linux.git/drivers/pinctrl, branch v3.17-rc2 Linux kernel source tree Merge tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2014-08-08T18:34:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-08-08T18:34:32+00:00 10c8e0562057b5d64ea170feab148e1550420030 Pull ARM SoC driver changes from Olof Johansson: "A handful of driver-related changes. We've had a bunch of them going in through other branches as well, so it's only a part of what we really have this release. Larger pieces are: - Removal of a now unused PWM driver for atmel [ This includes AVR32 changes that have been appropriately acked ] - Performance counter support for the arm CCN interconnect - OMAP mailbox driver cleanups and consolidation - PCI and SATA PHY drivers for SPEAr 13xx platforms - Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to better model regulators/power" Note: this merge also fixes up the semantic conflict with the new calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy: core: Let node ptr of PHY point to PHY and not of PHY provider") that came in through Greg's USB tree. Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through the next tree. * tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: arm-ccn: Fix error handling at event allocation mailbox/omap: add a parent structure for every IP instance mailbox/omap: remove the private mailbox structure mailbox/omap: consolidate OMAP mailbox driver mailbox/omap: simplify the fifo assignment by using macros mailbox/omap: remove omap_mbox_type_t from mailbox ops mailbox/omap: remove OMAP1 mailbox driver mailbox/omap: use devm_* interfaces bus: ARM CCN: add PERF_EVENTS dependency bus: ARM CCN PMU driver PCI: spear: Remove spear13xx_pcie_remove() PCI: spear: Fix Section mismatch compilation warning for probe() ARM: tegra: Remove legacy PCIe power supply properties PCI: tegra: Remove deprecated power supply properties PCI: tegra: Implement accurate power supply scheme ARM: SPEAr13xx: Update defconfigs ARM: SPEAr13xx: Add pcie and miphy DT nodes ARM: SPEAr13xx: Add bindings and dt node for misc block ARM: SPEAr13xx: Fix static mapping table phy: Add drivers for PCIe and SATA phy on SPEAr13xx ... 
Pull ARM SoC driver changes from Olof Johansson:
 "A handful of driver-related changes.  We've had a bunch of them going
  in through other branches as well, so it's only a part of what we
  really have this release.

  Larger pieces are:

   - Removal of a now unused PWM driver for atmel
     [ This includes AVR32 changes that have been appropriately acked ]
   - Performance counter support for the arm CCN interconnect
   - OMAP mailbox driver cleanups and consolidation
   - PCI and SATA PHY drivers for SPEAr 13xx platforms
   - Redefinition (with backwards compatibility!) of PCI DT bindings for
     Tegra to better model regulators/power"

Note: this merge also fixes up the semantic conflict with the new
calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy:
core: Let node ptr of PHY point to PHY and not of PHY provider") that
came in through Greg's USB tree.

Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through
the next tree.

* tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: arm-ccn: Fix error handling at event allocation
  mailbox/omap: add a parent structure for every IP instance
  mailbox/omap: remove the private mailbox structure
  mailbox/omap: consolidate OMAP mailbox driver
  mailbox/omap: simplify the fifo assignment by using macros
  mailbox/omap: remove omap_mbox_type_t from mailbox ops
  mailbox/omap: remove OMAP1 mailbox driver
  mailbox/omap: use devm_* interfaces
  bus: ARM CCN: add PERF_EVENTS dependency
  bus: ARM CCN PMU driver
  PCI: spear: Remove spear13xx_pcie_remove()
  PCI: spear: Fix Section mismatch compilation warning for probe()
  ARM: tegra: Remove legacy PCIe power supply properties
  PCI: tegra: Remove deprecated power supply properties
  PCI: tegra: Implement accurate power supply scheme
  ARM: SPEAr13xx: Update defconfigs
  ARM: SPEAr13xx: Add pcie and miphy DT nodes
  ARM: SPEAr13xx: Add bindings and dt node for misc block
  ARM: SPEAr13xx: Fix static mapping table
  phy: Add drivers for PCIe and SATA phy on SPEAr13xx
  ...
Merge tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2014-08-08T18:16:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-08-08T18:16:58+00:00 d4e1f5a14e17d4f0e8034c0967511884bcb12fba Pull ARM SoC device-tree changes from Olof Johansson: "Unlike the board branch, this keeps having large sets of changes for every release, but that's quite expected and is so far working well. Most of this is plumbing for various device bindings and new platforms, but there's also a bit of cleanup and code removal for things that are moved from platform code to DT contents (some OMAP clock code in particular). There's also a pinctrl driver for tegra here (appropriately acked), that's introduced this way to make it more bisectable. I'm happy to say that there were no conflicts at all with this branch this release, which means that changes are flowing through our tree as expected instead of merged through driver maintainers (or at least not done with conflicts). There are several new boards added, and a couple of SoCs. In no particular order: - Rockchip RK3288 SoC support, including DTS for a dev board that they have seeded with some community developers. - Better support for Hardkernel Exynos4-based ODROID boards. - CCF conversions (and dtsi contents) for several Renesas platforms. - Gumstix Pepper (TI AM335x) board support - TI eval board support for AM437x - Allwinner A23 SoC, very similar to existing ones which mostly has resulted in DT changes for support. Also includes support for an Ippo tablet with the chipset. - Allwinner A31 Hummingbird board support, not to be confused with the SolidRun i.MX-based Hummingboard. - Tegra30 Apalis board support" * tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits) ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb ARM: tegra: apalis t30: fix device tree compatible node ARM: tegra: paz00: Fix some indentation inconsistencies ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ... 
Pull ARM SoC device-tree changes from Olof Johansson:
 "Unlike the board branch, this keeps having large sets of changes for
  every release, but that's quite expected and is so far working well.

  Most of this is plumbing for various device bindings and new
  platforms, but there's also a bit of cleanup and code removal for
  things that are moved from platform code to DT contents (some OMAP
  clock code in particular).

  There's also a pinctrl driver for tegra here (appropriately acked),
  that's introduced this way to make it more bisectable.

  I'm happy to say that there were no conflicts at all with this branch
  this release, which means that changes are flowing through our tree as
  expected instead of merged through driver maintainers (or at least not
  done with conflicts).

  There are several new boards added, and a couple of SoCs.  In no
  particular order:

   - Rockchip RK3288 SoC support, including DTS for a dev board that
     they have seeded with some community developers.
   - Better support for Hardkernel Exynos4-based ODROID boards.
   - CCF conversions (and dtsi contents) for several Renesas platforms.
   - Gumstix Pepper (TI AM335x) board support
   - TI eval board support for AM437x
   - Allwinner A23 SoC, very similar to existing ones which mostly has
     resulted in DT changes for support.  Also includes support for an
     Ippo tablet with the chipset.
   - Allwinner A31 Hummingbird board support, not to be confused with
     the SolidRun i.MX-based Hummingboard.
   - Tegra30 Apalis board support"

* tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits)
  ARM: dts: Enable USB host0 (EHCI) on rk3288-evb
  ARM: dts: add rk3288 ehci usb devices
  ARM: dts: Turn on USB host vbus on rk3288-evb
  ARM: tegra: apalis t30: fix device tree compatible node
  ARM: tegra: paz00: Fix some indentation inconsistencies
  ARM: zynq: DT: Clarify Xilinx Zynq platform
  ARM: dts: rockchip: add watchdog node
  ARM: dts: rockchip: remove pinctrl setting from radxarock uart2
  ARM: dts: Add missing pinctrl for uart0/1 for exynos3250
  ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250
  ARM: dts: Add TMU dt node to monitor the temperature for exynos3250
  ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250
  ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only
  ARM: dts: max77686 is exynos5250-snow only
  ARM: zynq: DT: Remove DMA from board DTs
  ARM: zynq: DT: Add CAN node
  ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table
  ARM: dts: Add PMU DT node for exynos5260 SoC
  ARM: EXYNOS: Add support for Exynos5410 PMU
  ARM: dts: Add PMU to exynos5410
  ...
Merge tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2014-08-08T00:20:53+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-08-08T00:20:53+00:00 e0b8b78651350e8dcf9cc60a959ccbcfc5bc3061 Pull pinctrl updates from Linus Walleij: "This is the bulk pin control changes for the v3.17 merge development cycle: - get rid of the .disable() callback from the driver callback vtable. This callback was abused and counterintuitive since a pin or group of pins can be said to always be in some setting, and never really disabled. We now only enable a certain muxing, and move between some certain muxings, we never "disable" a mux setting - some janitorial moving the MSM, Samsung and Nomadik and drivers to their own subdirectories for a clearer view in the subsystem. This will continue - kill off the use of the return value from gpiochip_remove(), this will be done in parallel in the GPIO subsystem and hopefully not trigger too many unchecked return value warnings before we get rid of this altogether - a huge set of changes and improvements to the Allwinner sunxi drivers especially for their latest A23 and A31 SoCs, and some ground work for the new sun8i platform family - a large set of Rockchip driver improvements adding support for the RK3288 SoC - advances in migration of older Freescale platforms to pin control, especially i.MX1 - Samsung and Exynos improvements - support for the Qualcomm MSM8960 SoC - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail drivers - a bunch of nice janitorial work done with cppcheck" * tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits) pinctrl: baytrail: Convert to use gpiolib irqchip pinctrl: sunxi: number gpio ranges starting from 0 pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ pinctrl: rockchip: add drive-strength control for rk3288 pinctrl: rockchip: add separate type for rk3288 pinctrl: rockchip: set is_generic in pinconf_ops pinctrl: msm: drop negativity check on unsigned value pinctrl: remove all usage of gpio_remove ret val in driver/pinctl pinctrl: qcom: Make muxing of gpio function explicit pinctrl: nomadik: move all Nomadik drivers to subdir pinctrl: samsung: Group all drivers in a sub-dir sh-pfc: sh73a0: Introduce the use of devm_regulator_register sh-pfc: Add renesas,pfc-r8a7791 to binding documentation pinctrl: msm: move all qualcomm drivers to subdir pinctrl: msm: Add msm8960 definitions pinctrl: samsung: Allow pin value to be initialized using pinfunc pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs pinctrl: samsung: Handle GPIO request and free using pinctrl helpers pinctrl: samsung: Decouple direction setting from pinctrl ... 
Pull pinctrl updates from Linus Walleij:
 "This is the bulk pin control changes for the v3.17 merge development
  cycle:

