linux.git/drivers/regulator/Kconfig, branch v3.12

Merge remote-tracking branch 'regulator/topic/pfuze100' into regulator-next

2013-09-01T12:50:18+00:00

Merge remote-tracking branch 'regulator/topic/kconfig' into regulator-next

2013-09-01T12:50:11+00:00

Merge remote-tracking branch 'regulator/topic/da9063' into regulator-next

2013-09-01T12:50:07+00:00

regulator: lp872x: Make REGULATOR_LP872X depend on I2C rather than I2C=y

2013-08-30T15:40:26+00:00

lp872x regulator driver can be built a module after commit 631a1fc
"regulator: build: Allow most regulators to be built as modules".
Make REGULATOR_LP872X depend on I2C to allow building lp872x module when I2C=m.

Signed-off-by: Axel Lin 
Signed-off-by: Mark Brown

regulator: build: Allow most regulators to be built as modules

2013-08-29T18:45:29+00:00

Mostly for testing without bloating the kernel image rather than actual
utility.

Signed-off-by: Mark Brown

regulator: da9063: Add Dialog DA9063 voltage regulators support.

2013-08-29T18:34:59+00:00

The driver adds support for the following DA9063 PMIC regulators:
 - 11x LDOs (named LDO1 - LDO11),
 - 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),

Regulators provide following operations:
 - REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
 - REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
     - LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
     - buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
       and REGULATOR_MODE_STANDBY,
 - REGULATOR_CHANGE_CURRENT for buck converters (current limits).

The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.

Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.

This driver requires MFD core driver for operation.

Signed-off-by: Krystian Garbaciak 
Signed-off-by: Philipp Zabel 
Signed-off-by: Mark Brown

regulator: da9210: New driver

2013-08-06T16:46:15+00:00

I2C driver for the Dialog DA9210 Multi-phase 12A DC-DC Buck.

Signed-off-by: Steve Twiss 
Signed-off-by: David Dajun Chen 
Signed-off-by: Mark Brown

regulator: pfuze100: REGULATOR_PFUZE100 needs to select REGMAP_I2C

2013-07-29T05:49:56+00:00

This fixes below build errors:

  CC [M]  drivers/regulator/pfuze100-regulator.o
drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type
drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer
drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer
drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer
drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer
drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe':
drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default]
cc1: some warnings being treated as errors
make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1
make[1]: *** [drivers/regulator] Error 2
make: *** [drivers] Error 2

Signed-off-by: Axel Lin 
Signed-off-by: Mark Brown

regulator: pfuze100: add pfuze100 regulator driver

2013-07-25T09:34:34+00:00

Add pfuze100 regulator driver.

Signed-off-by: Robin Gong 
Tested-by: Steffen Trumtrar 
Signed-off-by: Mark Brown

regulator: 88pm800: Depend on MFD_88PM800 rather than MFD_88PM800=y

2013-07-19T18:08:37+00:00

This driver can be built as a module, make it depend on MFD_88PM800.
Otherwise, we are not able to select this driver when MFD_88PM800=m.

Signed-off-by: Axel Lin 
Signed-off-by: Mark Brown