Pull pin control updates from Linus Walleij:
 "We have some patches to DTS[I] files in arm and arm64 as well, that
  were merged here as DT headers were being changed.

  The most interesting stuff is the Intel Tangier chip support and
  AMLogic C3 in my opinion.

  No core changes this time.

  Drivers:

   - Intel Tangier SoC pin control support

   - AMLogic C3 SoC pin control support

   - Texas Instruments AM654 SoC pin control support

   - Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
     control support

   - Qualcomm PMX75 and PM7550BA (Power Management) pin control support

   - Qualcomm PMC8180 and PMC8180C (Power Management) pin control
     support

   - DROP the Oxnas driver as there is not enough of community interest
     to keep carrying this ARM(11) port

  Enhancements:

   - Bias control in the MT7986 pin control driver

   - Misc device tree binding enhancements such as the Broadcom 11351
     being converted to YAML

   - New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use

   - Clean up some SPDX headers

   - Handle non-unique devicetree subnode names in two Renesas drivers"

* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl: mlxbf3: Remove gpio_disable_free()
  pinctrl: use capital "OR" for multiple licenses in SPDX
  dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
  pinctrl: cherryview: fix address_space_handler() argument
  pinctrl: intel: consolidate ACPI dependency
  pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
  pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
  pinctrl: mediatek: assign functions to configure pin bias on MT7986
  pinctrl: mediatek: fix pull_type data for MT7981
  dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
  dt-bindings: pinctrl: Drop 'phandle' properties
  pinctrl: lynxpoint: Make use of pm_ptr()
  pinctrl: baytrail: Make use of pm_ptr()
  pinctrl: intel: Switch to use exported namespace
  pinctrl: lynxpoint: reuse common functions from pinctrl-intel
  pinctrl: cherryview: reuse common functions from pinctrl-intel
  ...

Pull spi updates from Mark Brown:
 "There's been quite a lot of generic activity here, but more
  administrative than featuers. We also have a bunch of new drivers,
  including one that's part of a MFD so we pulled in the core parts of
  that:

   - Lots of work from both Yang Yingliang and Andy Shevchenko on moving
     to host/device/controller based terminology for devices.

   - QuadSPI SPI support for Allwinner sun6i.

   - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
     QuPv3 and StarFive JH7110 QSPI"

* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
  spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
  spi: spi-sn-f-ospi: switch to use modern name
  spi: sifive: switch to use modern name
  spi: sh: switch to use modern name
  spi: sh-sci: switch to use modern name
  spi: sh-msiof: switch to use modern name
  spi: sh-hspi: switch to use modern name
  spi: sc18is602: switch to use modern name
  spi: s3c64xx: switch to use modern name
  spi: rzv2m-csi: switch to use devm_spi_alloc_host()
  spi: rspi: switch to use spi_alloc_host()
  spi: rockchip: switch to use modern name
  spi: rockchip-sfc: switch to use modern name
  spi: realtek-rtl: switch to use devm_spi_alloc_host()
  spi: rb4xx: switch to use modern name
  spi: qup: switch to use modern name
  spi: spi-qcom-qspi: switch to use modern name
  spi: pxa2xx: switch to use modern name
  spi: ppc4xx: switch to use modern name
  spi: spl022: switch to use modern name
  ...

intel-pinctrl for v6.6-1

* New library driver for Intel MID to deduplicate code (Raag Jadav)
* Reuse common functions from pinctrl-intel to reduce the code (Raag Jadav)
* Move most of the exported functions to the PINCTRL_INTEL namespace
* Make use of pm_ptr() in Bay Trail and Lynxpoint drivers
* Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper and use it in a few drivers
* Consolidata ACPI dependency in Kconfig (Raag Jadav)
* Fix address_space_handler() argument in Cherryview driver (Raag Jadav)
* Optinmize byt_pin_config_set() to avoid IO in error cases (Raag Jadav)

The following is an automated git shortlog grouped by driver:

at91:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

baytrail:
 -  Make use of pm_ptr()
 -  reuse common functions from pinctrl-intel
 -  consolidate common mask operation

cherryview:
 -  fix address_space_handler() argument
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
 -  reuse common functions from pinctrl-intel

intel:
 -  consolidate ACPI dependency
 -  Switch to use exported namespace
 -  export common pinctrl functions

lynxpoint:
 -  Make use of pm_ptr()
 -  reuse common functions from pinctrl-intel

Merge patch series:
 - Merge patch series "Introduce Intel Tangier pinctrl driver"
 - Merge patch series "Reuse common functions from pinctrl-intel"

merrifield:
 -  Adapt to Intel Tangier driver

moorefield:
 -  Adapt to Intel Tangier driver

mvebu:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

pm:
 -  Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper

renesas:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

tangier:
 -  Introduce Intel Tangier driver

tegra:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Remove support for gpio_disable_free() because it is called when the libgpiod
command "gpioset" is invoked. This gives the GPIO control back to hardware which
cancels out the effort to set the GPIO value.

Reminder of the code flow to change a GPIO value from software:
1) All GPIOs are controlled by hardware by default
2) To change the GPIO value, enable software control via a mux.
3) Once software has control over the GPIO pin, the gpio-mlxbf3 driver
   will be able to change the direction and value of the GPIO.

When the user runs "gpioset gpiochip0 0=0" for example, the gpio
pin value should change from 1 to 0. In this case, mlxbf3_gpio_request_enable()
is called via gpiochip_generic_request(). The latter switches GPIO control from
hardware to software. Then the GPIO value is changed from 1 to 0. However,
gpio_disable_free() is also called which changes control back to hardware
which changes the GPIO value back to 1.

Fixes: d11f932808dc ("pinctrl: mlxbf3: Add pinctrl driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230818164314.8505-2-asmaa@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR".  Correct it
to keep consistent format and avoid copy-paste issues.

Correct also the placement of SPDX identifier in pinctrl-meson-axg
files:

  WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823085546.116494-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

First argument of acpi_*_address_space_handler() APIs is acpi_handle of
the device, which is incorrectly passed in driver ->remove() path here.
Fix it by passing the appropriate argument and while at it, make both
API calls consistent using ACPI_HANDLE().

Fixes: a0b028597d59 ("pinctrl: cherryview: Add support for GMMR GPIO opregion")
Cc: stable@vger.kernel.org
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since all the Intel specific platform drivers depend on ACPI, we can
consolidate their config dependency.

Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.

With that, make sure the PM ops are used only in CONFIG_PM_SLEEP=y
case by wrapping them in pm_sleep_ptr() macro.

Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230717172821.62827-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230717172821.62827-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20230717172821.62827-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>