linux.git/drivers/scsi/ipr.c, branch for-next Linux kernel source tree Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 2024-05-21T17:09:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-05-21T17:09:28+00:00 f0bae243b2bcf2b160ae547463bf542762beef8f Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ... 
Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is >2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY 2024-05-16T19:35:08+00:00 Damien Le Moal dlemoal@kernel.org 2024-03-25T07:09:34+00:00 67908f6015b678579078bf82ba5648ee43481086 Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-24-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> 
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.

Link: https://lore.kernel.org/r/20240325070944.3600338-24-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ipr: Switch to using ->device_configure 2024-04-12T01:37:49+00:00 Christoph Hellwig hch@lst.de 2024-04-09T14:37:40+00:00 c8bc8392b2bcde75da3cf1161d720a6ff8e86cb5 Switch to the ->device_configure method instead of ->slave_configure and update the block limits on the passed in queue_limits instead of using the per-limit accessors. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240409143748.980206-16-hch@lst.de Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-16-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ipr: Remove obsolete check for old CPUs 2023-12-06T02:05:09+00:00 Michael Ellerman mpe@ellerman.id.au 2023-11-27T11:17:40+00:00 84e46978b91f387d5d153f7f76ddc87471f4a52c The IPR driver has a routine to check whether it's running on certain CPU versions and if so whether the adapter is supported on that CPU. But none of the CPUs it checks for are supported by Linux anymore. The most recent CPU it checks for is Power4+ which was removed in commit 471d7ff8b51b ("powerpc/64s: Remove POWER4 support"). So drop the check. That makes the "testmode" module parameter unused, so remove it as well. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20231127111740.1288463-1-mpe@ellerman.id.au Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
The IPR driver has a routine to check whether it's running on certain CPU
versions and if so whether the adapter is supported on that CPU.

But none of the CPUs it checks for are supported by Linux anymore.

The most recent CPU it checks for is Power4+ which was removed in commit
471d7ff8b51b ("powerpc/64s: Remove POWER4 support").

So drop the check. That makes the "testmode" module parameter unused, so
remove it as well.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20231127111740.1288463-1-mpe@ellerman.id.au
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ipr: Do PCI error checks on own line 2023-10-10T21:40:19+00:00 Ilpo Järvinen ilpo.jarvinen@linux.intel.com 2023-09-11T12:53:54+00:00 875760900b44fb33753dc1c53d0c03acb3336447 Instead of "if" conditions with line splits, use the usual error handling pattern with a separate variable to improve readability. No functional changes intended. Link: https://lore.kernel.org/r/20230911125354.25501-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> 
Instead of "if" conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.

No functional changes intended.

Link: https://lore.kernel.org/r/20230911125354.25501-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
scsi: ipr: Remove several unused variables 2023-04-25T03:11:47+00:00 Tom Rix trix@redhat.com 2023-04-20T12:50:35+00:00 392e4daa8a7e3d9b103c64acef08f62f19d421aa gcc with W=1 reports drivers/scsi/ipr.c: In function ‘ipr_init_res_entry’: drivers/scsi/ipr.c:1104:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1104 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_update_res_entry’: drivers/scsi/ipr.c:1261:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1261 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_change_queue_depth’: drivers/scsi/ipr.c:4417:36: error: variable ‘res’ set but not used [-Werror=unused-but-set-variable] 4417 | struct ipr_resource_entry *res; | ^~~ These variables are not used, so remove them. The lock around res is not needed so remove that. This makes ioa_cfg and lock_flags unneeded so remove them as well. Fixes: 65a15d6560df ("scsi: ipr: Remove SATA support") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230420125035.3888188-1-trix@redhat.com Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
gcc with W=1 reports
drivers/scsi/ipr.c: In function ‘ipr_init_res_entry’:
drivers/scsi/ipr.c:1104:22: error: variable ‘proto’
  set but not used [-Werror=unused-but-set-variable]
 1104 |         unsigned int proto;
      |                      ^~~~~
drivers/scsi/ipr.c: In function ‘ipr_update_res_entry’:
drivers/scsi/ipr.c:1261:22: error: variable ‘proto’
  set but not used [-Werror=unused-but-set-variable]
 1261 |         unsigned int proto;
      |                      ^~~~~
drivers/scsi/ipr.c: In function ‘ipr_change_queue_depth’:
drivers/scsi/ipr.c:4417:36: error: variable ‘res’
  set but not used [-Werror=unused-but-set-variable]
 4417 |         struct ipr_resource_entry *res;
      |                                    ^~~

These variables are not used, so remove them. The lock around res is not
needed so remove that. This makes ioa_cfg and lock_flags unneeded so remove
them as well.

Fixes: 65a15d6560df ("scsi: ipr: Remove SATA support")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230420125035.3888188-1-trix@redhat.com
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ipr: Remove SATA support 2023-04-19T03:01:23+00:00 Brian King brking@linux.vnet.ibm.com 2023-04-12T17:40:15+00:00 65a15d6560dff065339f6cac91de4beded60fe3f Linux SATA support in ipr has always been limited to SATA DVDs. The last systems that had the option of including a SATA DVD was Power 8, which have been withdrawn for some time now, so this support can be removed. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Linux SATA support in ipr has always been limited to SATA DVDs. The last
systems that had the option of including a SATA DVD was Power 8, which have
been withdrawn for some time now, so this support can be removed.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ipr: Declare SCSI host template const 2023-03-24T23:19:57+00:00 Bart Van Assche bvanassche@acm.org 2023-03-22T19:54:42+00:00 4ea4394e7120f3b7d2ab3409e1e8de5da999dd73 Make it explicit that the SCSI host template is not modified. Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-48-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Make it explicit that the SCSI host template is not modified.

Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230322195515.1267197-48-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2023-03-03T22:41:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-03-03T22:41:50+00:00 06caa751545512fae98c21f282006a7fff852daf Pull more SCSI updates from James Bottomley: "Updates that missed the first pull, mostly because of needing more soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an enclosure services (ses) update (mostly bug fixes) and other minor bug fixes and changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: zfcp: Trace when request remove fails after qdio send fails scsi: zfcp: Change the type of all fsf request id fields and variables to u64 scsi: zfcp: Make the type for accessing request hashtable buckets size_t scsi: ufs: core: Simplify ufshcd_execute_start_stop() scsi: ufs: core: Rely on the block layer for setting RQF_PM scsi: core: Extend struct scsi_exec_args scsi: lpfc: Fix double word in comments scsi: core: Remove the /proc/scsi/${proc_name} directory earlier scsi: core: Fix a source code comment scsi: cxgbi: Remove unneeded version.h include scsi: qedi: Remove unneeded version.h include scsi: mpi3mr: Remove unneeded version.h include scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization scsi: mpi3mr: Use number of bits to manage bitmap sizes scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() scsi: mpi3mr: Fix an issue found by KASAN scsi: mpi3mr: Replace 1-element array with flex-array scsi: ipr: Work around fortify-string warning scsi: ipr: Make ipr_probe_ioa_part2() return void ... 
Pull more SCSI updates from James Bottomley:
 "Updates that missed the first pull, mostly because of needing more
  soak time.

  Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an
  enclosure services (ses) update (mostly bug fixes) and other minor bug
  fixes and changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
  scsi: zfcp: Trace when request remove fails after qdio send fails
  scsi: zfcp: Change the type of all fsf request id fields and variables to u64
  scsi: zfcp: Make the type for accessing request hashtable buckets size_t
  scsi: ufs: core: Simplify ufshcd_execute_start_stop()
  scsi: ufs: core: Rely on the block layer for setting RQF_PM
  scsi: core: Extend struct scsi_exec_args
  scsi: lpfc: Fix double word in comments
  scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
  scsi: core: Fix a source code comment
  scsi: cxgbi: Remove unneeded version.h include
  scsi: qedi: Remove unneeded version.h include
  scsi: mpi3mr: Remove unneeded version.h include
  scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization
  scsi: mpi3mr: Use number of bits to manage bitmap sizes
  scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi
  scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()
  scsi: mpi3mr: Fix an issue found by KASAN
  scsi: mpi3mr: Replace 1-element array with flex-array
  scsi: ipr: Work around fortify-string warning
  scsi: ipr: Make ipr_probe_ioa_part2() return void
  ...
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2023-02-22T21:41:41+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-22T21:41:41+00:00 8762069330316392331e693befd8a5b632833618 Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major core change is a rework to remove the two helpers around scsi_execute_cmd and use it as the only submission interface along with other minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits) scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param() scsi: ufs: core: Fix device management cmd timeout flow scsi: aic94xx: Add missing check for dma_map_single() scsi: smartpqi: Replace one-element array with flexible-array member scsi: mpt3sas: Fix a memory leak scsi: qla2xxx: Remove the unused variable wwn scsi: ufs: core: Fix kernel-doc syntax scsi: ufs: core: Add hibernation callbacks scsi: snic: Fix memory leak with using debugfs_lookup() scsi: ufs: core: Limit DMA alignment check scsi: Documentation: Correct spelling scsi: Documentation: Correct spelling scsi: target: Documentation: Correct spelling scsi: aacraid: Allocate cmd_priv with scsicmd scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5 scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference scsi: ufs: core: Enable DMA clustering scsi: ufs: exynos: Fix the maximum segment size scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 ... 
Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).

  The major core change is a rework to remove the two helpers around
  scsi_execute_cmd and use it as the only submission interface along
  with other minor fixes and updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
  scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
  scsi: ufs: core: Fix device management cmd timeout flow
  scsi: aic94xx: Add missing check for dma_map_single()
  scsi: smartpqi: Replace one-element array with flexible-array member
  scsi: mpt3sas: Fix a memory leak
  scsi: qla2xxx: Remove the unused variable wwn
  scsi: ufs: core: Fix kernel-doc syntax
  scsi: ufs: core: Add hibernation callbacks
  scsi: snic: Fix memory leak with using debugfs_lookup()
  scsi: ufs: core: Limit DMA alignment check
  scsi: Documentation: Correct spelling
  scsi: Documentation: Correct spelling
  scsi: target: Documentation: Correct spelling
  scsi: aacraid: Allocate cmd_priv with scsicmd
  scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
  scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
  scsi: ufs: core: Enable DMA clustering
  scsi: ufs: exynos: Fix the maximum segment size
  scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
  ...