linux.git/drivers/scsi/ipr.c, branch v3.14

[SCSI] ipr: Increase msi-x interrupt vectors to 16

2013-12-19T15:39:04+00:00

Signed-off-by: Wen Xiong 
Acked-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers

2013-11-29T04:48:39+00:00

Some host adapters do not pass commands through to the target disk
directly. Instead they provide an emulated target which may or may not
accurately report its capabilities. In some cases the physical device
characteristics are reported even when the host adapter is processing
commands on the device's behalf. This can lead to adapter firmware hangs
or excessive I/O errors.

This patch disables WRITE SAME for devices connected to host adapters
that provide an emulated target. Driver writers can disable WRITE SAME
by setting the no_write_same flag in the host adapter template.

[jejb: fix up rejections due to eh_deadline patch]
Signed-off-by: Martin K. Petersen 
Cc: stable@kernel.org
Signed-off-by: James Bottomley

[SCSI] ipr: Add sereral new CCIN definitions for new adapters support

2013-08-26T08:51:32+00:00

Add the appropriate definitions and table entries for new adapter support.

Signed-off-by: Wen Xiong 
Signed-off-by: James Bottomley

[SCSI] ipr: IOA Status Code(IOASC) update

2013-06-27T00:59:05+00:00

Signed-off-by: Wen Xiong 
Acked-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: qc_fill_rtf() method should not store alternate status register

2013-06-26T18:11:30+00:00

The 'ctl' field of  the 'struct ata_taskfile' is not really dual purpose, i.e.
it is not intended  for storing the alternate status register (which is mapped
at the same address in the legacy IDE controllers) in the qc_fill_rtf() method.
No other 'libata' driver except 'drivers/scsi/ipr.c' stores the alternate status
register's value in the 'ctl' field of 'qc->result_tf', hence this driver should
not do this as well...

Signed-off-by: Sergei Shtylyov 
Acked-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: possible irq lock inversion dependency detected

2013-06-26T17:48:38+00:00

When enable lockdep, seeing "possible irq lock inversion dependency detected"
error. This patch fixes the issue.

Signed-off-by: Wen Xiong 
Acked-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Avoid target_destroy accessing memory after it was freed

2013-06-04T18:16:22+00:00

Defined target_ids,array_ids and vsets_ids as unsigned long to avoid
target_destroy accessing memory after it was freed.

Signed-off-by: Wen Xiong 
Signed-off-by: James Bottomley

[SCSI] ipr: SATA DVD probing failed with 64bit adapter

2013-05-02T22:35:15+00:00

Driver passed the wrong IOADL address to IOA adapter. The patch
fixes the issue.

Signed-off-by: Wen Xiong 
Acked-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: Need to reset adapter after the 6th EEH error

2013-05-02T19:30:01+00:00

Add reset adapter after the 6th EEH errors in ipr driver. This triggers
the adapter reset via the PCI config space even when the slot is frozen.

Signed-off-by: Wen Xiong 
Acked-by: Brian King 
Signed-off-by: James Bottomley

[SCSI] ipr: dlpar failed when adding an adapter back

2013-04-06T10:25:37+00:00

Reinitialize resource queue prior to freeing resource entries to ensure they
are not referenced. This fixes an issue with target_destoy accessing memory
after it was freed.

Signed-off-by: Wen Xiong 
Acked-by: Brian King 
Signed-off-by: James Bottomley