linux.git/drivers/power, branch v5.2-rc2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1

2019-05-21T09:28:39+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  51 franklin street fifth floor boston ma 02110 1301 usa

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option [no]_[pad]_[ctrl] any later version this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin street fifth floor boston ma
  02110 1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 176 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Jilayne Lovejoy 
Reviewed-by: Steve Winslow 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2019-05-16T01:50:40+00:00

Pull power supply and reset updates from Sebastian Reichel:
 "Core:
   - Add over-current health state
   - Add standard, adaptive and custom charge types
   - Add new properties for start/end charge threshold

  New Drivers / Hardware:
   - UCS1002 Programmable USB Port Power Controller
   - Ingenic JZ47xx Battery Fuel Gauge
   - AXP20x USB Power: Add AXP813 support
   - AT91 poweroff: Add SAM9X60 support
   - OLPC battery: Add XO-1.5 and XO-1.75 support

  Misc Changes:
   - syscon-reboot: support mask property
   - AXP288 fuel gauge: Blacklist ACEPC T8/T11. Looks like some vendor
     thought it's a good idea to build a desktop system with a fuel
     gauge, that slowly "discharges"...
   - cpcap-battery: Fix calculation errors
   - misc fixes"

* tag 'for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
  power: supply: olpc_battery: force the le/be casts
  power: supply: ucs1002: Fix build error without CONFIG_REGULATOR
  power: supply: ucs1002: Fix wrong return value checking
  power: supply: Add driver for Microchip UCS1002
  dt-bindings: power: supply: Add bindings for Microchip UCS1002
  power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant
  power: supply: core: fix clang -Wunsequenced
  power: supply: core: Add missing documentation for CHARGE_CONTROL_* properties
  power: supply: core: Add CHARGE_CONTROL_{START_THRESHOLD,END_THRESHOLD} properties
  power: supply: core: Add Standard, Adaptive, and Custom charge types
  power: supply: axp288_fuel_gauge: Add ACEPC T8 and T11 mini PCs to the blacklist
  power: supply: bq27xxx_battery: Notify also about status changes
  power: supply: olpc_battery: Have the framework register sysfs files for us
  power: supply: olpc_battery: Add OLPC XO 1.75 support
  power: supply: olpc_battery: Avoid using platform_info
  power: supply: olpc_battery: Use devm_power_supply_register()
  power: supply: olpc_battery: Move priv data to a struct
  power: supply: olpc_battery: Use DT to get battery version
  x86/platform/olpc: Use a correct version when making up a battery node
  x86/platform/olpc: Trivial code move in DT fixup
  ...

power: supply: olpc_battery: force the le/be casts

2019-05-14T21:17:56+00:00

The endianness of data returned from the EC depends on the particular EC
version determined at run time. Cast from little/big endian explicitey
in the routine that flips endianness to the native one to make sparse
happy.

Signed-off-by: Lubomir Rintel 
Reported-by: kbuild test robot 
Fixes: 76311b9a3295 ("power: supply: olpc_battery: Add OLPC XO 1.75 support")
Signed-off-by: Sebastian Reichel

power: supply: ucs1002: Fix build error without CONFIG_REGULATOR

2019-05-10T16:20:50+00:00

Fix gcc build error while CONFIG_REGULATOR is not set

drivers/power/supply/ucs1002_power.o: In function `ucs1002_probe':
drivers/power/supply/ucs1002_power.c:593: undefined reference to `devm_regulator_register'
drivers/power/supply/ucs1002_power.o:(.rodata+0x3b8): undefined reference to `regulator_enable_regmap'
drivers/power/supply/ucs1002_power.o:(.rodata+0x3c0): undefined reference to `regulator_disable_regmap'
drivers/power/supply/ucs1002_power.o:(.rodata+0x3c8): undefined reference to `regulator_is_enabled_regmap'

Add Kconfig dependency to CONFIG_REGULATOR.

Reported-by: Hulk Robot 
Fixes: 9a2688e42638 ("power: supply: Add driver for Microchip UCS1002")
Signed-off-by: YueHaibing 
Reviewed-by: Guenter Roeck 
Signed-off-by: Sebastian Reichel

power: supply: ucs1002: Fix wrong return value checking

2019-05-09T19:44:15+00:00

Fix wrong return value checking for devm_regulator_register and
devm_regmap_init_i2c. This looks like a copy-n-paste mistake.

Fixes: 9a2688e42638 ("power: supply: Add driver for Microchip UCS1002")
Signed-off-by: Axel Lin 
Reviewed-by: Enric Balletbo i Serra 
Reviewed-by: Andrey Smirnov 
Signed-off-by: Sebastian Reichel

power: supply: max77650: Add support for battery charger

2019-05-08T11:06:52+00:00

Add basic support for the battery charger for max77650 PMIC.

Signed-off-by: Bartosz Golaszewski 
Reviewed-by: Linus Walleij 
Reviewed-by: Sebastian Reichel 
Signed-off-by: Lee Jones

power: supply: Add driver for Microchip UCS1002

2019-05-03T20:16:08+00:00

Add driver for Microchip UCS1002 Programmable USB Port Power
Controller with Charger Emulation. The driver exposed a power supply
device to control/monitor various parameter of the device as well as a
regulator to allow controlling VBUS line.

Signed-off-by: Enric Balletbo Serra 
Signed-off-by: Andrey Smirnov 
Reviewed-by: Guenter Roeck 
Cc: Chris Healy 
Cc: Lucas Stach 
Cc: Fabio Estevam 
Cc: Guenter Roeck 
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel

power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant

2019-05-03T20:15:51+00:00

Add POWER_SUPPLY_HEALTH_OVERCURRENT constant in order to allow
singalling overcurrent condition via power supply health information.

Signed-off-by: Andrey Smirnov 
Reviewed-by: Guenter Roeck 
Cc: Enric Balletbo Serra 
Cc: Chris Healy 
Cc: Lucas Stach 
Cc: Fabio Estevam 
Cc: Guenter Roeck 
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel