linux.git/drivers/scsi/aacraid, branch v4.16

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-02-23T22:09:43+00:00

Pull SCSI fixes from James Bottomley:
 "These are mostly fixes for problems with merge window code.

  In addition we have one doc update (alua) and two dead code removals
  (aiclib and octogon) a spurious assignment removal (csiostor) and a
  performance improvement for storvsc involving better interrupt
  spreading and increasing the command per lun handling"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla4xxx: skip error recovery in case of register disconnect.
  scsi: aacraid: fix shutdown crash when init fails
  scsi: qedi: Cleanup local str variable
  scsi: qedi: Fix truncation of CHAP name and secret
  scsi: qla2xxx: Fix incorrect handle for abort IOCB
  scsi: qla2xxx: Fix double free bug after firmware timeout
  scsi: storvsc: Increase cmd_per_lun for higher speed devices
  scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
  scsi: scsi_dh: Document alua_rtpg_queue() arguments
  scsi: Remove Makefile entry for oktagon files
  scsi: aic7xxx: remove aiclib.c
  scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
  scsi: sym53c8xx_2: iterator underflow in sym_getsync()
  scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
  scsi: csiostor: remove redundant assignment to pointer 'ln'
  scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
  scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
  scsi: qla2xxx: Fix memory corruption during hba reset test
  scsi: mpt3sas: fix an out of bound write

scsi: aacraid: fix shutdown crash when init fails

2018-02-14T02:35:40+00:00

When aacraid init fails with "AAC0: adapter self-test failed.", shutdown
leads to UBSAN warning and then oops:

[154316.118423] ================================================================================
[154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27
[154316.118566] member access within null pointer of type 'struct Scsi_Host'
[154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G        W        4.15.0-dirty #89
[154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003
[154316.118774] Call Trace:
[154316.118848]  dump_stack+0x48/0x65
[154316.118916]  ubsan_epilogue+0xe/0x40
[154316.118976]  __ubsan_handle_type_mismatch+0xfb/0x180
[154316.119043]  scsi_block_requests+0x20/0x30
[154316.119135]  aac_shutdown+0x18/0x40 [aacraid]
[154316.119196]  pci_device_shutdown+0x33/0x50
[154316.119269]  device_shutdown+0x18a/0x390
[...]
[154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4
[154316.123515] IP: scsi_block_requests+0xa/0x30

This is because aac_shutdown() does

        struct Scsi_Host *shost = pci_get_drvdata(dev);
        scsi_block_requests(shost);

and that assumes shost has been assigned with pci_set_drvdata().

However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far
after bailing out with error from calling the init function
((*aac_drivers[index].init)(aac)), and when the init function fails, no
error is returned from aac_probe_one() so PCI layer assumes there is
driver attached, and tries to shut it down later.

Fix it by returning error from aac_probe_one() when card-specific init
function fails.

This fixes reboot on my HP NetRAID-4M with dead battery.

Signed-off-by: Meelis Roos 
Reviewed-by: Dave Carroll 
Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-01-31T19:23:28+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual driver suspects: arcmsr,
  scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas,
  hisi_sas.

  We also have a rework of the libsas hotplug handling to make it more
  robust, a slew of 32 bit time conversions and fixes, and a host of the
  usual minor updates and style changes. The biggest potential for
  regressions is the libsas hotplug changes, but so far they seem stable
  under testing"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits)
  scsi: qla2xxx: Fix logo flag for qlt_free_session_done()
  scsi: arcmsr: avoid do_gettimeofday
  scsi: core: Add VENDOR_SPECIFIC sense code definitions
  scsi: qedi: Drop cqe response during connection recovery
  scsi: fas216: fix sense buffer initialization
  scsi: ibmvfc: Remove unneeded semicolons
  scsi: hisi_sas: fix a bug in hisi_sas_dev_gone()
  scsi: hisi_sas: directly attached disk LED feature for v2 hw
  scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw
  scsi: megaraid_sas: NVMe passthrough command support
  scsi: megaraid: use ktime_get_real for firmware time
  scsi: fnic: use 64-bit timestamps
  scsi: qedf: Fix error return code in __qedf_probe()
  scsi: devinfo: fix format of the device list
  scsi: qla2xxx: Update driver version to 10.00.00.05-k
  scsi: qla2xxx: Add XCB counters to debugfs
  scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
  scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event()
  scsi: qla2xxx: Fix warning during port_name debug print
  scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
  ...

scsi: aacraid: Delay for rescan worker needs to be 10 seconds

2018-01-11T04:25:12+00:00

The delay for the rescan worker needs to 10 seconds, missed the HZ in
there.

