Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

scmi_reset_data->handle needs to be initialised at probe, so that it
can be later used to access scmi reset protocol APIs using the same.

Since it was tested with a module that obtained handle elsewhere,
it was missed easily. Add the missing scmi_reset_data->handle
initialisation to fix the issue.

Fixes: c8ae9c2da1cc ("reset: Add support for resets provided by SCMI")
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reported-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

ARM SCMI updates/fixes for v5.4

Handful of fixes/updates including:
1. SCMI v2.0(recently released) support for:
	- Performance protocol fast channels
	- Reset Management Protocol
2. SCMI infrastructure/core support for recieve(Rx) channels,
   asynchronous commands and delayed response
3. Usage of asynchronous commands for clock rate setting and sensor
   reading based on the attributes read from the firmware
4. Miscellaneous cleanups(typos, naming alignment with specification,
   and SPDX License identifier)
5. Couple of fixes: removal of extra check for invalid length and
   additional check to ensure platform/firmware has released shared
   memory before using it in OSPM

* tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (22 commits)
  reset: Add support for resets provided by SCMI
  firmware: arm_scmi: Add RESET protocol in SCMI v2.0
  dt-bindings: arm: Extend SCMI to support new reset protocol
  firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
  firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
  firmware: arm_scmi: Use {get,put}_unaligned_le{32,64} accessors
  firmware: arm_scmi: Use asynchronous CLOCK_RATE_SET when possible
  firmware: arm_scmi: Drop config flag in clk_ops->rate_set
  firmware: arm_scmi: Add asynchronous sensor read if it supports
  firmware: arm_scmi: Drop async flag in sensor_ops->reading_get
  firmware: arm_scmi: Add support for asynchronous commands and delayed response
  firmware: arm_scmi: Add mechanism to unpack message headers
  firmware: arm_scmi: Separate out tx buffer handling and prepare to add rx
  firmware: arm_scmi: Add receive channel support for notifications
  firmware: arm_scmi: Segregate tx channel handling and prepare to add rx
  firmware: arm_scmi: Reorder some functions to avoid forward declarations
  firmware: arm_scmi: Check if platform has released shmem before using
  firmware: arm_scmi: Use the term 'message' instead of 'command'
  firmware: arm_scmi: Fix few trivial typos in comments
  firmware: arm_scmi: Remove extra check for invalid length message responses
  ...

Link: https://lore.kernel.org/r/20190814172454.26191-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

On some ARM based systems, a separate Cortex-M based System Control
Processor(SCP) provides the overall power, clock, reset and system
control. System Control and Management Interface(SCMI) Message Protocol
is defined for the communication between the Application Cores(AP)
and the SCP.

Adds support for the resets provided using SCMI protocol for performing
reset management of various devices present on the SoC. Various reset
functionalities are achieved by the means of different ARM SCMI device
operations provided by the ARM SCMI framework.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The reset-simple driver can be now used on DesignWare IPs by
default by selecting the following compatible strings:
 - snps,dw-high-reset for active high resets inputs
 - snps,dw-low-reset for active low resets inputs

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Some of the mipi dsi resets were called

  IMX8MQ_RESET_MIPI_DIS__

instead of

  IMX8MQ_RESET_MIPI_DSI__

Since they're DSI related this looks like a typo. This fixes the
only in tree user as well to not break bisecting.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

   - A driver for SCU (system control) on NXP i.MX8QXP

   - Qualcomm Always-on Subsystem messaging driver (AOSS QMP)

   - Qualcomm PM support for MSM8998

   - Support for a newer version of DRAM PHY driver for Broadcom (DPFE)

   - Reset controller support for Bitmain BM1880

   - TI SCI (System Control Interface) support for CPU control on AM654
     processors

   - More TI sysc refactoring and rework"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
  reset: remove redundant null check on pointer dev
  soc: rockchip: work around clang warning
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  soc: imx: Add i.MX8MN SoC driver support
  soc: aspeed: lpc-ctrl: Fix probe error handling
  soc: qcom: geni: Add support for ACPI
  firmware: ti_sci: Fix gcc unused-but-set-variable warning
  firmware: ti_sci: Use the correct style for SPDX License Identifier
  soc: imx8: Use existing of_root directly
  soc: imx8: Fix potential kernel dump in error path
  firmware/psci: psci_checker: Park kthreads before stopping them
  memory: move jedec_ddr.h from include/memory to drivers/memory/
  memory: move jedec_ddr_data.c from lib/ to drivers/memory/
  MAINTAINERS: Remove myself as qcom maintainer
  soc: aspeed: lpc-ctrl: make parameter optional
  soc: qcom: apr: Don't use reg for domain id
  soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
  memory: tegra: Fix -Wunused-const-variable
  firmware: tegra: Early resume BPMP
  soc/tegra: Select pinctrl for Tegra194
  ...

Reset controller changes for v5.3

This tag adds support for the Bitmain BM1880 reset controller to the
reset-simple driver and fixes a spelling mistake in the i.MX7 reset
controller binding document.

* tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux:
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  reset: Add reset controller support for BM1880 SoC
  dt-bindings: reset: Add devicetree binding for BM1880 reset controller

Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>

Reset controller fix for v5.2

This tag removes a redundant device pointer NULL check from
__reset_control_get_from_lookup to fix a static code checker
warning.

* tag 'reset-fixes-for-v5.2' of git://git.pengutronix.de/git/pza/linux:
  reset: remove redundant null check on pointer dev

Link: https://lore.kernel.org/r/1562236626.6641.13.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>