linux.git/drivers/scsi/atari_scsi.h, branch master

atari_scsi: Remove header

2014-11-20T08:11:14+00:00

The #defines in atari_scsi.h are intended to influence subsequent #includes
in atari_scsi.c. IMHO, that's too convoluted.

Remove atari_scsi.h by moving those macro definitions to atari_scsi.c,
consistent with other NCR5380 drivers.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Signed-off-by: Christoph Hellwig

atari_scsi: Convert to platform device

2014-11-20T08:11:14+00:00

Convert atari_scsi to platform device and eliminate scsi_register().

Validate __setup options later on so that module options are checked as well.

Remove the comment about the scsi mid-layer disabling the host irq as it
is no longer true (AFAICT). Also remove the obsolete slow interrupt stuff
(IRQ_TYPE_SLOW == 0 anyway).

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Acked-by: Geert Uytterhoeven 
Signed-off-by: Christoph Hellwig

ncr5380: Remove pointless compiler command line override macros

2014-11-20T08:11:09+00:00

Compile-time override of scsi host defaults is pointless for drivers that
provide module parameters and __setup options for that. Too many macros make
the code hard to read so remove them.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Signed-off-by: Christoph Hellwig

ncr5380: Cleanup host info() methods

2014-11-20T08:11:08+00:00

If the host->info() method is not set, then host->name is used by default.
For atari_scsi, that is exactly the same text. So remove the redundant
info() method. Keep sun3_scsi.c in line with atari_scsi.

Some NCR5380 drivers return an empty string from the info() method
(arm/cumana_1.c arm/oak.c mac_scsi.c) while other drivers use the default
(dmx3191d dtc.c g_NCR5380.c pas16.c t128.c).

Implement a common info() method to replace a lot of duplicated code which
the various drivers use to announce the same information.

This replaces most of the (deprecated) show_info() output and all of the
NCR5380_print_info() output. This also eliminates a bunch of code in
g_NCR5380 which just duplicates functionality in the core driver.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Signed-off-by: Christoph Hellwig

ncr5380: Remove unused macros

2014-11-20T08:11:04+00:00

Some macros are never evaluated (i.e. FOO, USLEEP, SCSI2 and USE_WRAPPER;
and in some drivers, NCR5380_intr and NCR5380_proc_info). DRIVER_SETUP
serves no purpose anymore. Remove these macro definitions.

Signed-off-by: Finn Thain 
Reviewed-by: Hannes Reinecke 
Tested-by: Michael Schmitz 
Signed-off-by: Christoph Hellwig

scsi/NCR5380: remove unused macro definitions

2014-05-28T10:11:08+00:00

Remove the unused (and divergent) debugging macro definitions from
the sun3_NCR5380 and atari_NCR5380 drivers. These drivers have been
converted to use the common macros in NCR5380.h.

Signed-off-by: Finn Thain 
Acked-by: Sam Creasey 
Acked-by: Michael Schmitz 
Signed-off-by: Christoph Hellwig

m68k/atari - atari_scsi: change abort/reset return codes

2014-05-19T17:12:24+00:00

[Resend of earlier patch - added equivalent changes to sun3 NCR5380 code]

The abort/reset lowlevel return codes had changed with the new
error SCSI handling - update Atari and Sun3 NCR5380 drivers to reflect this.

Change reset handling for Atari to clear queues only, do not attempt
to call done() on each command aborted by the reset. The EH code
should do that for us. Queues _must_ be cleared, otherwise
atari_scsi_bus_reset will not release the ST-DMA lock, deadlocking
further error recovery.

Update the Sun3 NCR5380 driver as well - the Sun3 driver was
derived from the Atari one. Kudos to Finn Thain for the Sun3 part
and cleaning up the header files. After the header cleanup, the
initio.h include (!) can be dropped from sun3_scsi.h now.

Signed-off-by: Michael Schmitz 
Signed-off-by: Finn Thain 
Acked-by: Sam Creasey 
Cc: Geert Uytterhoeven 
Cc: James E.J. Bottomley 
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Christoph Hellwig

atari_scsi: switch to ->show_info()

2013-04-09T18:13:29+00:00

Signed-off-by: Al Viro

scsi/atari: Make more functions static

2012-04-22T18:16:49+00:00

Signed-off-by: Geert Uytterhoeven 
Cc: Michael Schmitz 
Cc: James E.J. Bottomley 
Cc: linux-scsi@vger.kernel.org

m68k: Atari SCSI driver compile fixes

2007-05-05T00:59:05+00:00

Atari SCSI driver compile fixes

Signed-off-by: Roman Zippel 
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Linus Torvalds