event.c: sas_notify_phy_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation -> libsas/sas_event.c: sas_notify_port_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation Introduce sas_alloc_event_gfp(), sas_notify_port_event_gfp(), and sas_notify_phy_event_gfp(), which all behave like the non _gfp() variants but use a caller-passed GFP mask for allocations. For bisectability, all callers will be modified first to pass GFP context, then the non _gfp() libsas API variants will be modified to take a gfp_t by default. Link: https://lore.kernel.org/r/20210118100955.1761652-4-a.darwish@linutronix.de Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
sas_alloc_event() uses in_interrupt() to decide which allocation should be
used.

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

The in_interrupt() check is also only partially correct, because it fails
to choose the correct code path when just preemption or interrupts are
disabled. For example, as in the following call chain:

  mvsas/mv_sas.c: mvs_work_queue() [process context]
  spin_lock_irqsave(mvs_info::lock, )
    -> libsas/sas_event.c: sas_notify_phy_event()
      -> sas_alloc_event()
        -> in_interrupt() = false
          -> invalid GFP_KERNEL allocation
    -> libsas/sas_event.c: sas_notify_port_event()
      -> sas_alloc_event()
        -> in_interrupt() = false
          -> invalid GFP_KERNEL allocation

Introduce sas_alloc_event_gfp(), sas_notify_port_event_gfp(), and
sas_notify_phy_event_gfp(), which all behave like the non _gfp() variants
but use a caller-passed GFP mask for allocations.

For bisectability, all callers will be modified first to pass GFP context,
then the non _gfp() libsas API variants will be modified to take a gfp_t by
default.

Link: https://lore.kernel.org/r/20210118100955.1761652-4-a.darwish@linutronix.de
Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: libsas: Remove notifier indirection 2021-01-23T02:31:07+00:00 John Garry john.garry@huawei.com 2021-01-18T10:09:38+00:00 121181f3f839c29d8dd9fdc3cc9babbdc74227f8 LLDDs report events to libsas with .notify_port_event and .notify_phy_event callbacks. These callbacks are fixed and so there is no reason why the functions cannot be called directly, so do that. This neatens the code slightly, makes it more obvious, and reduces function pointer usage, which is generally a good thing. Downside is that there are 2x more symbol exports. [a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables] Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
LLDDs report events to libsas with .notify_port_event and .notify_phy_event
callbacks.

These callbacks are fixed and so there is no reason why the functions
cannot be called directly, so do that.

This neatens the code slightly, makes it more obvious, and reduces function
pointer usage, which is generally a good thing. Downside is that there are
2x more symbol exports.

[a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables]

Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2020-10-14T22:15:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-14T22:15:35+00:00 55e0500eb5c0440a3d43074edbd8db3e95851b66 Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ... 
Pull SCSI updates from James Bottomley:
 "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi,
  hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes.

  There are only three core changes: adding sense codes, cleaning up
  noretry and adding an option for limitless retries"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits)
  scsi: hisi_sas: Recover PHY state according to the status before reset
  scsi: hisi_sas: Filter out new PHY up events during suspend
  scsi: hisi_sas: Add device link between SCSI devices and hisi_hba
  scsi: hisi_sas: Add check for methods _PS0 and _PR0
  scsi: hisi_sas: Add controller runtime PM support for v3 hw
  scsi: hisi_sas: Switch to new framework to support suspend and resume
  scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq()
  scsi: qedf: Remove redundant assignment to variable 'rc'
  scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store()
  scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro
  scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed
  scsi: sun_esp: Use module_platform_driver to simplify the code
  scsi: sun3x_esp: Use module_platform_driver to simplify the code
  scsi: sni_53c710: Use module_platform_driver to simplify the code
  scsi: qlogicpti: Use module_platform_driver to simplify the code
  scsi: mac_esp: Use module_platform_driver to simplify the code
  scsi: jazz_esp: Use module_platform_driver to simplify the code
  scsi: mvumi: Fix error return in mvumi_io_attach()
  scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req()
  scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs()
  ...
scsi: libsas: Simplify the return expression of sas_discover_* functions 2020-09-23T00:26:08+00:00 Liu Shixin liushixin2@huawei.com 2020-09-21T13:45:58+00:00 3d1a99e2b5400fd32ec647b290340b5ed091d3ae Simplify the return expression. Link: https://lore.kernel.org/r/20200921134558.3478922-1-liushixin2@huawei.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Simplify the return expression.

Link: https://lore.kernel.org/r/20200921134558.3478922-1-liushixin2@huawei.com
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2020-09-15T23:30:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-09-15T23:30:20+00:00 9803ab172228d8509c72b34c703b9fe67cb94ddc Pull SCSI fix from James Bottomley: "Just one fix in libsas for a resource leak in an error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Fix error path in sas_notify_lldd_dev_found() 
Pull SCSI fix from James Bottomley:
 "Just one fix in libsas for a resource leak in an error path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: Fix error path in sas_notify_lldd_dev_found()