   - get rid of the .disable() callback from the driver callback vtable.

     This callback was abused and counterintuitive since a pin or group
     of pins can be said to always be in some setting, and never really
     disabled.  We now only enable a certain muxing, and move between
     some certain muxings, we never "disable" a mux setting

   - some janitorial moving the MSM, Samsung and Nomadik and drivers to
     their own subdirectories for a clearer view in the subsystem.  This
     will continue

   - kill off the use of the return value from gpiochip_remove(), this
     will be done in parallel in the GPIO subsystem and hopefully not
     trigger too many unchecked return value warnings before we get rid
     of this altogether

   - a huge set of changes and improvements to the Allwinner sunxi
     drivers especially for their latest A23 and A31 SoCs, and some
     ground work for the new sun8i platform family

   - a large set of Rockchip driver improvements adding support for the
     RK3288 SoC

   - advances in migration of older Freescale platforms to pin control,
     especially i.MX1

   - Samsung and Exynos improvements

   - support for the Qualcomm MSM8960 SoC

   - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail
     drivers

   - a bunch of nice janitorial work done with cppcheck"

* tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits)
  pinctrl: baytrail: Convert to use gpiolib irqchip
  pinctrl: sunxi: number gpio ranges starting from 0
  pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
  pinctrl: rockchip: add drive-strength control for rk3288
  pinctrl: rockchip: add separate type for rk3288
  pinctrl: rockchip: set is_generic in pinconf_ops
  pinctrl: msm: drop negativity check on unsigned value
  pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
  pinctrl: qcom: Make muxing of gpio function explicit
  pinctrl: nomadik: move all Nomadik drivers to subdir
  pinctrl: samsung: Group all drivers in a sub-dir
  sh-pfc: sh73a0: Introduce the use of devm_regulator_register
  sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
  pinctrl: msm: move all qualcomm drivers to subdir
  pinctrl: msm: Add msm8960 definitions
  pinctrl: samsung: Allow pin value to be initialized using pinfunc
  pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
  pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
  pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
  pinctrl: samsung: Decouple direction setting from pinctrl
  ...
pinctrl: baytrail: Convert to use gpiolib irqchip 2014-07-28T10:21:00+00:00 Mika Westerberg mika.westerberg@linux.intel.com 2014-07-25T06:54:47+00:00 e1ee5c578fb1fa24b7ccaf1a11237a2bd70b6f9a Instead of open-coding irqchip handling in the driver we can take advantage of the new irqchip helpers provided by the gpiolib core. While doing this we also make sure that we call gpiochip_irqchip_add() after the gpiochip itself is registered as required. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Instead of open-coding irqchip handling in the driver we can take advantage
of the new irqchip helpers provided by the gpiolib core.

