linux.git/drivers/rtc, branch v6.5 Linux kernel source tree Merge tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 2023-07-03T17:43:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-07-03T17:43:10+00:00 b349de4c91e6ad761c2beecc796615bcb64b36e6 Pull RTC updates from Alexandre Belloni: "The isl1208 dirver was reworked tobe able to work as part of an MFD. All the Loongson chips are now supported through a new driver, the old one is removed. Summary: Subsystem: - Switch i2c drivers back to use .probe() - Constify pointers to hwmon_channel_info New driver: - Loongson on chip RTC, replacing the Loongson 1 only driver Drivers: - isl1208: cleanup and support for RAA215300 - st-lpc: cleanups - stm32: fix wakeup" * tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits) rtc: Add rtc driver for the Loongson family chips rtc: Remove the Loongson-1 RTC driver dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles rtc: rv3028: make rv3028 probeable from userspace rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300 rtc: isl1208: Add isl1208_set_xtoscb() rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[] rtc: isl1208: Make similar I2C and DT-based matching table rtc: isl1208: Drop name variable dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties dt-bindings: rtc: isl1208: Convert to json-schema rtc: st-lpc: Simplify clk handling in st_rtc_probe() rtc: st-lpc: Release some resources in st_rtc_probe() in case of error rtc: stm32: remove dedicated wakeup management dt-bindings: rtc: restrict node name suffixes rtc: add HAS_IOPORT dependencies rtc: Switch i2c drivers back to use .probe() rtc: rv3032: constify pointers to hwmon_channel_info rtc: isl12022: constify pointers to hwmon_channel_info rtc: ds3232: constify pointers to hwmon_channel_info ... 
Pull RTC updates from Alexandre Belloni:
 "The isl1208 dirver was reworked tobe able to work as part of an MFD.

  All the Loongson chips are now supported through a new driver, the old
  one is removed.

  Summary:

  Subsystem:
   - Switch i2c drivers back to use .probe()
   - Constify pointers to hwmon_channel_info

  New driver:
   - Loongson on chip RTC, replacing the Loongson 1 only driver

  Drivers:
   - isl1208: cleanup and support for RAA215300
   - st-lpc: cleanups
   - stm32: fix wakeup"

* tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits)
  rtc: Add rtc driver for the Loongson family chips
  rtc: Remove the Loongson-1 RTC driver
  dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles
  rtc: rv3028: make rv3028 probeable from userspace
  rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
  rtc: isl1208: Add isl1208_set_xtoscb()
  rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
  rtc: isl1208: Make similar I2C and DT-based matching table
  rtc: isl1208: Drop name variable
  dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties
  dt-bindings: rtc: isl1208: Convert to json-schema
  rtc: st-lpc: Simplify clk handling in st_rtc_probe()
  rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
  rtc: stm32: remove dedicated wakeup management
  dt-bindings: rtc: restrict node name suffixes
  rtc: add HAS_IOPORT dependencies
  rtc: Switch i2c drivers back to use .probe()
  rtc: rv3032: constify pointers to hwmon_channel_info
  rtc: isl12022: constify pointers to hwmon_channel_info
  rtc: ds3232: constify pointers to hwmon_channel_info
  ...
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2023-06-29T17:05:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-29T17:05:47+00:00 ff7ddcf0db48a7d9ae536eb0875428117be1d1f1 Pull clk updates from Stephen Boyd: "This batch of clk driver updates contains almost no new SoC support. Instead there's a treewide patch series from Maxime that makes clk_ops::determine_rate mandatory for muxes. Beyond that core framework change we have the usual pile of clk driver updates such as migrating i2c drivers to use .probe() again or YAMLfication of clk DT bindings so we can validate DTBs. Overall the SoCs that got the most updates this time around in terms of diffstat are the Amlogic and Mediatek drivers because they added new SoC support or fixed up various drivers to have proper data. In general things look kinda quiet. I suspect the core framework change may still shake out some problems after the merge window, mostly because not everyone tests linux-next where that series has been for some number of weeks. I saw that there's at least one pending fix for Tegra that needs to be wrapped up into a proper patch. I'll try to catch those bits before the window closes so that -rc1 is bootable. More details below. Core: - Make clk_ops::determine_rate mandatory for muxes New Drivers: - Add amlogic a1 SoC family PLL and peripheral clock controller support Updates: - Handle allocation failures from kasprintf() and friends - Migrate platform clk drivers to .remove_new() - Migrate i2c clk drivers to .probe() instead of .probe_new() - Remove CLK_SET_PARENT from all Mediatek MSDC core clocks - Add infra_ao reset support for Mediatek MT8188 SoCs - Align driver_data to i2c_device_id tables in some i2c clk drivers - Use device_get_match_data() in vc5 clk driver - New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip FPGA clock drivers - Use of_property_read_bool() to read "microchip,pic32mzda-sosc" boolean DT property in clk-pic32mzda - Convert AT91 clock dt-bindings to YAML - Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX - Keep i.MX UART clocks enabled during kernel boot if earlycon is set - Drop imx_unregister_clocks() as there are no users anymore - Switch to _safe iterator on imx_clk_scu_unregister() to avoid use after free - Add determine_rate op to the imx8m composite clock - Use device managed API for iomap and kzalloc for i.MXRT1050, i.MX8MN, i.MX8MP and i.MX93 clock controller drivers - Add missing interrupt DT property for the i.MX8M clock controller - Re-add support for Exynos4212 clock controller because we are re-introducing the SoC in the mainline - Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve some objtool warnings - Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC - Convert the Renesas clock drivers to readl_poll_timeout_atomic() - Add PWM clock on Renesas R-Car V3U - Fix PLL5 on Renesas RZ/G2L and RZ/V2L" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits) clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro clk: Fix memory leak in devm_clk_notifier_register() clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes clk: mvebu: Use of_get_cpu_hwid() to read CPU ID MAINTAINERS: Add Marvell mvebu clock drivers clk: clocking-wizard: check return value of devm_kasprintf() clk: ti: clkctrl: check return value of kasprintf() clk: keystone: sci-clk: check return value of kasprintf() clk: si5341: free unused memory on probe failure clk: si5341: check return value of {devm_}kasprintf() clk: si5341: return error if one synth clock registration fails clk: cdce925: check return value of kasprintf() clk: vc5: check memory returned by kasprintf() clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks clk: keystone: syscon-clk: Add support for audio refclk dt-bindings: clock: Add binding documentation for TI Audio REFCLK dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible clk: keystone: syscon-clk: Allow the clock node to not be of type syscon ... 
Pull clk updates from Stephen Boyd:
 "This batch of clk driver updates contains almost no new SoC support.
  Instead there's a treewide patch series from Maxime that makes
  clk_ops::determine_rate mandatory for muxes.

  Beyond that core framework change we have the usual pile of clk driver
  updates such as migrating i2c drivers to use .probe() again or
  YAMLfication of clk DT bindings so we can validate DTBs.

  Overall the SoCs that got the most updates this time around in terms
  of diffstat are the Amlogic and Mediatek drivers because they added
  new SoC support or fixed up various drivers to have proper data.

  In general things look kinda quiet. I suspect the core framework
  change may still shake out some problems after the merge window,
  mostly because not everyone tests linux-next where that series has
  been for some number of weeks. I saw that there's at least one pending
  fix for Tegra that needs to be wrapped up into a proper patch. I'll
  try to catch those bits before the window closes so that -rc1 is
  bootable. More details below.

  Core:
   - Make clk_ops::determine_rate mandatory for muxes

  New Drivers:
   - Add amlogic a1 SoC family PLL and peripheral clock controller support

  Updates:
   - Handle allocation failures from kasprintf() and friends
   - Migrate platform clk drivers to .remove_new()
   - Migrate i2c clk drivers to .probe() instead of .probe_new()
   - Remove CLK_SET_PARENT from all Mediatek MSDC core clocks
   - Add infra_ao reset support for Mediatek MT8188 SoCs
   - Align driver_data to i2c_device_id tables in some i2c clk drivers
   - Use device_get_match_data() in vc5 clk driver
   - New Kconfig symbol name (SOC_MICROCHIP_POLARFIRE) for Microchip
     FPGA clock drivers
   - Use of_property_read_bool() to read "microchip,pic32mzda-sosc"
     boolean DT property in clk-pic32mzda
   - Convert AT91 clock dt-bindings to YAML
   - Remove CLK_SET_RATE_PARENT flag from LDB clocks on i.MX6SX
   - Keep i.MX UART clocks enabled during kernel boot if earlycon is set
   - Drop imx_unregister_clocks() as there are no users anymore
   - Switch to _safe iterator on imx_clk_scu_unregister() to avoid use
     after free
   - Add determine_rate op to the imx8m composite clock
   - Use device managed API for iomap and kzalloc for i.MXRT1050,
     i.MX8MN, i.MX8MP and i.MX93 clock controller drivers
   - Add missing interrupt DT property for the i.MX8M clock controller
   - Re-add support for Exynos4212 clock controller because we are
     re-introducing the SoC in the mainline
   - Add CONFIG_OF dependency to Samsung clk Kconfig symbols to solve
     some objtool warnings
   - Preselect PLL MIPI as TCON0 parent for Allwinner A64 SoC
   - Convert the Renesas clock drivers to readl_poll_timeout_atomic()
   - Add PWM clock on Renesas R-Car V3U
   - Fix PLL5 on Renesas RZ/G2L and RZ/V2L"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (149 commits)
  clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
  clk: Fix memory leak in devm_clk_notifier_register()
  clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
  clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
  MAINTAINERS: Add Marvell mvebu clock drivers
  clk: clocking-wizard: check return value of devm_kasprintf()
  clk: ti: clkctrl: check return value of kasprintf()
  clk: keystone: sci-clk: check return value of kasprintf()
  clk: si5341: free unused memory on probe failure
  clk: si5341: check return value of {devm_}kasprintf()
  clk: si5341: return error if one synth clock registration fails
  clk: cdce925: check return value of kasprintf()
  clk: vc5: check memory returned by kasprintf()
  clk: mediatek: clk-mt8173-apmixedsys: Fix iomap not released issue
  clk: mediatek: clk-mt8173-apmixedsys: Fix return value for of_iomap() error
  clk: mediatek: clk-mtk: Grab iomem pointer for divider clocks
  clk: keystone: syscon-clk: Add support for audio refclk
  dt-bindings: clock: Add binding documentation for TI Audio REFCLK
  dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
  clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
  ...
rtc: Add rtc driver for the Loongson family chips 2023-06-25T23:19:11+00:00 Binbin Zhou zhoubinbin@loongson.cn 2023-06-02T09:50:48+00:00 1b733a9ebc3d8011ca66ec6ff17f55a440358794 The Loongson family chips use an on-chip counter 0 (Time Of Year counter) as the RTC. We will refer to them as rtc-loongson. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: Yang Ling <gnaygnil@gmail.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # LS7A Link: https://lore.kernel.org/r/0c5171156390f614d72f36ceb04a20f432ca639e.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
The Loongson family chips use an on-chip counter 0 (Time Of Year
counter) as the RTC. We will refer to them as rtc-loongson.

Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: Yang Ling <gnaygnil@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # LS7A
Link: https://lore.kernel.org/r/0c5171156390f614d72f36ceb04a20f432ca639e.1685693501.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: Remove the Loongson-1 RTC driver 2023-06-25T23:19:11+00:00 Binbin Zhou zhoubinbin@loongson.cn 2023-06-02T09:50:21+00:00 9fb23090658adbd7f8f44bf5c38aa3fc4b1699bd Remove the ls1x-rtc driver as it is obsolete. We will continue to support the ls1x RTC in the upcoming Loongson unified RTC driver rtc-loongson. Cc: Keguang Zhang <keguang.zhang@gmail.com> Cc: zhao zhang <zhzhl555@gmail.com> Cc: Yang Ling <gnaygnil@gmail.com> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Link: https://lore.kernel.org/r/c38c666015a162d7031b20a48209ce577bab62cd.1685693501.git.zhoubinbin@loongson.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
Remove the ls1x-rtc driver as it is obsolete. We will continue to
support the ls1x RTC in the upcoming Loongson unified RTC driver
rtc-loongson.

