Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for X-Powers AXP717 PMIC to AXP22X
   - Add support for Rockchip RK816 PMIC to RK8XX
   - Add support for TI TPS65224 PMIC to TPS6594

  New Functionality:
   - Add Power Off functionality to Rohm BD71828
   - Allow I2C SMBus access in Renesas RSMU

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Shift Intel support over to MSI interrupts
   - Generify adding platform data away from being ACPI specific
   - Use device core supplied attribute to register sysfs entries
   - Replace hand-rolled functionality with generic APIs
   - Utilise centrally provided helpers and macros
   - Clean-up error handling
   - Remove superfluous/duplicated/unused sections
   - Trivial; spelling, whitespace, coding-style adaptions
   - More Maple Tree conversions"

* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
  dt-bindings: mfd: Use full path to other schemas
  mfd: rsmu: support I2C SMBus access
  dt-bindings: mfd: Convert lp873x.txt to json-schema
  dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
  dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
  mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
  mfd: kempld: Remove custom DMI matching code
  mfd: cs42l43: Update patching revision check
  dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
  mfd: timberdale: Remove redundant assignment to variable err
  dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
  mfd: axp20x: Convert to use Maple Tree register cache
  mfd: bd71828: Remove commented code lines
  mfd: intel-m10-bmc: Change staging size to a variable
  dt-bindings: mfd: Add ROHM BD71879
  mfd: Tidy Kconfig dependency's parentheses
  mfd: ocelot-spi: Use spi_sync_transfer()
  dt-bindings: mfd: syscon: Add missing simple syscon compatibles
  ...

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries

  New drivers:

   - Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support

  Improvements:

   - Serious cleanup of the recently merged aw9523 driver

   - Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single

   - A slew of device tree binding cleanups

   - Support a bus clock in the Samsung driver"

* tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: bcm2835: Make pin freeing behavior configurable
  dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108
  pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs
  dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function
  dt-bindings: pinctrl: mediatek: mt7622: fix array properties
  pinctrl: samsung: drop redundant drvdata assignment
  pinctrl: samsung: support a bus clock
  dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces
  pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function
  pinctrl: renesas: r8a779h0: Fix IRQ suffixes
  pinctrl: renesas: rzg2l: Remove extra space in function parameter
  dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901
  pinctrl: pinconf-generic: print hex value
  pinctrl: realtek: fix module autoloading
  pinctrl: qcom: sm7150: fix module autoloading
  pinctrl: loongson2: fix module autoloading
  pinctrl: mediatek: fix module autoloading
  pinctrl: freescale: imx8ulp: fix module autoloading
  dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes
  ...

Pull gpio updates from Bartosz Golaszewski
 "This was a quiet release cycle for the GPIO tree and so this
  pull-request is relatively small.

  We have one new driver, some minor improvements to the GPIO core code
  and across several drivers, some DT and documentation updates but in
  general nothing stands out or is controversial. All changes have spent
  time in next with no reported issues (or ones that were quickly
  fixed).

  GPIO core:
   - remove more unused legacy interfaces (after converting the last
     remaining users to better alternatives)
   - update kerneldocs
   - improve error handling and log messages in GPIO ACPI code
   - remove dead code (always true checks) from GPIOLIB

  New drivers:
   - add a driver for Intel Granite Rapids-D vGPIO

  Driver improvements:
   - use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
   - provide an ID table for gpio-cros-ec to avoid a driver name
     fallback check
   - add support for gpio-ranges for GPIO drivers supporting multiple
     GPIO banks
   - switch to using dynamic GPIO base in gpio-brcmstb
   - fix irq handling in gpio-npcm-sgpio
   - switch to memory mapped IO accessors in gpio-sch

  DT bindings:
   - add support for gpio-ranges to gpio-brcmstb
   - add support for a new model and the gpio-line-names property to
     gpio-mpfs

  Documentation:
   - replace leading tabs with spaces in code blocks
   - fix typos"

* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
  gpio: nuvoton: Fix sgpio irq handle error
  gpiolib: Discourage to use formatting strings in line names
  gpio: brcmstb: add support for gpio-ranges
  gpio: of: support gpio-ranges for multiple gpiochip devices
  dt-bindings: gpio: brcmstb: add gpio-ranges
  gpio: Add Intel Granite Rapids-D vGPIO driver
  gpio: brcmstb: Use dynamic GPIO base numbers
  gpiolib: acpi: Set label for IRQ only lines
  gpiolib: acpi: Add fwnode name to the GPIO interrupt label
  gpiolib: Get rid of never false gpio_is_valid() calls
  gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
  gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
  gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
  gpiolib: acpi: Extract __acpi_find_gpio() helper
  gpio: sch: Utilise temporary variable for struct device
  gpio: sch: Switch to memory mapped IO accessors
  gpio: regmap: Use -ENOTSUPP consistently
  gpio: pcie-idio-24: Use -ENOTSUPP consistently
  Documentation: gpio: Replace leading TABs by spaces in code blocks
  gpiolib: acpi: Check for errors first in acpi_find_gpio()
  ...