While doing this we also make sure that we call gpiochip_irqchip_add()
after the gpiochip itself is registered as required.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sunxi: number gpio ranges starting from 0 2014-07-28T10:14:33+00:00 Chen-Yu Tsai wens@csie.org 2014-07-14T17:24:37+00:00 343f132752bede1dc3a740ba469b665ffb111500 The pinctrl-sunxi driver originally used the pin number as the gpio range offset. This resulted in large, bogus gpio numbers for the new sun6i-a31-r pinctrl devices. This patch makes the driver number the gpios ranges starting from an offset of 0, by subtracting the pin_base number from the pin number. This also makes the system-wide gpio number match the pin number. Tested on sun8i with sysfs exported gpios. This patch also changes the GPIO bindings for R_PIO: gpios = <&r_pio B N flag>; Where B originally was the pinbank label (L or M) counted from A, with this patch it becomes (L or M) counted from its pinbank base (L). Thus gpios = <&r_pio 10 11 0>; /* PL11 */ becomes gpios = <&r_pio 0 11 0>; /* PL11 */ IMO this is correct, as the binding shows the bank offset and pin offset within the bank for the GPIO controller. But I'm worried it might be a bit confusing. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The pinctrl-sunxi driver originally used the pin number as the gpio
range offset. This resulted in large, bogus gpio numbers for the
new sun6i-a31-r pinctrl devices.

This patch makes the driver number the gpios ranges starting from an
offset of 0, by subtracting the pin_base number from the pin number.
This also makes the system-wide gpio number match the pin number.

Tested on sun8i with sysfs exported gpios.

This patch also changes the GPIO bindings for R_PIO:

    gpios = <&r_pio B N flag>;

Where B originally was the pinbank label (L or M) counted from A,
with this patch it becomes (L or M) counted from its pinbank base (L).

Thus

    gpios = <&r_pio 10 11 0>; /* PL11 */

becomes

    gpios = <&r_pio 0 11 0>; /* PL11 */

IMO this is correct, as the binding shows the bank offset and pin offset
within the bank for the GPIO controller. But I'm worried it might be a
bit confusing.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ 2014-07-28T10:10:46+00:00 Chen-Yu Tsai wens@csie.org 2014-07-14T17:24:36+00:00 f83549d61d6de28ea8cbbef9f8d12b697c6ed1dd When an IRQ is started on a GPIO line, mark this GPIO as IRQ in the gpiolib so we can keep track of the usage centrally. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
When an IRQ is started on a GPIO line, mark this GPIO as IRQ in
the gpiolib so we can keep track of the usage centrally.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: rockchip: add drive-strength control for rk3288 2014-07-23T14:41:16+00:00 Heiko Stübner heiko@sntech.de 2014-07-19T23:50:11+00:00 b547c8007e83a476b946237d09227668fe286a57 The rk3288 is the first Rockchip soc handling the drive strength on a per-pin basis, while the older ones can set the drive-strength only for specific pin-groups. Therefore limit setting the drive-strength to this soc for now. Signed-off-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The rk3288 is the first Rockchip soc handling the drive strength on a per-pin
basis, while the older ones can set the drive-strength only for specific
pin-groups. Therefore limit setting the drive-strength to this soc for now.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: rockchip: add separate type for rk3288 2014-07-23T14:39:41+00:00 Heiko Stübner heiko@sntech.de 2014-07-19T23:49:17+00:00 66d750e1d03875512dec38993b4cac3640a85e54 An upcoming pinctrl function of the rk3288 differs again from everything else, so we'll need a separate type for it. Signed-off-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
An upcoming pinctrl function of the rk3288 differs again from everything else,
so we'll need a separate type for it.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: rockchip: set is_generic in pinconf_ops 2014-07-23T14:37:40+00:00 Heiko Stübner heiko@sntech.de 2014-07-19T23:48:45+00:00 ed62f2f25547ea9a25394087470a5816ee4db71b The rockchip pinctrl driver implements the generic pinconfig, therefore also state this, so that the default pinconf dump functions work. Signed-off-by: Heiko Stübner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The rockchip pinctrl driver implements the generic pinconfig, therefore
also state this, so that the default pinconf dump functions work.

Signed-off-by: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: msm: drop negativity check on unsigned value 2014-07-23T13:24:40+00:00 Andrey Utkin andrey.krieger.utkin@gmail.com 2014-07-17T16:29:39+00:00 1c349551027fadc9cfe1ec01068f6f8ac5b9331d [linux-3.16-rc5/drivers/pinctrl/pinctrl-msm.c:145]: (style) Checking if unsigned variable 'mux_bit' is less than zero. if (WARN_ON(g->mux_bit < 0)) return -EINVAL; Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80491 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
[linux-3.16-rc5/drivers/pinctrl/pinctrl-msm.c:145]: (style) Checking if
unsigned variable 'mux_bit' is less than zero.

    if (WARN_ON(g->mux_bit < 0))
        return -EINVAL;

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80491
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>