Pull non-MM updates from Andrew Morton:

 - "hung_task: extend blocking task stacktrace dump to semaphore" from
   Lance Yang enhances the hung task detector.

   The detector presently dumps the blocking tasks's stack when it is
   blocked on a mutex. Lance's series extends this to semaphores

 - "nilfs2: improve sanity checks in dirty state propagation" from
   Wentao Liang addresses a couple of minor flaws in nilfs2

 - "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
   fixes a couple of issues in the gdb scripts

 - "Support kdump with LUKS encryption by reusing LUKS volume keys" from
   Coiby Xu addresses a usability problem with kdump.

   When the dump device is LUKS-encrypted, the kdump kernel may not have
   the keys to the encrypted filesystem. A full writeup of this is in
   the series [0/N] cover letter

 - "sysfs: add counters for lockups and stalls" from Max Kellermann adds
   /sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
   /sys/kernel/rcu_stall_count

 - "fork: Page operation cleanups in the fork code" from Pasha Tatashin
   implements a number of code cleanups in fork.c

 - "scripts/gdb/symbols: determine KASLR offset on s390 during early
   boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
   scripts

* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
  llist: make llist_add_batch() a static inline
  delayacct: remove redundant code and adjust indentation
  squashfs: add optional full compressed block caching
  crash_dump, nvme: select CONFIGFS_FS as built-in
  scripts/gdb/symbols: determine KASLR offset on s390 during early boot
  scripts/gdb/symbols: factor out pagination_off()
  scripts/gdb/symbols: factor out get_vmlinux()
  kernel/panic.c: format kernel-doc comments
  mailmap: update and consolidate Casey Connolly's name and email
  nilfs2: remove wbc->for_reclaim handling
  fork: define a local GFP_VMAP_STACK
  fork: check charging success before zeroing stack
  fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
  fork: clean-up ifdef logic around stack allocation
  kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
  kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
  x86/crash: make the page that stores the dm crypt keys inaccessible
  x86/crash: pass dm crypt keys to kdump kernel
  Revert "x86/mm: Remove unused __set_memory_prot()"
  crash_dump: retrieve dm crypt keys in kdump kernel
  ...

Pull x86 platform drivers updates from Ilpo Järvinen:
 "The changes are mostly business as usual. Besides pdx86 changes, there
  are a few power supply changes needed for related pdx86 features, move
  of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
  warning to hid-asus.

  Highlights:

   - alienware-wmi-wmax:
       - Add HWMON support
       - Add ABI and admin-guide documentation
       - Expose GPIO debug methods through debug FS
       - Support manual fan control and "custom" thermal profile

   - amd/hsmp:
       - Add sysfs files to show HSMP telemetry
       - Report power readings and limits via hwmon

   - amd/isp4: Add AMD ISP platform config for OV05C10

   - asus-wmi:
       - Refactor Ally suspend/resume to work better with older FW
       - hid-asus: check ROG Ally MCU version and warn about old FW versions

   - dasharo-acpi:
       - Add driver for Dasharo devices supporting fans and temperatures
         monitoring

   - dell-ddv:
       - Expose the battery health and manufacture date to userspace
         using power supply extensions
       - Implement the battery matching algorithm

   - dell-pc:
       - Improve error propagation
       - Use faux device

   - int3472:
       - Add delays to avoid GPIO regulator spikes
       - Add handshake pin support
       - Make regulator supply name configurable and allow registering
         more than 1 GPIO regulator
       - Map mt9m114 powerdown pin to powerenable

   - intel/pmc: Add separate SSRAM Telemetry driver

   - intel-uncore-freq: Add attributes to show agent types and die ID

   - ISST:
       - Support SST-TF revision 2 (allows more cores per bucket)
       - Support SST-PP revision 2 (fabric 1 frequencies)
       - Remove unnecessary SST MSRs restore (the package retains MSRs
         despite CPU offlining)

   - mellanox: Add support for SN2201, SN4280, SN5610, and SN5640

   - mellanox: mlxbf-pmc: Support additional PMC blocks

   - oxpec:
       - Add OneXFly variants
       - Add support for charge limit, charge thresholds, and turbo LED
       - Distinguish current X1 variants to avoid unwanted matching to
         new variants
       - Follow hwmon conventions
       - Move from hwmon/oxp-sensors to platform/x86 to match the
         enlarged scope

   - power supply:
       - Add inhibit-charge-awake (needed by oxpec)
       - Add additional battery health status values ("blown fuse" and
         "cell imbalance") (needed by dell-ddv)

   - powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog

   - thinkpad-acpi: Support camera shutter switch hotkey

   - tuxedo: Add virtual LampArray for TUXEDO NB04 devices

   - tools/power/x86/intel-speed-select:
       - Support displaying SST-PP revision 2 fields
       - Skip uncore frequency update on newer generations of CPUs

   - Miscellaneous cleanups / refactoring / improvements"

* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
  thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
  platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
  platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
  docs: ABI: Fix "aassociated" to "associated"
  platform/x86: Add AMD ISP platform config for OV05C10
  Documentation: admin-guide: pm: Add documentation for die_id
  platform/x86/intel-uncore-freq: Add attributes to show die_id
  platform/x86/intel: power-domains: Add interface to get Linux die ID
  Documentation: admin-guide: pm: Add documentation for agent_types
  platform/x86/intel-uncore-freq: Add attributes to show agent types
  platform/x86/tuxedo: Prevent invalid Kconfig state
  platform/x86: dell-ddv: Expose the battery health to userspace
  platform/x86: dell-ddv: Expose the battery manufacture date to userspace
  platform/x86: dell-ddv: Implement the battery matching algorithm
  power: supply: core: Add additional health status values
  platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
  platform/x86/amd/hsmp: Report power via hwmon sensors
  platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
  platform/mellanox: mlxreg-dpu: Fix smatch warnings
  platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
  ...

I've used several email addresses and a previous name to contribute. 
Consolidate all of these to my primary email and update my name.

Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Some batteries can signal when an internal fuse was blown. In such a
case POWER_SUPPLY_HEALTH_DEAD is too vague for userspace applications
to perform meaningful diagnostics.

Additionally some batteries can also signal when some of their
internal cells are imbalanced. In such a case returning
POWER_SUPPLY_HEALTH_UNSPEC_FAILURE is again too vague for userspace
applications to perform meaningful diagnostics.

Add new health status values for both cases.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250429003606.303870-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Use LINEAR_RANGE() instead of hand-writing it. It is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0da94193c5f8b35fa98f25a852d74b841670bd6e.1746197233.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

max8971 is written to work with or without extcon, but it fails
to link when built-in when the extcon subsystem is in a loadable
module:

x86_64-linux-ld: drivers/power/supply/max8971_charger.o: in function `max8971_probe':
max8971_charger.c:(.text+0x2ab): undefined reference to `extcon_find_edev_by_node'

Add the appropriate dependency that allows the working cases but
prevents the link failure.

Fixes: 60cd40eee4f4 ("power: supply: Add support for Maxim MAX8971 charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250503140431.438727-1-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The MAX8971 is a compact, high-frequency, high-efficiency switch-mode
charger for a one-cell lithium-ion (Li+) battery.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250430055114.11469-3-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

IIO thermal channel is in millidegree while power supply framework expects
decidegree values. Adjust scaling to get correct readings.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250430060239.12085-2-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Linux supports a couple different reset modes, but this driver here
doesn't distinguish between them and issues the same syscon register
write irrespective of the reset mode requested by the kernel.

Since DTs should not encode register writes (see e.g. [1]), update this
driver to support different reset modes based on DT compatible match.

At the same time, add support for Google GS101, which does support
cold, hard, warm, and soft.

As an example why this is useful, other than properly supporting the
Linux reboot= kernel command line option or sysfs entry, this change
allows gs101-platforms to default to a more secure cold-reset, but also
to warm-reset in case RAM contents needs to be retained across the
reset.

Link: https://lore.kernel.org/all/20250227132644.GA1924628-robh@kernel.org/ [1]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250401-syscon-reboot-reset-mode-v5-2-5b9357442363@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

On the Huawei Matebook E Go tablet the EC provides access to the adapter
and battery status. Add the driver to read power supply status on the
tablet.

This driver is inspired by the following drivers:
        drivers/power/supply/lenovo_yoga_c630_battery.c
        drivers/platform/arm64/acer-aspire1-ec.c
        drivers/acpi/battery.c
        drivers/acpi/ac.c

base-commit: 613af589b566093ce7388bf3202fca70d742c166

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250313103437.108772-1-mitltlatltl@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>