Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - remove unused set_charged infrastructure
   - drop of_node from power_supply struct

  Power-supply drivers:
   - axp717: support devices without thermistors
   - bq27xxx: support max design voltage for bq270x0 and bq27x10
   - pcf50633: drop charger driver
   - max1720x: add battery health support
   - switch all power-supply devices from of_node to fwnode
   - convert regmap users to maple tree register cache
   - convert drivers to devm_kmemdup_array
   - misc cleanups and fixes

  Reset drivers:
   - at91-sama5d2_shdwc: add sama7d65 support

* tag 'for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
  power: supply: mt6370: Remove redundant 'flush_workqueue()' calls
  Revert "power: supply: bq27xxx: do not report bogus zero values"
  power: supply: max77693: Fix wrong conversion of charge input threshold value
  power: supply: pcf50633: Remove charger
  power: supply: all: switch psy_cfg from of_node to fwnode
  power: supply: core: get rid of of_node
  power: reset: at91-sama5d2_shdwc: Add sama7d65 PMC
  power: supply: smb347: convert to use maple tree register cache
  power: supply: rt9455: convert to use maple tree register cache
  power: supply: max1720x: convert to use maple tree register cache
  power: supply: ltc4162l: convert to use maple tree register cache
  power: supply: bq25980: convert to use maple tree register cache
  power: supply: bq25890: convert to use maple tree register cache
  power: supply: bq2515x: convert to use maple tree register cache
  power: supply: bq24257: convert to use maple tree register cache
  power: supply: bd99954: convert to use maple tree register cache
  power: supply: Remove unused set_charged method
  power: supply: ds2760: Remove unused ds2760_battery_set_charged
  power: supply: core: Remove unused power_supply_set_battery_charged
  power: supply: sc27xx: use devm_kmemdup_array()
  ...

The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")

See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/

Remove it.

Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-7-linux@treblig.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add driver for Maxim 77705 switch-mode charger.
It providing power supply class information to userspace.

The driver is configured through DTS (battery and system related
settings).

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-3-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

Adds initial support for the STC3117 fuel gauge.

The driver provides functionality to monitor key parameters including:
Voltage, Current, State of Charge (SOC), Temperature, Status

Co-developed-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Link: https://lore.kernel.org/r/20241220084958.32367-3-bhavin.sharma@siliconsignals.io
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Add a driver for the charger in the TWL6030/32. For now it does not report
much in sysfs but parameters are set up for USB, charging is enabled with
the specified parameters. It stops charging when full and also restarts
charging.
This prevents ending up in a system setup where you run out of battery
although a charger is plugged in after precharge completed.

Battery voltage behavior was checked via the GPADC.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20241016080314.222674-3-andreas@kemnade.info
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - new charging_orange_full_green RGB LED trigger
   - simplify and cleanup power-supply LED trigger code
   - expose power information via hwmon compatibility layer

  New hardware support:
   - enable battery support for Qualcomm Snapdragon X Elite
   - new battery driver for Maxim MAX17201/MAX17205
   - new battery driver for Lenovo Yoga C630 laptop (custom EC)

  Cleanups:
   - cleanup 'struct i2c_device_id' initializations
   - misc small battery driver cleanups and fixes"

* tag 'for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: sysfs: use power_supply_property_is_writeable()
  power: supply: qcom_battmgr: Enable battery support on x1e80100
  power: supply: add support for MAX1720x standalone fuel gauge
  dt-bindings: power: supply: add support for MAX17201/MAX17205 fuel gauge
  power: reset: piix4: add missing MODULE_DESCRIPTION() macro
  power: supply: samsung-sdi-battery: Constify struct power_supply_maintenance_charge_table
  power: supply: samsung-sdi-battery: Constify struct power_supply_vbat_ri_table
  power: supply: lenovo_yoga_c630_battery: add Lenovo C630 driver
  power: supply: ingenic: Fix some error handling paths in ingenic_battery_get_property()
  power: supply: ab8500: Clean some error messages
  power: supply: ab8500: Use iio_read_channel_processed_scale()
  power: supply: ab8500: Fix error handling when calling iio_read_channel_processed()
  power: supply: hwmon: Add support for power sensors
  power: supply: ab8500: remove unused struct 'inst_curr_result_list'
  power: supply: bd99954: remove unused struct 'battery_data'
  power: supply: leds: Add activate() callback to triggers
  power: supply: leds: Share trig pointer for online and charging_full
  power: supply: leds: Add power_supply_[un]register_led_trigger()
  power: supply: Drop explicit initialization of struct i2c_device_id::driver_data to 0

The MAX17201 monitors a single cell pack. The MAX17205 monitors and
balances a 2S or 3S pack or monitors a multiple-series cell pack. Both
devices use a I2C interface.

Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://lore.kernel.org/r/20240702090308.8848-3-dima.fedrau@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

The ChromeOS Embedded Controller implements a command to control charge
thresholds and behaviour.

Use it to implement the standard Linux charge_control_start_threshold,
charge_control_end_threshold and charge_behaviour sysfs UAPIs.

The driver is designed to be probed via the cros_ec mfd device.

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-4-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>

On the Lenovo Yoga C630 WOS laptop the EC provides access to the adapter
and battery status. Add the driver to read power supply status on the
laptop.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240621-yoga-ec-driver-v8-1-daae67d0233d@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

pm8916 LBC is a Linear Battery Charger hardware block in pm8916 PMIC.

This block implements simple CC/CV charging for Li-Po batteries.
The hardware has internal state machine to switch between modes and
works mostly autonomously, only needing the limits and targets to be
set to operate.

This driver allows setting limits and enabling the LBC block, monitoring
it's state.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230915-pm8916-bms-lbc-v3-4-f30881e951a0@trvn.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>