Pull regulator fixes from Mark Brown: "A collection of fixes for the regulator API that have come up since the merge window, including a big batch of fixes from Axel Lin's usual careful and detailed review. The one stand out fix here is Dmitry Baryshkov's fix for an issue where we fail to power on the parents of always on regulators during system startup if they weren't already powered on" * tag 'regulator-fix-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits) regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL regulator: hi6421v600: Fix .vsel_mask setting regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837 regulator: atc260x: Fix n_voltages and min_sel for pickable linear ranges regulator: rtmv20: Fix to make regcache value first reading back from HW regulator: mt6315: Fix function prototype for mt6315_map_mode regulator: rtmv20: Add Richtek to Kconfig text regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacks regulator: hisilicon: use the correct HiSilicon copyright regulator: bd71828: Fix .n_voltages settings regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting regulator: max77620: Silence deferred probe error regulator: max77620: Use device_set_of_node_from_dev() regulator: scmi: Fix off-by-one for linear regulators .n_voltages setting regulator: core: resolve supply for boot-on/always-on regulators regulator: fixed: Ensure enable_counter is correct if reg_domain_disable fails regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmap regulator: fan53880: Fix missing n_voltages setting regulator: da9121: Return REGULATOR_MODE_INVALID for invalid mode regulator: fan53555: fix TCS4525 voltage calulation ...
devm_gpiod_get_array_optional may return NULL if no GPIO was assigned. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210603094944.1114156-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
Changing the BD71837 voltages for other regulators except the first 4 BUCKs
should be forbidden when the regulator is enabled. There may be out-of-spec
voltage spikes if the voltage of these "non DVS" bucks is changed when
enabled. This restriction was accidentally removed when the LDO voltage
change was allowed for BD71847. (It was not noticed that the BD71837
BUCK7 used same voltage setting function as LDOs).
Additionally this bug causes incorrect voltage monitoring register access.
The voltage change function accidentally used for bd71837 BUCK7 is
intended to only handle LDO voltage changes. A BD71847 LDO specific
voltage monitoring disabling code gets executed on BD71837 and register
offsets are wrongly calculated as regulator is assumed to be an LDO.
Prevent the BD71837 BUCK7 voltage change when BUCK7 is enabled by using
the correct voltage setting operation.
Fixes: 9bcbabafa19b ("regulator: bd718x7: remove voltage change restriction from BD71847 LDOs")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/bd8c00931421fafa57e3fdf46557a83075b7cc17.1622610103.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .n_voltages was missed for pickable linear ranges, fix it.
The min_sel for each pickable range should be starting from 0.
Also fix atc260x_ldo_voltage_range_sel setting (bit 5 - LDO<N>_VOL_SEL
in datasheet).
Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/20210528230147.363974-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix to make regcache value first reading back from HW. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1622542155-6373-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
The .of_map_mode should has below function prototype: unsigned int (*of_map_mode)(unsigned int mode); Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210530022109.425054-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
The other Richtek drivers has Richtek prefix, make it consistent. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210530124101.477727-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
Current code does not set .curr_table and .n_linear_ranges settings,
so it cannot use the regulator_get/set_current_limit_regmap helpers.
If we setup the curr_table, it will has 200 entries.
Implement customized .set_current_limit/.get_current_limit callbacks
instead.
Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210530124101.477727-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi, The next-20210521 started to fail on Nexus 7 because of the change to regulator core that caused regression of the MAX77620 regulator driver. The regulator driver is now getting a deferred probe and turned out driver wasn't ready for this. The root of the problem is that OF node of the PMIC MFD sub-device is shared with the PINCTRL sub-device and we need to convey this information to the driver core, otherwise it will try to claim GPIO pin that is already claimed by PINCTRL and fail the probe. Dmitry Osipenko (2): regulator: max77620: Use device_set_of_node_from_dev() regulator: max77620: Silence deferred probe error drivers/regulator/max77620-regulator.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) -- 2.30.2
s/Hisilicon/HiSilicon/. It should use capital S, according to the official website https://www.hisilicon.com/en. Signed-off-by: Hao Fang <fanghao11@huawei.com> Link: https://lore.kernel.org/r/1621679151-15617-1-git-send-email-fanghao11@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>