The caller, ptp_kvm_init(), emits a warning if kvm_arch_ptp_init() exits
with any error which is not EOPNOTSUPP:

	"fail to initialize ptp_kvm"

Replace ENODEV with EOPNOTSUPP to avoid this spurious warning,
aligning with the ARM implementation.

Fixes: a86ed2cfa13c ("ptp: Don't print an error if ptp_kvm is not supported")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241203-kvm_ptp-eopnotsuppp-v2-1-d1d060f27aa6@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can and netfilter.

  Current release - regressions:

   - rtnetlink: fix double call of rtnl_link_get_net_ifla()

   - tcp: populate XPS related fields of timewait sockets

   - ethtool: fix access to uninitialized fields in set RXNFC command

   - selinux: use sk_to_full_sk() in selinux_ip_output()

  Current release - new code bugs:

   - net: make napi_hash_lock irq safe

   - eth:
      - bnxt_en: support header page pool in queue API
      - ice: fix NULL pointer dereference in switchdev

  Previous releases - regressions:

   - core: fix icmp host relookup triggering ip_rt_bug

   - ipv6:
      - avoid possible NULL deref in modify_prefix_route()
      - release expired exception dst cached in socket

   - smc: fix LGR and link use-after-free issue

   - hsr: avoid potential out-of-bound access in fill_frame_info()

   - can: hi311x: fix potential use-after-free

   - eth: ice: fix VLAN pruning in switchdev mode

  Previous releases - always broken:

   - netfilter:
      - ipset: hold module reference while requesting a module
      - nft_inner: incorrect percpu area handling under softirq

   - can: j1939: fix skb reference counting

   - eth:
      - mlxsw: use correct key block on Spectrum-4
      - mlx5: fix memory leak in mlx5hws_definer_calc_layout"

* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
  net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
  net: avoid potential UAF in default_operstate()
  vsock/test: verify socket options after setting them
  vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
  vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
  net/mlx5e: Remove workaround to avoid syndrome for internal port
  net/mlx5e: SD, Use correct mdev to build channel param
  net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
  net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
  net/mlx5: HWS: Properly set bwc queue locks lock classes
  net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
  bnxt_en: handle tpa_info in queue API implementation
  bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
  bnxt_en: refactor tpa_info alloc/free into helpers
  geneve: do not assume mac header is set in geneve_xmit_skb()
  mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
  ethtool: Fix wrong mod state in case of verbose and no_mask bitset
  ipmr: tune the ipmr_can_free_table() checks.
  netfilter: nft_set_hash: skip duplicated elements pending gc run
  netfilter: ipset: Hold module reference while requesting a module
  ...

The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ptp_clock_adjtime sets ptp->dialed_frequency even when adjfine
callback returns an error. This causes subsequent reads to return
an incorrect value.

Fix this by adding error check before ptp->dialed_frequency is set.

Fixes: 39a8cbd9ca05 ("ptp: remember the adjusted frequency")
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241125105954.1509971-1-ajay.kaher@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The VMCLOCK device gives support for accurate timekeeping even across
live migration, unlike the KVM PTP clock. To help ensure that users can
always use ptp_vmclock where it's available in preference to ptp_kvm,
set it to 'default PTP_1588_CLOCK_VMCLOCK' instead of 'default y'.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/89955b74d225129d6e3d79b53aa8d81d1b50560f.camel@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The check on ret has already been performed a few statements earlier
and ret has not been re-assigned and so the re-checking is redundant.
Clean up the code by removing the redundant check.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241031135042.3250614-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").

Replace these functions with pcim_iomap_region().

Additionally, pass KBUILD_MODNAME to that function, since the 'name'
parameter should indicate who (i.e., which driver) has requested the
resource.

Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patch.msgid.link/20241028095943.20498-2-pstanner@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add a small PtP driver which allows user space to get
the values of the physical and tod clock. This allows
programs like chrony to use STP as clock source and
steer the kernel clock. The physical clock can be used
as a debugging aid to get the clock without any additional
offsets like STP steering or LPAR offset.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://patch.msgid.link/20241023065601.449586-3-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The vmclock device addresses the problem of live migration with
precision clocks. The tolerances of a hardware counter (e.g. TSC) are
typically around ±50PPM. A guest will use NTP/PTP/PPS to discipline that
counter against an external source of 'real' time, and track the precise
frequency of the counter as it changes with environmental conditions.

When a guest is live migrated, anything it knows about the frequency of
the underlying counter becomes invalid. It may move from a host where
the counter running at -50PPM of its nominal frequency, to a host where
it runs at +50PPM. There will also be a step change in the value of the
counter, as the correctness of its absolute value at migration is
limited by the accuracy of the source and destination host's time
synchronization.

In its simplest form, the device merely advertises a 'disruption_marker'
which indicates that the guest should throw away any NTP synchronization
it thinks it has, and start again.

Because the shared memory region can be exposed all the way to userspace
through the /dev/vmclock0 node, applications can still use time from a
fast vDSO 'system call', and check the disruption marker to be sure that
their timestamp is indeed truthful.

The structure also allows for the precise time, as known by the host, to
be exposed directly to guests so that they don't have to wait for NTP to
resync from scratch. The PTP driver consumes this information if present.
Like the KVM PTP clock, this PTP driver can convert TSC-based cross
timestamps into KVM clock values. Unlike the KVM PTP clock, it does so
only when such is actually helpful.

The values and fields are based on the nascent virtio-rtc specification,
and the intent is that a version (hopefully precisely this version) of
this structure will be included as an optional part of that spec. In the
meantime, this driver supports the simple ACPI form of the device which
is being shipped in certain commercial hypervisors (and submitted for
inclusion in QEMU).

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h