Instead of grouping several different reset lines into one composite
reset, decouple them to individual ones which make it more aligned
with underlying hardware. And for DWC USB driver, it will match well
with the number of the reset property in the DT bindings.

The DWC3 USB host controller in K3 SoC has three reset lines - AHB, VCC,
PHY. The PCIe controller also has three reset lines - DBI, Slave, Master.
Also three reset lines each for UCIE and RCPU block.

As an agreement with maintainer, the reset IDs has been rearranged as
contiguous number but keep most part unchanged to avoid break patches
which already sent to mailing list. The changes of DT binding header file
and reset driver are merged together as one single commit to avoid
git-bisect breakage.

Fixes: 938ce3b16582 ("reset: spacemit: Add SpacemiT K3 reset driver")
Fixes: 216e0a5e98e5 ("dt-bindings: soc: spacemit: Add K3 reset support and IDs")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

When __auxiliary_device_add() fails, reset_add_gpio_aux_device()
calls auxiliary_device_uninit(adev).

The device release callback reset_gpio_aux_device_release() frees
adev, but the current error path then calls kfree(adev) again,
causing a double free.

Keep kfree(adev) for the auxiliary_device_init() failure path, but
avoid freeing adev after auxiliary_device_uninit().

Fixes: 5fc4e4cf7a22 ("reset: gpio: use software nodes to setup the GPIO lookup")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Fix a malformed MODULE_AUTHOR macro in the RZ/G2L USBPHY control driver
where the author's name and opening angle bracket were missing, leaving
only the email address with a stray closing >. Correct it to the standard
Name <email> format.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

The pwrrdy regmap_filed is allocated in rzg2l_usbphy_ctrl_pwrrdy_init()
only if the driver data is set to RZG2L_USBPHY_CTRL_PWRRDY. Check that
pwrrdy is valid before using it to avoid "Unable to handle kernel NULL
pointer dereference at virtual address" errors.

Fixes: c5b7cd9adefc ("reset: rzg2l-usbphy-ctrl: Add suspend/resume support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.

As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>

Add support for the SpacemiT K3 SoC reset controller. The K3 reset
driver reuses the common reset controller code and provides K3-specific
reset data for devices managed by the following units:

 - MPMU (Main Power Management Unit)
 - APBC (APB clock unit)
 - APMU (Application Subsystem Power Management Unit)
 - DCIU (DMA Control and Interface Unit)

Acked-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Extract the common reset controller code from the K1 driver into
separate reset-spacemit-common.{c,h} files to prepare for additional
SpacemiT SoCs that share the same reset controller architecture.

The common code includes handlers for reset assert and deassert
operations and probing for auxiliary bus devices.

Changes during extraction:
- Module ownership: Use dev->driver->owner instead of THIS_MODULE in
  spacemit_reset_controller_register() to correctly reference the
  calling driver's module.
- Rename spacemit_reset_ids to spacemit_k1_reset_ids.
- Define new namespace "RESET_SPACEMIT" for the exported common
  functions (spacemit_reset_probe) and update K1 driver to import it.

This prepares for additional SpacemiT SoCs (K3) that share the same reset
controller architecture.

Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.

Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.

Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.

Also sort the drivers/reset/Kconfig entries alphabetically.

Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>