linux.git/drivers/pmdomain, branch vsnprintf

Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

2024-12-06T19:24:00+00:00

Pull pmdomain fixes from Ulf Hansson:
 "Core:
   - Fix a couple of memory-leaks during genpd init/remove

  Providers:
   - imx: Adjust delay for gpcv2 to fix power up handshake
   - mediatek: Fix DT bindings by adding another nested power-domain
     layer"

* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: imx: gpcv2: Adjust delay after power up handshake
  pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
  pmdomain: core: Add missing put_device()
  dt-bindings: power: mediatek: Add another nested power-domain layer

pmdomain: imx: gpcv2: Adjust delay after power up handshake

2024-12-02T16:09:26+00:00

The udelay(5) is not enough, sometimes below kernel panic
still be triggered:

[    4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt
[    4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1
[    4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)
[    4.012985] Call trace:
[...]
[    4.013029]  arm64_serror_panic+0x64/0x70
[    4.013034]  do_serror+0x3c/0x70
[    4.013039]  el1h_64_error_handler+0x30/0x54
[    4.013046]  el1h_64_error+0x64/0x68
[    4.013050]  clk_imx8mp_audiomix_runtime_resume+0x38/0x48
[    4.013059]  __genpd_runtime_resume+0x30/0x80
[    4.013066]  genpd_runtime_resume+0x114/0x29c
[    4.013073]  __rpm_callback+0x48/0x1e0
[    4.013079]  rpm_callback+0x68/0x80
[    4.013084]  rpm_resume+0x3bc/0x6a0
[    4.013089]  __pm_runtime_resume+0x50/0x9c
[    4.013095]  pm_runtime_get_suppliers+0x60/0x8c
[    4.013101]  __driver_probe_device+0x4c/0x14c
[    4.013108]  driver_probe_device+0x3c/0x120
[    4.013114]  __driver_attach+0xc4/0x200
[    4.013119]  bus_for_each_dev+0x7c/0xe0
[    4.013125]  driver_attach+0x24/0x30
[    4.013130]  bus_add_driver+0x110/0x240
[    4.013135]  driver_register+0x68/0x124
[    4.013142]  __platform_driver_register+0x24/0x30
[    4.013149]  sdma_driver_init+0x20/0x1000 [imx_sdma]
[    4.013163]  do_one_initcall+0x60/0x1e0
[    4.013168]  do_init_module+0x5c/0x21c
[    4.013175]  load_module+0x1a98/0x205c
[    4.013181]  init_module_from_file+0x88/0xd4
[    4.013187]  __arm64_sys_finit_module+0x258/0x350
[    4.013194]  invoke_syscall.constprop.0+0x50/0xe0
[    4.013202]  do_el0_svc+0xa8/0xe0
[    4.013208]  el0_svc+0x3c/0x140
[    4.013215]  el0t_64_sync_handler+0x120/0x12c
[    4.013222]  el0t_64_sync+0x190/0x194
[    4.013228] SMP: stopping secondary CPUs

The correct way is to wait handshake, but it needs BUS clock of
BLK-CTL be enabled, which is in separate driver. So delay is the
only option here. The udelay(10) is a data got by experiment.

Fixes: e8dc41afca16 ("pmdomain: imx: gpcv2: Add delay after power up handshake")
Reported-by: Francesco Dolcini 
Closes: https://lore.kernel.org/lkml/20241007132555.GA53279@francesco-nb/
Signed-off-by: Shengjiu Wang 
Cc: stable@vger.kernel.org
Message-ID: <20241121075231.3910922-1-shengjiu.wang@nxp.com>
Signed-off-by: Ulf Hansson

pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails

2024-12-02T16:06:09+00:00

When the ida allocation fails we need to free up the previously allocated
memory before returning the error code. Let's fix this and while at it,
let's also move the ida allocation to genpd_alloc_data() and the freeing to
genpd_free_data(), as it better belongs there.

Fixes: 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag")
Signed-off-by: Ulf Hansson 
Message-ID: <20241122134207.157283-3-ulf.hansson@linaro.org>

pmdomain: core: Add missing put_device()

2024-12-02T16:06:09+00:00

When removing a genpd we don't clean up the genpd->dev correctly. Let's add
the missing put_device() in genpd_free_data() to fix this.

Fixes: 401ea1572de9 ("PM / Domain: Add struct device to genpd")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson 
Message-ID: <20241122134207.157283-2-ulf.hansson@linaro.org>

Get rid of 'remove_new' relic from platform driver struct

2024-12-01T23:12:43+00:00

The continual trickle of small conversion patches is grating on me, and
is really not helping.  Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:

  /*
   * .remove_new() is a relic from a prototype conversion of .remove().
   * New drivers are supposed to implement .remove(). Once all drivers are
   * converted to not use .remove_new any more, it will be dropped.
   */

This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.

I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.

Then I just removed the old (sic) .remove_new member function, and this
is the end result.  No more unnecessary conversion noise.

Signed-off-by: Linus Torvalds

pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750

2024-11-12T18:46:51+00:00

This adds the RPMHPD present in SM8750 SoCs.

Signed-off-by: Jishnu Prakash 
Signed-off-by: Taniya Das 
Signed-off-by: Melody Olvera 
Message-ID: <20241112002444.2802092-3-quic_molvera@quicinc.com>
Signed-off-by: Ulf Hansson

pmdomain: imx: Use of_property_present() for non-boolean properties

2024-11-12T18:46:51+00:00

The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.

Signed-off-by: Rob Herring (Arm) 
Message-ID: <20241104190742.276710-1-robh@kernel.org>
Signed-off-by: Ulf Hansson

pmdomain: Merge branch fixes into next

2024-11-01T11:56:48+00:00

Merge the pmdomain fixes for v6.12-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.13.

Signed-off-by: Ulf Hansson

pmdomain: imx93-blk-ctrl: correct remove path

2024-11-01T11:53:16+00:00

The check condition should be 'i < bc->onecell_data.num_domains', not
'bc->onecell_data.num_domains' which will make the look never finish
and cause kernel panic.

Also disable runtime to address
"imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!"

Fixes: e9aa77d413c9 ("soc: imx: add i.MX93 media blk ctrl driver")
Signed-off-by: Peng Fan 
Reviewed-by: Stefan Wahren 
Cc: stable@vger.kernel.org
Message-ID: <20241101101252.1448466-1-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson

pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()

2024-10-31T10:41:20+00:00

The patch standardizes the probe() code by replacing the two occurrences
of dev_err() with dev_err_probe(). Indeed, dev_err_probe() was used in all
other error paths of the probe() function.
Note that dev_err_probe() has advantages even if the error code is not
EPROBE_DEFER, such as the symbolic output of the error code. Therefore,
it should generally be preferred over dev_err().

Co-developed-by: Michael Trimarchi 
Signed-off-by: Michael Trimarchi 
Signed-off-by: Dario Binacchi 
Reviewed-by: Marco Felsch 
Message-ID: <20241025160430.4113467-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Ulf Hansson