Pull chrome platform updates from Benson Leung:
 "cros_ec_typec:

   - A series from Prashant for Type-C to implement TYPEC_STATUS,
     parsing USB PD Partner ID VDOs, and registering partner altmodes.

  cros_ec misc:

   - Don't treat RTC events as wakeup sources in cros_ec_proto"

* tag 'tag-chrome-platform-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_typec: Tolerate unrecognized mux flags
  platform/chrome: cros_ec_typec: Register partner altmodes
  platform/chrome: cros_ec_typec: Parse partner PD ID VDOs
  platform/chrome: cros_ec_typec: Introduce TYPEC_STATUS
  platform/chrome: cros_ec: Import Type C host commands
  platform/chrome: cros_ec_typec: Clear partner identity on device removal
  platform/chrome: cros_ec_typec: Fix remove partner logic
  platform/chrome: cros_ec_typec: Relocate set_port_params_v*() functions
  platform/chrome: Don't treat RTC events as wakeup sources

Pull thermal updates from Daniel Lezcano:

 - Add upper and lower limits clamps for the cooling device state in the
   power allocator governor (Michael Kao)

 - Add upper and lower limits support for the power allocator governor
   (Lukasz Luba)

 - Optimize conditions testing for the trip points (Bernard Zhao)

 - Replace spin_lock_irqsave by spin_lock in hard IRQ on the rcar driver
   (Tian Tao)

 - Add MT8516 dt-bindings and device reset optional support (Fabien
   Parent)

 - Add a quiescent period to cool down the PCH when entering S0iX
   (Sumeet Pawnikar)

 - Use bitmap API instead of re-inventing the wheel on sun8i (Yangtao
   Li)

 - Remove useless NULL check in the hwmon driver (Bernard Zhao)

 - Update the current state in the cpufreq cooling device only if the
   frequency change is effective (Zhuguangqing)

 - Improve the schema validation for the rcar DT bindings (Geert
   Uytterhoeven)

 - Fix the user time unit in the documentation (Viresh Kumar)

 - Add PCI ids for Lewisburg PCH (Andres Freund)

 - Add hwmon support on amlogic (Martin Blumenstingl)

 - Fix build failure for PCH entering on in S0iX (Randy Dunlap)

 - Improve the k_* coefficient for the power allocator governor (Lukasz
   Luba)

 - Fix missing const on a sysfs attribute (Rikard Falkeborn)

 - Remove broken interrupt support on rcar to be replaced by a new one
   (Niklas Söderlund)

 - Improve the error code handling at init time on imx8mm (Fabio
   Estevam)

 - Compute interval validity once instead at each temperature reading
   iteration on acerhdf (Daniel Lezcano)

 - Add r8a779a0 support (Niklas Söderlund)

 - Add PCI ids for AlderLake PCH and mmio refactoring (Srinivas
   Pandruvada)

 - Add RFIM and mailbox support on int340x (Srinivas Pandruvada)

 - Use macro for temperature calculation on PCH (Sumeet Pawnikar)

 - Simplify return conditions at probe time on Broadcom (Zheng Yongjun)

 - Fix workload name on PCH (Srinivas Pandruvada)

 - Migrate the devfreq cooling device code to the energy model API
   (Lukasz Luba)

 - Emit a warning if the thermal_zone_device_update is called without
   the .get_temp() ops (Daniel Lezcano)

 - Add critical and hot ops for the thermal zone (Daniel Lezcano)

 - Remove notification usage when critical is reached on rcar (Daniel
   Lezcano)

 - Fix devfreq build when ENERGY_MODEL is not set (Lukasz Luba)

* tag 'thermal-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
  thermal/drivers/devfreq_cooling: Fix the build when !ENERGY_MODEL
  thermal/drivers/rcar: Remove notification usage
  thermal/core: Add critical and hot ops
  thermal/core: Emit a warning if the thermal zone is updated without ops
  drm/panfrost: Register devfreq cooling and attempt to add Energy Model
  thermal: devfreq_cooling: remove old power model and use EM
  thermal: devfreq_cooling: add new registration functions with Energy Model
  thermal: devfreq_cooling: use a copy of device status
  thermal: devfreq_cooling: change tracing function and arguments
  thermal: int340x: processor_thermal: Correct workload type name
  thermal: broadcom: simplify the return expression of bcm2711_thermal_probe()
  thermal: intel: pch: use macro for temperature calculation
  thermal: int340x: processor_thermal: Add mailbox driver
  thermal: int340x: processor_thermal: Add RFIM driver
  thermal: int340x: processor_thermal: Add AlderLake PCI device id
  thermal: int340x: processor_thermal: Refactor MMIO interface
  thermal: rcar_gen3_thermal: Add r8a779a0 support
  dt-bindings: thermal: rcar-gen3-thermal: Add r8a779a0 support
  platform/x86/drivers/acerhdf: Check the interval value when it is set
  platform/x86/drivers/acerhdf: Use module_param_cb to set/get polling interval
  ...

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - New driver for changing BIOS settings from within Linux on Dell
     devices. This introduces a new generic sysfs API for this. Lenovo
     is working on also supporting this API on their devices

   - New Intel PMT telemetry and crashlog drivers

   - Support for SW_TABLET_MODE reporting for the acer-wmi and intel-hid
     drivers

   - Preparation work for improving support for Microsoft Surface
     hardware

   - Various fixes / improvements / quirks for the panasonic-laptop and
     others"

* tag 'platform-drivers-x86-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (81 commits)
  platform/x86: ISST: Mark mmio_range_devid_0 and mmio_range_devid_1 with static keyword
  platform/x86: intel-hid: add Rocket Lake ACPI device ID
  x86/platform: classmate-laptop: add WiFi media button
  platform/x86: mlx-platform: Fix item counter assignment for MSN2700/ComEx system
  platform/x86: mlx-platform: Fix item counter assignment for MSN2700, MSN24xx systems
  tools/power/x86/intel-speed-select: Update version for v5.11
  tools/power/x86/intel-speed-select: Account for missing sysfs for die_id
  tools/power/x86/intel-speed-select: Read TRL from mailbox
  platform/x86: intel-hid: Do not create SW_TABLET_MODE input-dev when a KIOX010A ACPI dev is present
  platform/x86: intel-hid: Add alternative method to enable switches
  platform/x86: intel-hid: Add support for SW_TABLET_MODE
  platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on some HP x360 models
  platform/x86: ISST: Change PCI device macros
  platform/x86: ISST: Allow configurable offset range
  platform/x86: ISST: Check for unaligned mmio address
  acer-wireless: send an EV_SYN/SYN_REPORT between state changes
  platform/x86: dell-wmi-sysman: work around for BIOS bug
  platform/x86: mlx-platform: remove an unused variable
  platform/x86: thinkpad_acpi: remove trailing semicolon in macro definition
  platform/x86: dell-smbios-base: Fix error return code in dell_smbios_init
  ...

Pull spi updates from Mark Brown:
 "The big change this release has been some excellent work from Lukas
  Wunner which closes a bunch of holes in the cleanup paths for drivers,
  mainly introduced as a result of devm conversions causing bad
  interactions with the support SPI has for allocating the bus and
  driver data together.

  Together with some of the other work done it feels like we've turned
  the corner on several long standing pain points with the API.

  Summary:

   - Many cleanups around probe/remove and error handling from Lukas
     Wunner and Uwe Kleine-König, and further fixes around PM from Zhang
     Qilong.

   - Provide a mask for which bits of the mode can safely be configured
     by drivers and use that to fix an issue with the ADS7846 driver.

   - Documentation of the expected interactions between SPI and GPIO
     level chip select polarity configuration from H. Nikolaus Schaller,
     hopefully we're pretty much at the end of sorting out the
     interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus
     Walleij for this.

   - DMA support for Allwinner sun6i controllers.

   - Support for Canaan K210 Designware implementations and Intel Adler
     Lake"

* tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
  spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors
  spi: Limit the spi device max speed to controller's max speed
  spi: spi-geni-qcom: Use the new method of gpio CS control
  platform/chrome: cros_ec_spi: Drop bits_per_word assignment
  platform/chrome: cros_ec_spi: Don't overwrite spi::mode
  spi: dw: Add support for the Canaan K210 SoC SPI
  spi: dw: Add support for 32-bits max xfer size
  dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller
  spi: Update DT binding docs to support SiFive FU740 SoC
  spi: atmel-quadspi: Fix use-after-free on unbind
  spi: npcm-fiu: Disable clock in probe error path
  spi: ar934x: Don't leak SPI master in probe error path
  spi: mt7621: Don't leak SPI master in probe error path
  spi: mt7621: Disable clock in probe error path
  media: netup_unidvb: Don't leak SPI master in probe error path
  spi: sc18is602: Don't leak SPI master in probe error path
  spi: rb4xx: Don't leak SPI master in probe error path
  spi: gpio: Don't leak SPI master in probe error path
  spi: spi-mtk-nor: Don't leak SPI master in probe error path
  spi: mxic: Don't leak SPI master in probe error path
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big USB and thunderbolt pull request for 5.11-rc1.

  Nothing major in here, just the grind of constant development to
  support new hardware and fix old issues:

   - thunderbolt updates for new USB4 hardware

   - cdns3 major driver updates

   - lots of typec updates and additions as more hardware is available

   - usb serial driver updates and fixes

   - other tiny USB driver updates

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
  usb: phy: convert comma to semicolon
  usb: ucsi: convert comma to semicolon
  usb: typec: tcpm: convert comma to semicolon
  usb: typec: tcpm: Update vbus_vsafe0v on init
  usb: typec: tcpci: Enable bleed discharge when auto discharge is enabled
  usb: typec: Add class for plug alt mode device
  USB: typec: tcpci: Add Bleed discharge to POWER_CONTROL definition
  USB: typec: tcpm: Add a 30ms room for tPSSourceOn in PR_SWAP
  USB: typec: tcpm: Fix PR_SWAP error handling
  USB: typec: tcpm: Hard Reset after not receiving a Request
  USB: gadget: f_fs: remove likely/unlikely
  usb: gadget: f_fs: Re-use SS descriptors for SuperSpeedPlus
  USB: gadget: f_midi: setup SuperSpeed Plus descriptors
  USB: gadget: f_acm: add support for SuperSpeed Plus
  USB: gadget: f_rndis: fix bitrate for SuperSpeed and above
  usb: typec: intel_pmc_mux: Configure cable generation value for USB4
  MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER
  usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()
  usb: chipidea: usbmisc_imx: Use of_device_get_match_data()
  usb: cdns3: fix NULL pointer dereference on no platform data
  ...

Pull x86 platform updates from Borislav Petkov:

 - add a new uv_sysfs driver and expose read-only information from UV
   BIOS (Justin Ernst and Mike Travis)

 - the usual set of small fixes

* tag 'x86_platform_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Update sysfs documentation
  x86/platform/uv: Add deprecated messages to /proc info leaves
  x86/platform/uv: Add sysfs hubless leaves
  x86/platform/uv: Add sysfs leaves to replace those in procfs
  x86/platform/uv: Add kernel interfaces for obtaining system info
  x86/platform/uv: Make uv_pcibus_kset and uv_hubs_kset static
  x86/platform/uv: Fix an error code in uv_hubs_init()
  x86/platform/uv: Update MAINTAINERS for uv_sysfs driver
  x86/platform/uv: Update ABI documentation of /sys/firmware/sgi_uv/
  x86/platform/uv: Add new uv_sysfs platform driver
  x86/platform/uv: Add and export uv_bios_* functions
  x86/platform/uv: Remove existing /sys/firmware/sgi_uv/ interface

On occasion, the Chrome Embedded Controller (EC) can send a mux
configuration which doesn't map to a particular data mode. For instance,
dedicated Type C chargers, when connected, may cause only
USB_PD_MUX_POLARITY_INVERTED to be set. This is a valid flag combination
and should not lead to a driver abort.

Modify the mux configuration handling to not return an error when an
unrecognized mux flag combination is encountered. Concordantly, make the
ensuing print a debug level print so as to not pollute the kernel logs.

Cc: Keith Short <keithshort@chromium.org>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201106020305.767202-1-pmalani@chromium.org

This is already handed by default in spi_setup() if the bits_per_word is
0, so just drop it to shave off a line.

Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-3-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.

Fixes: a17d94f0b6e1 ("mfd: Add ChromeOS EC SPI driver")
Cc: Simon Glass <sjg@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20201204193540.3047030-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Fix the following sparse warnings:

drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c:23:24: warning: symbol 'mmio_range_devid_0' was not declared. Should it be static?
drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c:28:24: warning: symbol 'mmio_range_devid_1' was not declared. Should it be static?

Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1607430489-116200-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>