linux.git/drivers/rtc/Makefile, branch v4.14-rc2

rtc: Add Realtek RTD1295

2017-09-05T07:55:02+00:00

Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and
mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions.

The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and
Beelink Lake I.

Signed-off-by: Andreas Färber 
Signed-off-by: Alexandre Belloni

rtc: goldfish: Add RTC driver for Android emulator

2017-08-31T23:10:18+00:00

Add device driver for a virtual RTC device in Android emulator.

The compatible string used by OS for binding the driver is defined
as "google,goldfish-rtc".

Signed-off-by: Miodrag Dinic 
Signed-off-by: Goran Ferenc 
Signed-off-by: Aleksandar Markovic 
Signed-off-by: Alexandre Belloni

rtc: add generic nvmem support

2017-07-07T11:14:14+00:00

Many RTCs have an on board non volatile storage. It can be battery backed
RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace
and in-kernel consumers.

This stays compatible with the previous (non documented) ABI that was using
/sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about
the deprecation.

Signed-off-by: Alexandre Belloni

rtc: gemini/ftrtc010: rename driver and symbols

2017-07-06T20:37:15+00:00

The Gemini RTC is actually a generic IP block from Faraday
Technology names FTRTC010. Rename the driver file and all
symbols to match this IP name.

The relationship can be clearly seen in the U-Boot driver
posted by Po-Yu Chuang for the Faraday A320 board:
https://lists.denx.de/pipermail/u-boot/2009-September/061326.html

Remove the dependency on ARCH_GEMINI but select the driver
for ARCH_GEMINI so we get a smooth transition. The IP block
is synthsized on different silicon and architectures.

Cc: Po-Yu Chuang 
Acked-by: Hans Ulli Kroll 
Signed-off-by: Linus Walleij 
Signed-off-by: Alexandre Belloni

rtc: brcmstb-waketimer: Add Broadcom STB wake-timer

2017-07-05T21:11:59+00:00

This adds support for the Broadcom STB wake-timer which is a timer in
the chip's 27Mhz clock domain that offers the ability to wake the system
(wake-up source) from suspend states (S2, S3, S5). It is supported using
the rtc framework allowing us to configure alarms for system wake-up.

Signed-off-by: Brian Norris 
Signed-off-by: Markus Mayer 
Signed-off-by: Florian Fainelli 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Alexandre Belloni

rtc: cpcap: new rtc driver

2017-03-09T00:32:35+00:00

This driver supports the Motorola CPCAP PMIC found on
some of Motorola's mobile phones, such as the Droid 4.

Tested-by: Tony Lindgren 
Signed-off-by: Sebastian Reichel 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

rtc: add STM32 RTC driver

2017-01-13T00:40:31+00:00

This patch adds support for the STM32 RTC.

Signed-off-by: Amelie Delaunay 
Reviewed-by: Mathieu Poirier 
Signed-off-by: Alexandre Belloni

rtc: add support for EPSON TOYOCOM RTC-7301SF/DG

2016-12-18T23:59:21+00:00

This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.

Signed-off-by: Akinobu Mita 
Acked-by: Rob Herring 
Signed-off-by: Alexandre Belloni

rtc: isl12057: remove driver

2016-08-31T16:21:34+00:00

The Intersil isl12057 is now supported by the ds1307 driver.

Acked-by: Arnaud Ebalard 
Signed-off-by: Alexandre Belloni

rtc: ac100: Add RTC driver for X-Powers AC100

2016-08-08T11:53:36+00:00

X-Powers AC100 is a codec / RTC combo chip. This driver supports
the RTC sub-device.

The RTC block also has clock outputs and non-volatile storage.
Non-volatile storage wthin the RTC hardware is not supported.
Clock output support is added in the next patch.

Signed-off-by: Chen-Yu Tsai 
Acked-by: Alexandre Belloni 
Signed-off-by: Lee Jones