Cc: Keguang Zhang <keguang.zhang@gmail.com>
Cc: zhao zhang <zhzhl555@gmail.com>
Cc: Yang Ling <gnaygnil@gmail.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Keguang Zhang <keguang.zhang@gmail.com>
Link: https://lore.kernel.org/r/c38c666015a162d7031b20a48209ce577bab62cd.1685693501.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: rv3028: make rv3028 probeable from userspace 2023-06-25T23:05:13+00:00 Johannes Kirchmair johannes.kirchmair@sigmatek.at 2023-03-27T08:55:50+00:00 7e2a60efab8ad901c4743137857c1c5e18e27ed8 With this commit, it will be possible to bind a rv3028 device from userspace This is done by: echo rtc-rv3028 0x52 > /sys/bus/i2c/devices/i2c-XX/new_device Signed-off-by: Johannes Kirchmair <johannes.kirchmair@sigmatek.at> Link: https://lore.kernel.org/r/20230327085550.1721861-1-johannes.kirchmair@sigmatek.at Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
With this commit, it will be possible to bind a rv3028 device from
userspace

This is done by:
echo rtc-rv3028 0x52 > /sys/bus/i2c/devices/i2c-XX/new_device

Signed-off-by: Johannes Kirchmair <johannes.kirchmair@sigmatek.at>
Link: https://lore.kernel.org/r/20230327085550.1721861-1-johannes.kirchmair@sigmatek.at
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300 2023-06-25T22:58:21+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-06-23T14:09:48+00:00 fdd63f65ac25d0851dade4c7ba94a7a882b8d9c2 The built-in RTC found on PMIC RAA215300 is the same as ISL1208. However, the external oscillator bit is inverted on PMIC version 0x11. The PMIC driver detects PMIC version and instantiates the RTC device based on i2c_device_id. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230623140948.384762-11-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
The built-in RTC found on PMIC RAA215300 is the same as ISL1208.
However, the external oscillator bit is inverted on PMIC version
0x11. The PMIC driver detects PMIC version and instantiates the
RTC device based on i2c_device_id.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230623140948.384762-11-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: isl1208: Add isl1208_set_xtoscb() 2023-06-25T22:58:21+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-06-23T14:09:47+00:00 262f72b4656e182eefaab91ab24a7575dda5524f As per the HW manual, set the XTOSCB bit as follows: If using an external clock signal, set the XTOSCB bit as 1 to disable the crystal oscillator. If using an external crystal, the XTOSCB bit needs to be set at 0 to enable the crystal oscillator. Add isl1208_set_xtoscb() to set XTOSCB bit based on the clock-names property. Fallback is enabling the internal crystal oscillator. While at it, introduce a variable "sr" for reading the status register in probe() as it is reused for writing and also remove the unnecessary blank line. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230623140948.384762-10-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
As per the HW manual, set the XTOSCB bit as follows:

If using an external clock signal, set the XTOSCB bit as 1 to
disable the crystal oscillator.

If using an external crystal, the XTOSCB bit needs to be set at 0
to enable the crystal oscillator.

Add isl1208_set_xtoscb() to set XTOSCB bit based on the clock-names
property. Fallback is enabling the internal crystal oscillator.

While at it, introduce a variable "sr" for reading the status register
in probe() as it is reused for writing and also remove the unnecessary
blank line.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230623140948.384762-10-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[] 2023-06-25T22:58:21+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-06-23T14:09:46+00:00 5923fc75d0dfcebce53894ddada7e2440d756f8b Drop enum isl1208_id and split the array isl1208_configs[] as individual variables, and make lines shorter by referring to e.g. &config_isl1219 instead of &isl1208_configs[TYPE_ISL1219]. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230623140948.384762-9-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
Drop enum isl1208_id and split the array isl1208_configs[] as individual
variables, and make lines shorter by referring to e.g. &config_isl1219
instead of &isl1208_configs[TYPE_ISL1219].

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230623140948.384762-9-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: isl1208: Make similar I2C and DT-based matching table 2023-06-25T22:58:21+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-06-23T14:09:45+00:00 fbc06a53561c64ec6d7f9a1b3bc04597de4cbb2d The isl1208_id[].driver_data could store a pointer to the config, like for DT-based matching, making I2C and DT-based matching more similar. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230623140948.384762-8-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
The isl1208_id[].driver_data could store a pointer to the config,
like for DT-based matching, making I2C and DT-based matching
more similar.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230623140948.384762-8-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rtc: isl1208: Drop name variable 2023-06-25T22:58:21+00:00 Biju Das biju.das.jz@bp.renesas.com 2023-06-23T14:09:44+00:00 380960c40a1d106bba3476c9a010eaf28195115d Drop unused name variable from struct isl1208_config. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230623140948.384762-7-biju.das.jz@bp.renesas.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
Drop unused name variable from struct isl1208_config.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230623140948.384762-7-biju.das.jz@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>