linux.git/drivers/rtc/rtc-omap.c, branch v2.6.31

rtc: struct device - replace bus_id with dev_name(), dev_set_name()

2009-03-24T23:38:22+00:00

Cc: a.zummo@towertech.it
Cc: rtc-linux@googlegroups.com
Signed-off-by: Kay Sievers 
Signed-off-by: Alessandro Zummo 
Signed-off-by: Greg Kroah-Hartman

drivers/rtc/: use bcd2bin/bin2bcd

2008-10-20T15:52:41+00:00

Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of
the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk 
Acked-by: Alessandro Zummo 
Cc: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: rtc-omap footprint shrinkage

2008-07-24T17:47:33+00:00

Shrink the runtime footprint of the OMAP1 RTC driver a bunch by removing
some old hacks and switching to platform_driver_probe().

Signed-off-by: David Brownell 
Cc: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[RTC] remove references to asm/mach/time.h

2008-05-22T13:56:35+00:00

asm/mach/time.h is the ARM header file for setting up kernel ticker
timekeeping (be that the old jiffy interrupt or the new clocksource.)
RTC drivers have no business using this header file, and in fact do
not require it.

Build tested on at91sam9rl, omap and s3c2410 configurations.

Acked-by: Alessandro Zummo 
Acked-by: Andrew Victor 
Signed-off-by: Russell King

rtc: fix platform driver hotplug/coldplug

2008-04-11T15:06:44+00:00

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable RTC
platform drivers, to re-enable module auto loading.

[dbrownell@users.sourceforge.net: more drivers, minor fix]
Signed-off-by: Kay Sievers 
Signed-off-by: David Brownell 
Cc: Greg KH 
Cc: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc-omap build fix

2007-05-17T12:23:05+00:00

Fix typo which breaks build.  How did that happen?

Signed-off-by: David Brownell 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: remove "RTC_ALM_SET mode" bugs

2007-05-08T18:15:19+00:00

This fixes a common glitch in how RTC drivers handle two "set alarm" modes,
by getting rid of the surprising/hidden one that was rarely implemented
correctly (and which could expose nonportable hardware-specific behavior).

The glitch comes from the /dev/rtcX logic implementing the legacy
RTC_ALM_SET (limited to 24 hours, needing RTC_AIE_ON) ioctl on top of the
RTC driver call providing access to the newer RTC_WKALM_SET (without those
limitations) by initializing the day/month/year fields to be invalid ...
that second mode.

Now, since few RTC drivers check those fields, and most hardware misbehaves
when faced with invalid date fields, many RTC drivers will set bogus alarm
times on those RTC_ALM_SET code paths.  (Several in-tree drivers have that
issue, and I also noticed it with code reviews on several new RTC drivers.)

This patch ensures that RTC drivers never see such invalid alarm fields, by
moving some logic out of rtc-omap into the RTC_ALM_SET code and adding an
explicit check (which will prevent the issue on other code paths).

Signed-off-by: David Brownell 
Cc: Scott Wood 
Cc: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: suspend()/resume() restores system clock

2007-05-08T18:15:18+00:00

RTC class suspend/resume support, re-initializing the system clock on resume
from the clock used to initialize it at boot time.

 - The reinit-on-resume is hooked to the existing RTC_HCTOSYS config
   option, on the grounds that a clock good enough for init must also
   be good enough for re-init.

 - Inlining a version of the code used by ARM, to save and restore the
   delta between a selected RTC and the current system wall-clock time.

 - Removes calls to that ARM code from AT91, OMAP1, and S3C RTCs.  This
   means that systems using those RTCs across suspend/resume will likely
   want to change their kernel configs to enable RTC_HCTOSYS.

   If HCTOSYS isn't using a second RTC (with battery?), this changes the
   system's initial date from Jan 1970 to the epoch this hardware uses:
   1998 for AT91, 2000 for OMAP1 (assuming no split power mode), etc.

This goes on top of the patch series removing "struct class_device" usage
from the RTC framework.  That's all needed for class suspend()/resume().

Signed-off-by: David Brownell 
Acked-by: Greg Kroah-Hartman 
Acked-By: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: remove rest of class_device

2007-05-08T18:15:18+00:00

Finish converting the RTC framework so it no longer uses class_device.

Signed-off-by: David Brownell 
Acked-by: Greg Kroah-Hartman 
Acked-By: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

rtc: rtc interfaces don't use class_device

2007-05-08T18:15:18+00:00

This patch removes class_device from the programming interface that the RTC
framework exposes to the rest of the kernel.  Now an rtc_device is passed,
which is more type-safe and streamlines all the relevant code.

Signed-off-by: David Brownell 
Acked-by: Greg Kroah-Hartman 
Acked-By: Alessandro Zummo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds