linux.git/drivers/scsi/ipr.c, branch v4.17

scsi: ipr: Use dma_pool_zalloc()

2018-03-13T01:16:58+00:00

Use dma_pool_zalloc() instead of dma_pool_alloc + memset

Signed-off-by: Souptick Joarder 
Acked-by: Brian King 
Signed-off-by: Martin K. Petersen

scsi: ipr: Use sgl_alloc_order() and sgl_free_order()

2018-02-14T02:49:14+00:00

Use the sgl_alloc_order() and sgl_free_order() functions instead of open
coding these functions.

Signed-off-by: Bart Van Assche 
Acked-by: Brian King 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Hannes Reinecke 
Cc: Martin K. Petersen 
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen

scsi: ipr: fix incorrect indentation of assignment statement

2017-12-05T03:56:03+00:00

Remove one extraneous level of indentation on an assignment statement.

Signed-off-by: Colin Ian King 
Acked-by: Brian King 
Signed-off-by: Martin K. Petersen

treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts

2017-11-22T00:35:54+00:00

With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:

    perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
        $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)

    perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
        $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)

The now unused macros are also dropped from include/linux/timer.h.

Signed-off-by: Kees Cook

scsi: ipr: Convert timers to use timer_setup()

2017-11-01T18:27:07+00:00

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Brian King 
Cc: "James E.J. Bottomley" 
Cc: "Martin K. Petersen" 
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Kees Cook 
Reviewed-by: Martin K. Petersen

scsi: ipr: Set no_report_opcodes for RAID arrays

2017-08-23T02:23:36+00:00

Since ipr RAID arrays do not support the MAINTENANCE_IN /
MI_REPORT_SUPPORTED_OPERATION_CODES, set no_report_opcodes to prevent it
from being sent.

Signed-off-by: Brian King 
Signed-off-by: Martin K. Petersen

scsi: ipr: Fix scsi-mq lockdep issue

2017-08-08T15:49:51+00:00

Fixes the following lockdep warning that can occur when scsi-mq is
enabled with ipr due to ipr calling scsi_unblock_requests from irq
context. The fix is to move the call to scsi_unblock_requests to ipr's
existing workqueue.

stack backtrace:
CPU: 28 PID: 0 Comm: swapper/28 Not tainted 4.13.0-rc2-gcc6x-gf74c89b #1
Call Trace:
[c000001fffe97550] [c000000000b50818] dump_stack+0xe8/0x160 (unreliable)
[c000001fffe97590] [c0000000001586d0] print_usage_bug+0x2d0/0x390
[c000001fffe97640] [c000000000158f34] mark_lock+0x7a4/0x8e0
[c000001fffe976f0] [c00000000015a000] __lock_acquire+0x6a0/0x1a70
[c000001fffe97860] [c00000000015befc] lock_acquire+0xec/0x2e0
[c000001fffe97930] [c000000000b71514] _raw_spin_lock+0x44/0x70
[c000001fffe97960] [c0000000005b60f4] blk_mq_sched_dispatch_requests+0xa4/0x2a0
[c000001fffe979c0] [c0000000005acac0] __blk_mq_run_hw_queue+0x100/0x2c0
[c000001fffe97a00] [c0000000005ad478] __blk_mq_delay_run_hw_queue+0x118/0x130
[c000001fffe97a40] [c0000000005ad61c] blk_mq_start_hw_queues+0x6c/0xa0
[c000001fffe97a80] [c000000000797aac] scsi_kick_queue+0x2c/0x60
[c000001fffe97aa0] [c000000000797cf0] scsi_run_queue+0x210/0x360
[c000001fffe97b10] [c00000000079b888] scsi_run_host_queues+0x48/0x80
[c000001fffe97b40] [c0000000007b6090] ipr_ioa_bringdown_done+0x70/0x1e0
[c000001fffe97bc0] [c0000000007bc860] ipr_reset_ioa_job+0x80/0xf0
[c000001fffe97bf0] [c0000000007b4d50] ipr_reset_timer_done+0xd0/0x100
[c000001fffe97c30] [c0000000001937bc] call_timer_fn+0xdc/0x4b0
[c000001fffe97cf0] [c000000000193d08] expire_timers+0x178/0x330
[c000001fffe97d60] [c0000000001940c8] run_timer_softirq+0xb8/0x120
[c000001fffe97de0] [c000000000b726a8] __do_softirq+0x168/0x6d8
[c000001fffe97ef0] [c0000000000df2c8] irq_exit+0x108/0x150
[c000001fffe97f10] [c000000000017bf4] __do_irq+0x2a4/0x4a0
[c000001fffe97f90] [c00000000002da50] call_do_irq+0x14/0x24
[c0000007fad93aa0] [c000000000017e8c] do_IRQ+0x9c/0x140
[c0000007fad93af0] [c000000000008b98] hardware_interrupt_common+0x138/0x140

Reported-by: Michael Ellerman 
Signed-off-by: Brian King 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2017-05-04T19:19:44+00:00

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates
  (hisi_sas, ufs, fnic, cxlflash, be2iscsi, ipr, stex). There's also the
  usual amount of cosmetic and spelling stuff"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (155 commits)
  scsi: qla4xxx: fix spelling mistake: "Tempalate" -> "Template"
  scsi: stex: make S6flag static
  scsi: mac_esp: fix to pass correct device identity to free_irq()
  scsi: aacraid: pci_alloc_consistent() failures on ARM64
  scsi: ufs: make ufshcd_get_lists_status() register operation obvious
  scsi: ufs: use MASK_EE_STATUS
  scsi: mac_esp: Replace bogus memory barrier with spinlock
  scsi: fcoe: make fcoe_e_d_tov and fcoe_r_a_tov static
  scsi: sd_zbc: Do not write lock zones for reset
  scsi: sd_zbc: Remove superfluous assignments
  scsi: sd: sd_zbc: Rename sd_zbc_setup_write_cmnd
  scsi: Improve scsi_get_sense_info_fld
  scsi: sd: Cleanup sd_done sense data handling
  scsi: sd: Improve sd_completed_bytes
  scsi: sd: Fix function descriptions
  scsi: mpt3sas: remove redundant wmb
  scsi: mpt: Move scsi_remove_host() out of mptscsih_remove_host()
  scsi: sg: reset 'res_in_use' after unlinking reserved array
  scsi: mvumi: remove code handling zero scsi_sg_count(scmd) case
  scsi: fusion: fix spelling mistake: "Persistancy" -> "Persistency"
  ...