Fixes: a1367e4adee207fe (scsi: aacraid: Reschedule host scan in case of failure)
Signed-off-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen

scsi: aacraid: Get correct lun count

2018-01-11T04:25:11+00:00

The correct lun count needs to be divided by 24, missed it in the
previous patch set.

Fixes: 4b00022753550055 (scsi: aacraid: Create helper functions to get lun info)
Signed-off-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen

scsi: aacraid: remove redundant setting of variable c

2018-01-09T02:49:09+00:00

A previous commit no longer stores the contents of c, so we now have a
situation where c is being updated but the value is never read. Clean up
the code by removing the now redundant setting of variable c.

Cleans up clang warning:
drivers/scsi/aacraid/aachba.c:943:3: warning: Value stored to 'c' is
never read

Fixes: f4e8708d3104 ("scsi: aacraid: Fix udev inquiry race condition")
Signed-off-by: Colin Ian King 
Reviewed-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen

scsi: aacraid: Fix driver oops with dead battery

2018-01-04T06:03:41+00:00

The battery in my HP NetRAID-4M died of old age, and the aacraid driver
started oopsing with NULL pointer dereference on startup after that.

Fix it by reordering the init sequence to fill in function pointers
before ioremapping memory, or dev->a_ops.adapter_ioremap pointer will be
NULL.

Other subtypes of aacraid seem to have the order already correct.

This was the call trace:

 ? aac_probe_one+0x7a5/0xb30 [aacraid]
 pci_device_probe+0xc0/0x1a0
 driver_probe_device+0x1df/0x3b0
 __driver_attach+0xa9/0xe0
 ? driver_probe_device+0x3b0/0x3b0
 bus_for_each_dev+0x4c/0x90
 driver_attach+0x1d/0x40
 ? driver_probe_device+0x3b0/0x3b0
 bus_add_driver+0x1a7/0x2a0
 driver_register+0x6e/0x130
 __pci_register_driver+0x54/0x90
 ? 0xf81f4000
 aac_init+0x2b/0x1000 [aacraid]
 do_one_initcall+0x45/0x1e0
 ? kfree_skbmem+0x74/0xa0
 ? kfree+0x16d/0x240
 ? kvfree+0x45/0x50
 ? kvfree+0x45/0x50
 ? __vunmap+0x99/0x120
 ? do_init_module+0x1a/0x245
 do_init_module+0x83/0x245
 load_module+0x2764/0x34a0
 ? kernel_read_file+0x150/0x320
 SyS_finit_module+0x82/0xa0
 do_fast_syscall_32+0xba/0x340

Signed-off-by: Meelis Roos 
Reviewed-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen

scsi: aacraid: Update driver version to 50877

2018-01-04T04:26:43+00:00

Update driver Version to 50877

Signed-off-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen

scsi: aacraid: Remove AAC_HIDE_DISK check in queue command

2018-01-04T04:26:43+00:00

Earlier driver would scan throgh all supported buses and targets and add
devices that responded. It would add devices that were _hidden_ by the fw.
Driver would invalidate commands sent to _hidden_ devices via the
AAC_HIDE_DISK check.

Since the driver now adds only the devices that are supposed to be
exposed, this code can be removed.

Signed-off-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen

scsi: aacraid: Remove unused rescan variable

2018-01-04T04:26:43+00:00

Remove unused rescan variable.

Signed-off-by: Raghava Aditya Renukunta 
Signed-off-by: Martin K. Petersen