linux.git/drivers/scsi/libiscsi.c, branch v3.17

[SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu

2014-09-19T12:22:59+00:00

This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu.
This function is used by iscsi drivers and userspace to send iscsi PDUs/
commands. For login commands, we have a set buffer size. For all other
commands we do not support data buffers.

This was reported by Dan Carpenter here:
http://www.spinics.net/lists/linux-scsi/msg66838.html

Reported-by: Dan Carpenter 
Signed-off-by: Mike Christie 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Christoph Hellwig 
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley

libiscsi: return new error code when nop times out

2014-08-01T12:16:39+00:00

When a iscsi nop as ping timedout we were failing with the
common connection error code, ISCSI_ERR_CONN_FAILED. This
patch adds a new error code for this problem so can properly
track/distinguish in userspace.

Signed-off-by: Mike Christie 
Acked-by: Vikas Chaudhary 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Christoph Hellwig

scsi: convert host_busy to atomic_t

2014-07-25T11:43:43+00:00

Avoid taking the host-wide host_lock to check the per-host queue limit.
Instead we do an atomic_inc_return early on to grab our slot in the queue,
and if necessary decrement it after finishing all checks.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Hannes Reinecke 
Reviewed-by: Webb Scales 
Acked-by: Jens Axboe 
Tested-by: Bart Van Assche 
Tested-by: Robert Elliott

scsi: use 64-bit LUNs

2014-07-17T20:07:37+00:00

The SCSI standard defines 64-bit values for LUNs, and large arrays
employing large or hierarchical LUN numbers become more and more
common.

So update the linux SCSI stack to use 64-bit LUN numbers.

Signed-off-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Ewan Milne 
Signed-off-by: Christoph Hellwig

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-06-13T05:38:32+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Add support for T10 PI pass-through between vhost-scsi +
     virtio-scsi (MST + Paolo + MKP + nab)
   - Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch +
     nab, merged through scsi.git)
   - Add support for percpu-ida pre-allocation in qla2xxx target code
     (Quinn + nab)
   - A number of iser-target fixes related to hardening the network
     portal shutdown path (Sagi + Slava)
   - Fix response length residual handling for a number of control CDBs
     (Roland + Christophe V.)
   - Various iscsi RFC conformance fixes in the CHAP authentication path
     (Tejas and Calsoft folks + nab)
   - Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response
     failures (Vasu + Jun + nab)
   - Fix long-standing ABORT_TASK + session reset hang (nab)
   - Convert iser-initiator + iser-target to include T10 bytes into EDTL
     (Sagi + Or + MKP + Mike Christie)
   - Fix NULL pointer dereference regression related to XCOPY introduced
     in v3.15 + CC'ed to v3.12.y (nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits)
  target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd
  vhost-scsi: Include prot_bytes into expected data transfer length
  TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire
  libiscsi, iser: Adjust data_length to include protection information
  scsi_cmnd: Introduce scsi_transfer_length helper
  target: Report correct response length for some commands
  target/sbc: Check that the LBA and number of blocks are correct in VERIFY
  target/sbc: Remove sbc_check_valid_sectors()
  Target/iscsi: Fix sendtargets response pdu for iser transport
  Target/iser: Fix a wrong dereference in case discovery session is over iser
  iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak
  target: Use complete_all for se_cmd->t_transport_stop_comp
  target: Set CMD_T_ACTIVE bit for Task Management Requests
  target: cleanup some boolean tests
  target/spc: Simplify INQUIRY EVPD=0x80
  tcm_fc: Generate TASK_SET_FULL status for response failures
  tcm_fc: Generate TASK_SET_FULL status for DataIN failures
  iscsi-target: Reject mutual authentication with reflected CHAP_C
  iscsi-target: Remove no-op from iscsit_tpg_del_portal_group
  iscsi-target: Fix CHAP_A parameter list handling
  ...

libiscsi, iser: Adjust data_length to include protection information

2014-06-11T20:06:45+00:00

In case protection information exists over the wire
iscsi header data length is required to include it.
Use protection information aware scsi helpers to set
the correct transfer length.

In order to avoid breakage, remove iser transfer length
checks for each task as they are not always true and
somewhat redundant anyway.

Signed-off-by: Sagi Grimberg 
Reviewed-by: Mike Christie 
Acked-by: Mike Christie 
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Nicholas Bellinger

scsi/libiscsi: Fix static checker warning on bh locking

2014-05-19T11:33:00+00:00

Commit 659743b "[SCSI] libiscsi: Reduce locking contention in fast path" introduced a
new smatch warning on libiscsi.c "iscsi_xmit_task() warn: inconsistent returns
bottom_half:: locked (1410 [(-61)]) unlocked (1425 [0], 1425 [s32min-(-1),1-s32max])",
which we can eliminate by using non bh locking on the nested spin_lock call.

Reported-by: Dan Carpenter 
Signed-off-by: Shlomo Pongratz 
Signed-off-by: Or Gerlitz 
Reviewed-by: Mike Christie 
Signed-off-by: Christoph Hellwig

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2014-04-03T23:57:19+00:00

Pull infiniband updates from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.15:

   - The biggest change is core API extensions and mlx5 low-level driver
     support for handling DIF/DIX-style protection information, and the
     addition of PI support to the iSER initiator.  Target support will
     be arriving shortly through the SCSI target tree.

   - A nice simplification to the "umem" memory pinning library now that
     we have chained sg lists.  Kudos to Yishai Hadas for realizing our
     code didn't have to be so crazy.

   - Another nice simplification to the sg wrappers used by qib, ipath
     and ehca to handle their mapping of memory to adapter.

   - The usual batch of fixes to bugs found by static checkers etc.
     from intrepid people like Dan Carpenter and Yann Droneaud.

   - A large batch of cxgb4, ocrdma, qib driver updates"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits)
  RDMA/ocrdma: Unregister inet notifier when unloading ocrdma
  RDMA/ocrdma: Fix warnings about pointer <-> integer casts
  RDMA/ocrdma: Code clean-up
  RDMA/ocrdma: Display FW version
  RDMA/ocrdma: Query controller information
  RDMA/ocrdma: Support non-embedded mailbox commands
  RDMA/ocrdma: Handle CQ overrun error
  RDMA/ocrdma: Display proper value for max_mw
  RDMA/ocrdma: Use non-zero tag in SRQ posting
  RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr()
  RDMA/ocrdma: Increment abi version count
  RDMA/ocrdma: Update version string
  be2net: Add abi version between be2net and ocrdma
  RDMA/ocrdma: ABI versioning between ocrdma and be2net
  RDMA/ocrdma: Allow DPP QP creation
  RDMA/ocrdma: Read ASIC_ID register to select asic_gen
  RDMA/ocrdma: SQ and RQ doorbell offset clean up
  RDMA/ocrdma: EQ full catastrophe avoidance
  RDMA/cxgb4: Disable DSGL use by default
  RDMA/cxgb4: rx_data() needs to hold the ep mutex
  ...

SCSI/libiscsi: Add check_protection callback for transports

2014-03-18T05:33:58+00:00

iSCSI needs to be at least aware that a task involves protection
information.  In case it does, after the transaction completed libiscsi
will ask the transport to check the protection status of the
transaction.

Unlike transport errors, DIF errors should not prevent successful
completion of the transaction from the transport point of view, but
should be escelated to scsi mid-layer when constructing the scsi
result and sense data.

check_protection routine will return the ascq corresponding to the DIF
error that occured (or 0 if no error happened).

return ascq:
- 0x1: GUARD_CHECK_FAILED
- 0x2: APPTAG_CHECK_FAILED
- 0x3: REFTAG_CHECK_FAILED

Signed-off-by: Sagi Grimberg 
Signed-off-by: Alex Tabachnik 
Signed-off-by: Roland Dreier

[SCSI] libiscsi: remove unneeded queue work when max_cmdsn is increased

2014-03-15T17:19:18+00:00

iscsi_queuecommand will only take in commands that can fit in the
current window. So, if a command is on the cmdqueue then it can
fit in the current window. If a command is on the mgmtqueue, then
we are setting the immediate bit so they will also fit in the
window. As a result, we never need to to do a iscsi_conn_queue_work
when the maxCmdSn is increased.

What should happen is that a command will complete the window will
be increased, then the scsi layer will send us more commands by
running the scsi_device queues.

Signed-off-by: Mike Christie 
Signed-off-by: James Bottomley