Pull SoC driver updates from Arnd Bergmann:
 "As usual, these are updates for drivers that are specific to certain
  SoCs or firmware running on them.

  Notable updates include

   - The new STMicroelectronics STM32 "firewall" bus driver that is used
     to provide a barrier between different parts of an SoC

   - Lots of updates for the Qualcomm platform drivers, in particular
     SCM, which gets a rewrite of its initialization code

   - Firmware driver updates for Arm FF-A notification interrupts and
     indirect messaging, SCMI firmware support for pin control and
     vendor specific interfaces, and TEE firmware interface changes
     across multiple TEE drivers

   - A larger cleanup of the Mediatek CMDQ driver and some related bits

   - Kconfig changes for riscv drivers to prepare for adding Kanaan k230
     support

   - Multiple minor updates for the TI sysc bus driver, memory
     controllers, hisilicon hccs and more"

* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
  firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
  soc: qcom: pmic_glink: Make client-lock non-sleeping
  dt-bindings: soc: qcom,wcnss: fix bluetooth address example
  soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
  bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
  bus: etzpc: introduce ETZPC firewall controller driver
  firmware: arm_ffa: Avoid queuing work when running on the worker queue
  bus: ti-sysc: Drop legacy idle quirk handling
  bus: ti-sysc: Drop legacy quirk handling for smartreflex
  bus: ti-sysc: Drop legacy quirk handling for uarts
  bus: ti-sysc: Add a description and copyrights
  bus: ti-sysc: Move check for no-reset-on-init
  soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
  soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
  firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
  bus: rifsc: introduce RIFSC firewall controller driver
  of: property: fw_devlink: Add support for "access-controller"
  soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
  soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
  soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
  ...

RISC-V SoC Kconfig Updates for v6.10

A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.

The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  riscv: config: enable ARCH_CANAAN in defconfig
  RISC-V: drop SOC_VIRT for ARCH_VIRT
  RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
  RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
  RISC-V: Drop unused SOC_CANAAN
  reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
  pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
  clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
  soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
  riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210

Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

intel-gpio for v6.10-1

* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors

The following is an automated git shortlog grouped by driver:

Add Intel Granite Rapids-D vGPIO driver:
 - Add Intel Granite Rapids-D vGPIO driver

crystalcove:
 -  Use -ENOTSUPP consistently

gpiolib:
 -  acpi: Set label for IRQ only lines
 -  acpi: Add fwnode name to the GPIO interrupt label
 -  acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
 -  acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
 -  acpi: Simplify error handling in __acpi_find_gpio()
 -  acpi: Extract __acpi_find_gpio() helper
 -  acpi: Check for errors first in acpi_find_gpio()
 -  acpi: Remove never true check in acpi_get_gpiod_by_index()

sch:
 -  Utilise temporary variable for struct device
 -  Switch to memory mapped IO accessors

wcove:
 -  Use -ENOTSUPP consistently

Samsung pinctrl drivers changes for v6.10

1. Add support for toggling bus clock (PCLK) for any pin controller
   register accesses.  This looks needed on newer Samsung chips, like
   Google GS101 and probably Exynos850.
2. Drop old, deprecated in v6.1 bindings header with register constants.
   The constants were moved to DTS headers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN.
So in case it was configured as GPIO_OUT before the configured output
level also get lost. As long as GPIO sysfs was used this wasn't
actually a problem because the pins and their possible output level
were kept by sysfs.

Since more and more Raspberry Pi users start using libgpiod they are
confused about this behavior. So make the pin freeing behavior of
GPIO_OUT configurable via module parameter. In case
pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is
kept.

This patch based on the downstream work of Phil Elwell.

Link: https://github.com/raspberrypi/linux/pull/6117
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20240503062745.11298-1-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for TPS65224 pinctrl and GPIOs to TPS6594 driver as they have
significant functional overlap.
TPS65224 PMIC has 6 GPIOS which can be configured as GPIO or other
dedicated device functions.

Signed-off-by: Nirmala Devi Mal Nadar <m.nirmaladevi@ltts.com>
Signed-off-by: Bhargav Raviprakash <bhargav.r@ltts.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/0109018f2fdce15d-c13bd809-a11b-4202-9b7f-c9380d51b070-000000@ap-south-1.amazonses.com
Signed-off-by: Lee Jones <lee@kernel.org>