Merge remote-tracking branch 'mkp-scsi/4.11/scsi-fixes' into fixes

2017-04-12T14:29:17+00:00

scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION

2017-04-12T01:40:19+00:00

On a dual controller setup with multipath enabled, some MEDIUM ERRORs
caused both paths to be failed, thus I/O got queued/blocked since the
'queue_if_no_path' feature is enabled by default on IPR controllers.

This example disabled 'queue_if_no_path' so the I/O failure is seen at
the sg_dd program.  Notice that after the sg_dd test-case, both paths
are in 'failed' state, and both path/priority groups are in 'enabled'
state (not 'active') -- which would block I/O with 'queue_if_no_path'.

    # sg_dd if=/dev/dm-2 bs=4096 count=1 dio=1 verbose=4 blk_sgio=0
    <...>
    read(unix): count=4096, res=-1
    sg_dd: reading, skip=0 : Input/output error
    <...>

    # dmesg
    [...] sd 2:2:16:0: [sds] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [...] sd 2:2:16:0: [sds] Sense Key : Medium Error [current]
    [...] sd 2:2:16:0: [sds] Add. Sense: Unrecovered read error - recommend rewrite the data
    [...] sd 2:2:16:0: [sds] CDB: Read(10) 28 00 00 00 00 00 00 00 20 00
    [...] blk_update_request: I/O error, dev sds, sector 0
    [...] device-mapper: multipath: Failing path 65:32.
    <...>
    [...] device-mapper: multipath: Failing path 65:224.

    # multipath -l
    1IBM_IPR-0_59C2AE0000001F80 dm-2 IBM     ,IPR-0   59C2AE00
    size=5.2T features='0' hwhandler='1 alua' wp=rw
    |-+- policy='service-time 0' prio=0 status=enabled
    | `- 2:2:16:0 sds  65:32  failed undef running
    `-+- policy='service-time 0' prio=0 status=enabled
      `- 1:2:7:0  sdae 65:224 failed undef running

This is not the desired behavior. The dm-multipath explicitly checks
for the MEDIUM ERROR case (and a few others) so not to fail the path
(e.g., I/O to other sectors could potentially happen without problems).
See dm-mpath.c :: do_end_io_bio() -> noretry_error() !->! fail_path().

The problem trace is:

1) ipr_scsi_done()  // SENSE KEY/CHECK CONDITION detected, go to..
2) ipr_erp_start()  // ipr_is_gscsi() and masked_ioasc OK, go to..
3) ipr_gen_sense()  // masked_ioasc is IPR_IOASC_MED_DO_NOT_REALLOC,
                    // so set DID_PASSTHROUGH.

4) scsi_decide_disposition()  // check for DID_PASSTHROUGH and return
                              // early on, faking a DID_OK.. *instead*
                              // of reaching scsi_check_sense().

                              // Had it reached the latter, that would
                              // set host_byte to DID_MEDIUM_ERROR.

5) scsi_finish_command()
6) scsi_io_completion()
7) __scsi_error_from_host_byte()  // That would be converted to -ENODATA
<...>
8) dm_softirq_done()
9) multipath_end_io()
10) do_end_io()
11) noretry_error()  // And that is checked in dm-mpath :: noretry_error()
                     // which would cause fail_path() not to be called.

With this patch applied, the I/O is failed but the paths are not.  This
multipath device continues accepting more I/O requests without blocking.
(and notice the different host byte/driver byte handling per SCSI layer).

    # dmesg
    [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK
    [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 40 00
    [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current]
    [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data
    [...] blk_update_request: critical medium error, dev sdaf, sector 0
    [...] blk_update_request: critical medium error, dev dm-6, sector 0
    [...] sd 2:2:7:0: [sdaf] Done: SUCCESS Result: hostbyte=0x13 driverbyte=DRIVER_OK
    [...] sd 2:2:7:0: [sdaf] CDB: Read(10) 28 00 00 00 00 00 00 00 10 00
    [...] sd 2:2:7:0: [sdaf] Sense Key : Medium Error [current]
    [...] sd 2:2:7:0: [sdaf] Add. Sense: Unrecovered read error - recommend rewrite the data
    [...] blk_update_request: critical medium error, dev sdaf, sector 0
    [...] blk_update_request: critical medium error, dev dm-6, sector 0
    [...] Buffer I/O error on dev dm-6, logical block 0, async page read

    # multipath -l 1IBM_IPR-0_59C2AE0000001F80
    1IBM_IPR-0_59C2AE0000001F80 dm-6 IBM     ,IPR-0   59C2AE00
    size=5.2T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
    |-+- policy='service-time 0' prio=0 status=active
    | `- 2:2:7:0  sdaf 65:240 active undef running
    `-+- policy='service-time 0' prio=0 status=enabled
      `- 1:2:7:0  sdh  8:112  active undef running

Signed-off-by: Mauricio Faria de Oliveira 
Acked-by: Brian King 
Signed-off-by: Martin K. Petersen