linux.git/drivers/pinctrl, branch v6.16-rc2 Linux kernel source tree pinctrl: sunxi: dt: Consider pin base when calculating bank number from pin 2025-06-10T12:35:40+00:00 Chen-Yu Tsai wens@csie.org 2025-06-07T13:52:03+00:00 5558f27a58459a4038ebb23bcb5bd40c1e345c57 In prepare_function_table() when the pinctrl function table IRQ entries are generated, the pin bank is calculated from the absolute pin number; however the IRQ bank mux array is indexed from the first pin bank of the controller. For R_PIO controllers, this means the absolute pin bank is way off from the relative pin bank used for array indexing. Correct this by taking into account the pin base of the controller. Fixes: f5e2cd34b12f ("pinctrl: sunxi: allow reading mux values from DT") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/20250607135203.2085226-1-wens@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
In prepare_function_table() when the pinctrl function table IRQ entries
are generated, the pin bank is calculated from the absolute pin number;
however the IRQ bank mux array is indexed from the first pin bank of the
controller. For R_PIO controllers, this means the absolute pin bank is
way off from the relative pin bank used for array indexing.

Correct this by taking into account the pin base of the controller.

Fixes: f5e2cd34b12f ("pinctrl: sunxi: allow reading mux values from DT")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/20250607135203.2085226-1-wens@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: tb10x: Drop of_match_ptr for ID table 2025-06-09T08:16:46+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-06-01T10:51:01+00:00 24b0277c1c539cd41539d9297baafc62df04464a The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF warning: pinctrl-tb10x.c:815:34: warning: unused variable 'tb10x_pinctrl_dt_ids' [-Wunused-const-variable] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202505301317.EI1caRC0-lkp@intel.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250601105100.27927-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).  This
also fixes !CONFIG_OF warning:

  pinctrl-tb10x.c:815:34: warning: unused variable 'tb10x_pinctrl_dt_ids' [-Wunused-const-variable]

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505301317.EI1caRC0-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20250601105100.27927-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: st: Drop unused st_gpio_bank() function 2025-06-09T08:16:45+00:00 Krzysztof Kozlowski krzysztof.kozlowski@linaro.org 2025-05-28T09:22:02+00:00 fcd65d65fd85dbde090ef8c2615760ebc5ccf9e3 Static inline st_gpio_bank() function is not referenced: pinctrl-st.c:377:19: error: unused function 'st_gpio_bank' [-Werror,-Wunused-function] Fixes: 701016c0cba5 ("pinctrl: st: Add pinctrl and pinconf support.") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/20250528092201.52132-2-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Static inline st_gpio_bank() function is not referenced:

  pinctrl-st.c:377:19: error: unused function 'st_gpio_bank' [-Werror,-Wunused-function]

Fixes: 701016c0cba5 ("pinctrl: st: Add pinctrl and pinconf support.")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20250528092201.52132-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: qcom: pinctrl-qcm2290: Add missing pins 2025-06-09T08:16:45+00:00 Wojciech Slenska wojciech.slenska@gmail.com 2025-05-23T10:14:37+00:00 315345610faee8a0568b522dba9e35067d1732ab Added the missing pins to the qcm2290_pins table. Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com> Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Added the missing pins to the qcm2290_pins table.

Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Fixes: 48e049ef1238 ("pinctrl: qcom: Add QCM2290 pinctrl driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250523101437.59092-1-wojciech.slenska@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: qcom: switch to devm_gpiochip_add_data() 2025-06-09T08:16:45+00:00 Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com 2025-05-13T18:38:59+00:00 56ec63a6e107e724619e61c7e605b49d365dfa07 In order to simplify cleanup actions, use devres-enabled version of gpiochip_add_data(). As the msm_pinctrl_remove() function is now empty, drop it and all its calls from the corresponding pinctrl drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-3-249999af0fc1@oss.qualcomm.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
In order to simplify cleanup actions, use devres-enabled version of
gpiochip_add_data().  As the msm_pinctrl_remove() function is now empty,
drop it and all its calls from the corresponding pinctrl drivers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-3-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2025-05-30T16:46:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-30T16:46:28+00:00 eafd95ea74846eda3e3eac6b2bb7f34619d8a6f8 Pull pin control updates from Linus Walleij: "An especially linear and sparse improvement and new drivers release. Nothing exciting. The biggest change in Bartosz changes to make gpiochip set/get calls return error codes (something we should have fixed ages ago but is now finally getting fixed.) Core changes: - Add the devres devm_pinctrl_register_mappings() call that can register some pin control machine mappings and have them go away with the associated device New drivers: - Support for the Mediatek MT6893 and MT8196 SoCs - Support for the Renesas RZ/V2N SoC - Support for the NXP Freescale i.MX943 SoC Improvements: - Per-SoC suspend/resume callbacks in the Samsung drivers - Set all pins as input (High-Z) at probe in the MCP23S08 driver - Switch most GPIO chips to use the setters/getters with a return value - EGPIO support in the Qualcomm QCM2290 driver - Fix up the number of available GPIO lines in Qualcomm QCS8300 and QCS615" * tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: freescale: Add support for imx943 pinctrl pinctrl: core: add devm_pinctrl_register_mappings() pinctrl: remove extern specifier for functions in machine.h pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms pinctrl: freescale: Enable driver if platform is enabled. pinctrl: freescale: Depend imx-scu driver on OF pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction() pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get() pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output() pinctrl: armada-37xx: set GPIO output value before setting direction pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31 pinctrl: meson: Drop unused aml_pctl_find_group_by_name() pinctrl: at91: Fix possible out-of-boundary access pinctrl: add stubs for OF-specific pinconf functions pinctrl: qcom: correct the ngpios entry for QCS8300 pinctrl: qcom: correct the ngpios entry for QCS615 dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300 dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615 ... 
Pull pin control updates from Linus Walleij:
 "An especially linear and sparse improvement and new drivers release.
  Nothing exciting. The biggest change in Bartosz changes to make
  gpiochip set/get calls return error codes (something we should have
  fixed ages ago but is now finally getting fixed.)

  Core changes:

   - Add the devres devm_pinctrl_register_mappings() call that can
     register some pin control machine mappings and have them go away
     with the associated device

  New drivers:

   - Support for the Mediatek MT6893 and MT8196 SoCs

   - Support for the Renesas RZ/V2N SoC

   - Support for the NXP Freescale i.MX943 SoC

  Improvements:

   - Per-SoC suspend/resume callbacks in the Samsung drivers

   - Set all pins as input (High-Z) at probe in the MCP23S08 driver

   - Switch most GPIO chips to use the setters/getters with a return
     value

   - EGPIO support in the Qualcomm QCM2290 driver

   - Fix up the number of available GPIO lines in Qualcomm QCS8300 and
     QCS615"

* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: freescale: Add support for imx943 pinctrl
  pinctrl: core: add devm_pinctrl_register_mappings()
  pinctrl: remove extern specifier for functions in machine.h
  pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
  pinctrl: freescale: Enable driver if platform is enabled.
  pinctrl: freescale: Depend imx-scu driver on OF
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
  pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
  pinctrl: armada-37xx: set GPIO output value before setting direction
  pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
  pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
  pinctrl: at91: Fix possible out-of-boundary access
  pinctrl: add stubs for OF-specific pinconf functions
  pinctrl: qcom: correct the ngpios entry for QCS8300
  pinctrl: qcom: correct the ngpios entry for QCS615
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
  dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
  ...
Merge tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2025-05-27T23:32:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-27T23:32:30+00:00 3702a515edec515fcc7e085053da636fefac88d6 Pull ACPI updates from Rafael Wysocki: "The most significant part of these changes is an ACPICA update covering two upstream ACPICA releases, 20241212 and 20250404, that have not been included into the kernel code base yet. Among other things, it adds definitions needed to address GCC 15's -Wunterminated-string-initialization warnings, adds support for three new tables (MRRM, ERDT, RIMT), extends support for two tables (RAS2, DMAR), and fixes some issues. On top of the above, there is a new parser for the MRRM table, more changes related to GCC 15's -Wunterminated-string-initialization warnings, a CPPC library update including functions related to autonomous CPU performance state selection, a couple of new quirks, some assorted fixes and some code cleanups. Specifics: - Fix two ACPICA SLAB cache leaks (Seunghun Han) - Add EINJv2 get error type action and define Error Injection Actions in hex values to avoid inconsistencies between the specification and the code (Zaid Alali) - Fix typo in comments for SRAT structures (Adam Lackorzynski) - Prevent possible loss of data in ACPICA because of u32 to u8 conversions (Saket Dumbre) - Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin) - Add support for printing AML arguments when the ACPICA debug level is ACPI_LV_TRACE_POINT (Mario Limonciello) - Drop a stale comment about the file content from actbl2.h (Sudeep Holla) - Apply pack(1) to union aml_resource (Tamir Duberstein) - Fix overflow check in the ACPICA version of vsnprintf() (gldrk) - Interpret SIDP structures in DMAR added revision 3.4 of the VT-d specification (Alexey Neyman) - Add typedef and other definitions related to MRRM to ACPICA (Tony Luck) - Add definitions for RIMT to ACPICA (Sunil V L) - Fix spelling mistake "Incremement" -> "Increment" in the ACPICA utilities code (Colin Ian King) - Add typedef and other definitions for ERDT to ACPICA (Tony Luck) - Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem) - Rename structure and field names of the RAS2 table in actbl2.h (Shiju Jose) - Fix up whitespace in acpica/utcache.c (Zhe Qiao) - Avoid sequence overread in a call to strncmp() in ap_get_table_length() and replace strncpy() with memcpy() in ACPICA in some places (Ahmed Salem) - Update copyright year in all ACPICA files (Saket Dumbre) - Add __nonstring annotations for unterminated strings in the static ACPI tables parsing code (Kees Cook) - Add support for parsing the MRRM ACPI table and sysfs files to describe memory regions listed in it (Tony Luck, Anil Keshavamurthy) - Remove an (explicitly) unused header file include from the VIOT ACPI table parser file (Andy Shevchenko) - Improve logging around acpi_initialize_tables() (Bartosz Szczepanek) - Clean up the initialization of CPU data structures in the ACPI processor driver (Zhang Rui) - Remove an obsolete comment regarding the C-states handling in the ACPI processor driver (Giovanni Gherdovich) - Simplify PCC shared memory region handling (Sudeep Holla) - Rework and extend functions for reading CPPC register values and for updating CPPC registers (Lifeng Zheng) - Add three functions related to autonomous CPU performance state selection to the CPPC library (Lifeng Zheng) - Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into a const pointer (Pei Xiao) - Round battery capacity percengate in the ACPI battery driver to the closest integer to avoid user confusion (shitao) - Make the ACPI battery driver report the current as a negative number to the power supply framework when the battery is discharging as documented (Peter Marheine) - Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[] list to prevent spurious wakeups from suspend-to-idle (Werner Sembach) - Convert the APEI EINJ driver to a faux device one (Sudeep Holla, Jon Hunter) - Remove redundant calls to einj_get_available_error_type() from the APEI EINJ driver (Zaid Alali) - Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong Bai) - Add an LPS0 check() callback to the AMD pinctrl driver and fix up config symbol dependencies in it (Mario Limonciello, Rafael Wysocki) - Avoid initializing the ACPI platform profile driver on non-ACPI platforms (Alexandre Ghiti) - Document that references to ACPI data (non-device) nodes should use string-only references in hierarchical data node packages (Sakari Ailus) - Fail the ACPI bus registration if acpi_kobj registration fails (Armin Wolf)" * tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) ACPI: MRRM: Fix default max memory region ACPI: bus: Bail out if acpi_kobj registration fails ACPI: platform_profile: Avoid initializing on non-ACPI platforms pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset ACPI: tables: Improve logging around acpi_initialize_tables() ACPI: VIOT: Remove (explicitly) unused header ACPI: Add documentation for exposing MRRM data ACPI: MRRM: Add /sys files to describe memory ranges ACPI: MRRM: Minimal parse of ACPI MRRM table ACPICA: Update copyright year ACPICA: Logfile: Changes for version 20250404 ACPICA: Replace strncpy() with memcpy() ACPICA: Apply ACPI_NONSTRING in more places ACPICA: Avoid sequence overread in call to strncmp() ACPICA: Adjust the position of code lines ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table ACPICA: Apply ACPI_NONSTRING ACPICA: Introduce ACPI_NONSTRING ACPICA: actbl2.h: ERDT: Add typedef and other definitions ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name ... 
Pull ACPI updates from Rafael Wysocki:
 "The most significant part of these changes is an ACPICA update
  covering two upstream ACPICA releases, 20241212 and 20250404, that
  have not been included into the kernel code base yet.

