This patch adds battery gauge driver for Acer Iconia Tab A500 device. The battery gauge function is provided via the Embedded Controller, which is found on the Acer A500. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the LTC4162-L Li-Ion battery charger. The driver allows reading back telemetry and to set some charging options like the input current limit. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BQ256XX family of devices are highly integrated buck chargers for single cell batteries. Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the BQ25980, BQ25975 and BQ25960 family of flash chargers. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Both chips have charger and a fuel gauge. This adds basic support for displaying the state of the battery and the input power, settings are not modified. There are some defaults set via OTP. Charging also starts after plugging USB. Known issues of the fuel gauge: There are drivers in the wild which disable the fuel gauge at shutdown. If a kernel is booted without fuel gauge support, after such a driver has been used, the fuel gauge will stay off and decalibrate. If this driver is used after that, it might display wrong values for charge level. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce the bq2515x family of chargers. The BQ2515X family of devices are highly integrated battery management ICs that integrate the most common functions for wearable devices namely a charger, an output voltage rail, ADC for battery and system monitoring, and a push-button controller. Datasheets: bq25150 - http://www.ti.com/lit/ds/symlink/bq25150.pdf bq25155 - http://www.ti.com/lit/ds/symlink/bq25155.pdf Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This merges the MP2629 battery charge management immutable branch between MFD, IIO and power-supply due for the v5.8 merge window into power-supply for-next branch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The mp2629 provides switching-mode battery charge management for single-cell Li-ion or Li-polymer battery. Driver supports the access/control input source and battery charging parameters. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion secondary battery intended to be used in space-constraint equipment such as Low profile Notebook PC, Tablets and other applications. BD99954 provides a Dual-source Battery Charger, two port BC1.2 detection and a Battery Monitor. Support ROHM BD99954 Charger IC. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This patch adds a driver for the CellWise cw2015 fuel gauge. The CellWise cw2015 is a shuntless, single-cell Li-Ion fuel gauge used in the pine64 Pinebook Pro laptop and some Raspberry Pi UPS HATs. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>