  Among other things, it adds definitions needed to address GCC 15's
  -Wunterminated-string-initialization warnings, adds support for three
  new tables (MRRM, ERDT, RIMT), extends support for two tables (RAS2,
  DMAR), and fixes some issues.

  On top of the above, there is a new parser for the MRRM table, more
  changes related to GCC 15's -Wunterminated-string-initialization
  warnings, a CPPC library update including functions related to
  autonomous CPU performance state selection, a couple of new quirks,
  some assorted fixes and some code cleanups.

  Specifics:

   - Fix two ACPICA SLAB cache leaks (Seunghun Han)

   - Add EINJv2 get error type action and define Error Injection Actions
     in hex values to avoid inconsistencies between the specification
     and the code (Zaid Alali)

   - Fix typo in comments for SRAT structures (Adam Lackorzynski)

   - Prevent possible loss of data in ACPICA because of u32 to u8
     conversions (Saket Dumbre)

   - Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin)

   - Add support for printing AML arguments when the ACPICA debug level
     is ACPI_LV_TRACE_POINT (Mario Limonciello)

   - Drop a stale comment about the file content from actbl2.h (Sudeep
     Holla)

   - Apply pack(1) to union aml_resource (Tamir Duberstein)

   - Fix overflow check in the ACPICA version of vsnprintf() (gldrk)

   - Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
     specification (Alexey Neyman)

   - Add typedef and other definitions related to MRRM to ACPICA (Tony
     Luck)

   - Add definitions for RIMT to ACPICA (Sunil V L)

   - Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
     utilities code (Colin Ian King)

   - Add typedef and other definitions for ERDT to ACPICA (Tony Luck)

   - Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem)

   - Rename structure and field names of the RAS2 table in actbl2.h
     (Shiju Jose)

   - Fix up whitespace in acpica/utcache.c (Zhe Qiao)

   - Avoid sequence overread in a call to strncmp() in
     ap_get_table_length() and replace strncpy() with memcpy() in ACPICA
     in some places (Ahmed Salem)

   - Update copyright year in all ACPICA files (Saket Dumbre)

   - Add __nonstring annotations for unterminated strings in the static
     ACPI tables parsing code (Kees Cook)

   - Add support for parsing the MRRM ACPI table and sysfs files to
     describe memory regions listed in it (Tony Luck, Anil
     Keshavamurthy)

   - Remove an (explicitly) unused header file include from the VIOT
     ACPI table parser file (Andy Shevchenko)

   - Improve logging around acpi_initialize_tables() (Bartosz
     Szczepanek)

   - Clean up the initialization of CPU data structures in the ACPI
     processor driver (Zhang Rui)

   - Remove an obsolete comment regarding the C-states handling in the
     ACPI processor driver (Giovanni Gherdovich)

   - Simplify PCC shared memory region handling (Sudeep Holla)

   - Rework and extend functions for reading CPPC register values and
     for updating CPPC registers (Lifeng Zheng)

   - Add three functions related to autonomous CPU performance state
     selection to the CPPC library (Lifeng Zheng)

   - Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into
     a const pointer (Pei Xiao)

   - Round battery capacity percengate in the ACPI battery driver to the
     closest integer to avoid user confusion (shitao)

   - Make the ACPI battery driver report the current as a negative
     number to the power supply framework when the battery is
     discharging as documented (Peter Marheine)

   - Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
     list to prevent spurious wakeups from suspend-to-idle (Werner
     Sembach)

   - Convert the APEI EINJ driver to a faux device one (Sudeep Holla,
     Jon Hunter)

   - Remove redundant calls to einj_get_available_error_type() from the
     APEI EINJ driver (Zaid Alali)

   - Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
     Bai)

   - Add an LPS0 check() callback to the AMD pinctrl driver and fix up
     config symbol dependencies in it (Mario Limonciello, Rafael
     Wysocki)

   - Avoid initializing the ACPI platform profile driver on non-ACPI
     platforms (Alexandre Ghiti)

   - Document that references to ACPI data (non-device) nodes should use
     string-only references in hierarchical data node packages (Sakari
     Ailus)

   - Fail the ACPI bus registration if acpi_kobj registration fails
     (Armin Wolf)"

* tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
  ACPI: MRRM: Fix default max memory region
  ACPI: bus: Bail out if acpi_kobj registration fails
  ACPI: platform_profile: Avoid initializing on non-ACPI platforms
  pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
  ACPI: tables: Improve logging around acpi_initialize_tables()
  ACPI: VIOT: Remove (explicitly) unused header
  ACPI: Add documentation for exposing MRRM data
  ACPI: MRRM: Add /sys files to describe memory ranges
  ACPI: MRRM: Minimal parse of ACPI MRRM table
  ACPICA: Update copyright year
  ACPICA: Logfile: Changes for version 20250404
  ACPICA: Replace strncpy() with memcpy()
  ACPICA: Apply ACPI_NONSTRING in more places
  ACPICA: Avoid sequence overread in call to strncmp()
  ACPICA: Adjust the position of code lines
  ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
  ACPICA: Apply ACPI_NONSTRING
  ACPICA: Introduce ACPI_NONSTRING
  ACPICA: actbl2.h: ERDT: Add typedef and other definitions
  ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
  ...
Merge tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2025-05-27T15:07:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-27T15:07:32+00:00 2bd1bea5fa6aa79bc563a57919730eb809651b28 Pull irq cleanups from Thomas Gleixner: "A set of cleanups for the generic interrupt subsystem: - Consolidate on one set of functions for the interrupt domain code to get rid of pointlessly duplicated code with only marginal different semantics. - Update the documentation accordingly and consolidate the coding style of the irqdomain header" * tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) irqdomain: Consolidate coding style irqdomain: Fix kernel-doc and add it to Documentation Documentation: irqdomain: Update it Documentation: irq-domain.rst: Simple improvements Documentation: irq/concepts: Minor improvements Documentation: irq/concepts: Add commas and reflow irqdomain: Improve kernel-docs of functions irqdomain: Make struct irq_domain_info variables const irqdomain: Use irq_domain_instantiate()'s return value as initializers irqdomain: Drop irq_linear_revmap() pinctrl: keembay: Switch to irq_find_mapping() irqchip/armada-370-xp: Switch to irq_find_mapping() gpu: ipu-v3: Switch to irq_find_mapping() gpio: idt3243x: Switch to irq_find_mapping() sh: Switch to irq_find_mapping() powerpc: Switch to irq_find_mapping() irqdomain: Drop irq_domain_add_*() functions powerpc: Switch irq_domain_add_nomap() to use fwnode thermal: Switch to irq_domain_create_linear() soc: Switch to irq_domain_create_*() ... 
Pull irq cleanups from Thomas Gleixner:
 "A set of cleanups for the generic interrupt subsystem:

   - Consolidate on one set of functions for the interrupt domain code
     to get rid of pointlessly duplicated code with only marginal
     different semantics.

   - Update the documentation accordingly and consolidate the coding
     style of the irqdomain header"

* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  irqdomain: Consolidate coding style
  irqdomain: Fix kernel-doc and add it to Documentation
  Documentation: irqdomain: Update it
  Documentation: irq-domain.rst: Simple improvements
  Documentation: irq/concepts: Minor improvements
  Documentation: irq/concepts: Add commas and reflow
  irqdomain: Improve kernel-docs of functions
  irqdomain: Make struct irq_domain_info variables const
  irqdomain: Use irq_domain_instantiate()'s return value as initializers
  irqdomain: Drop irq_linear_revmap()
  pinctrl: keembay: Switch to irq_find_mapping()
  irqchip/armada-370-xp: Switch to irq_find_mapping()
  gpu: ipu-v3: Switch to irq_find_mapping()
  gpio: idt3243x: Switch to irq_find_mapping()
  sh: Switch to irq_find_mapping()
  powerpc: Switch to irq_find_mapping()
  irqdomain: Drop irq_domain_add_*() functions
  powerpc: Switch irq_domain_add_nomap() to use fwnode
  thermal: Switch to irq_domain_create_linear()
  soc: Switch to irq_domain_create_*()
  ...
Merge branches 'acpi-resource', 'acpi-pm', 'acpi-platform-profile' and 'acpi-docs' 2025-05-26T17:42:29+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2025-05-26T17:42:29+00:00 db0e4d5429c909db9c252be59bd872ab628c78c6 Merge an ACPI resources management update, ACPI power management updates, an ACPI platform profile driver fix and an ACPI documentation update related to device properties for 6.16-rc1: - Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong Bai). - Add an LPS0 check() callback to the AMD pinctrl driver and fix up config symbol dependencies in it (Mario Limonciello, Rafael Wysocki). - Avoid initializing the ACPI platform profile driver on non-ACPI platforms (Alexandre Ghiti). - Document that references to ACPI data (non-device) nodes should use string-only references in hierarchical data node packages (Sakari Ailus). * acpi-resource: ACPI: resource: fix a typo for MECHREVO in irq1_edge_low_force_override[] * acpi-pm: pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops' pinctrl: amd: Add an LPS0 check() callback ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case * acpi-platform-profile: ACPI: platform_profile: Avoid initializing on non-ACPI platforms * acpi-docs: Documentation: ACPI: Use all-string data node references 
Merge an ACPI resources management update, ACPI power management
updates, an ACPI platform profile driver fix and an ACPI documentation
update related to device properties for 6.16-rc1:

 - Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
   Bai).

 - Add an LPS0 check() callback to the AMD pinctrl driver and fix up
   config symbol dependencies in it (Mario Limonciello, Rafael Wysocki).

 - Avoid initializing the ACPI platform profile driver on non-ACPI
   platforms (Alexandre Ghiti).

 - Document that references to ACPI data (non-device) nodes should use
   string-only references in hierarchical data node packages (Sakari
   Ailus).

* acpi-resource:
  ACPI: resource: fix a typo for MECHREVO in irq1_edge_low_force_override[]

* acpi-pm:
  pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
  pinctrl: amd: Fix use of undeclared identifier 'pinctrl_amd_s2idle_dev_ops'
  pinctrl: amd: Add an LPS0 check() callback
  ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case

* acpi-platform-profile:
  ACPI: platform_profile: Avoid initializing on non-ACPI platforms

* acpi-docs:
  Documentation: ACPI: Use all-string data node references
pinctrl: freescale: Add support for imx943 pinctrl 2025-05-21T08:12:14+00:00 Jacky Bai ping.bai@nxp.com 2025-05-16T10:04:23+00:00 08dcbe30be481bc66eb5ee1e82a577d64e451612 The i.MX943 System Manager (SM) firmware supports the System Control Management Interface (SCMI) pinctrl protocol, similar to the i.MX95 SM. The base offset for the i.MX943 IOMUXC Daisy input register differs from that of the i.MX95. Update the pinctrl-imx-scmi driver to add support for i.MX943. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20250516100423.1685732-1-ping.bai@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The i.MX943 System Manager (SM) firmware supports the System Control
Management Interface (SCMI) pinctrl protocol, similar to the i.MX95 SM.
The base offset for the i.MX943 IOMUXC Daisy input register differs from
that of the i.MX95. Update the pinctrl-imx-scmi driver to add support for
i.MX943.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250516100423.1685732-1-ping.bai@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>