linux.git/drivers/pinctrl, branch v3.15-rc2 Linux kernel source tree pinctrl: Rename Broadcom Capri pinctrl driver 2014-04-14T07:39:33+00:00 Sherman Yin syin@broadcom.com 2014-04-02T22:40:37+00:00 7418b5cc81185e4ae1fec66156c464eb0b8d8f5a To be consistent with other Broadcom drivers, the Broadcom Capri pinctrl driver and its related CONFIG option are renamed to bcm281xx. Devicetree compatible string and binding documentation use "brcm,bcm11351-pinctrl" to match the machine binding here: Documentation/devicetree/bindings/arm/bcm/bcm11351.txt This driver supports pinctrl on BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 SoCs. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
To be consistent with other Broadcom drivers, the Broadcom Capri pinctrl
driver and its related CONFIG option are renamed to bcm281xx.

Devicetree compatible string and binding documentation use
"brcm,bcm11351-pinctrl" to match the machine binding here:
Documentation/devicetree/bindings/arm/bcm/bcm11351.txt

This driver supports pinctrl on BCM11130, BCM11140, BCM11351, BCM28145
and BCM28155 SoCs.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Matt Porter <mporter@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: msm: Correct interrupt code for TLMM v2 2014-04-14T07:39:33+00:00 Bjorn Andersson bjorn.andersson@sonymobile.com 2014-03-31T21:49:54+00:00 48f15e94f5a30bf335c3c972d592bc9212aca9ff Acking interrupts are done differently between on v2 and v3, so add an extra attribute to the pingroup struct to let the platform definitions control this. Also make sure to start dual edge detection by detecting the rising edge. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Acking interrupts are done differently between on v2 and v3, so add an extra
attribute to the pingroup struct to let the platform definitions control this.
Also make sure to start dual edge detection by detecting the rising edge.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: nomadik: delete stray debug print 2014-04-14T07:39:33+00:00 Linus Walleij linus.walleij@linaro.org 2014-04-09T07:18:18+00:00 6888c75b243307e616f95159a917b80121c426c7 I left this in by mistake, get rid of it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
I left this in by mistake, get rid of it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: rockchip: handle first half of rk3188-bank0 correctly 2014-04-14T07:39:33+00:00 Heiko Stübner heiko@sntech.de 2014-03-25T23:57:52+00:00 c4a532dee6b6e433d267d76d643e62ab90ca9eb9 The first half of pinbank 0 only has one muxing function (as gpios) and does not have a special mux-register. Therefore ensure that no other mux function can be selected and also do not write to a non-existent register. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The first half of pinbank 0 only has one muxing function (as gpios) and
does not have a special mux-register.

Therefore ensure that no other mux function can be selected and also do not
write to a non-existent register.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: rockchip: add return value to rockchip_set_mux 2014-04-14T07:39:33+00:00 Heiko Stübner heiko@sntech.de 2014-03-25T23:57:00+00:00 14797189b35e9ec4344eeb75bdca4120cba88b69 In a following change, rockchip_set_mux gets the possibility to fail. Therefore add a return value to it and honor error codes in functions using rockchip_set_mux. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
In a following change, rockchip_set_mux gets the possibility to fail.
Therefore add a return value to it and honor error codes in functions
using rockchip_set_mux.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: rockchip: fix offset of mux registers for rk3188 2014-04-14T07:39:33+00:00 Beniamino Galvani b.galvani@gmail.com 2014-03-24T22:36:01+00:00 22c0d7e36f74352f7b80679003bf7edf85736b2b The correct value of .mux_offset for rk3188 seems to be 0x60 instead of 0x68. Heiko adds: GPIO0 only has the second two IOMUX registers: - GRF_GPIO0C_IOMUX at 0x68 - GRF_GPIO0D_IOMUX at 0x6c which I guess is where my mistake comes from. It looks like there does no iomux register exist at all for the first 16 pins. In any case, the current number is wrong, and the 0x60 offset is the correct one, but I guess we need to determine what the affected pins do - do they always have a gpio mux or such? Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The correct value of .mux_offset for rk3188 seems to be 0x60
instead of 0x68.

Heiko adds:

GPIO0 only has the second two IOMUX registers:
- GRF_GPIO0C_IOMUX at 0x68
- GRF_GPIO0D_IOMUX at 0x6c
which I guess is where my mistake comes from.

It looks like there does no iomux register exist at all
for the first 16 pins.

In any case, the current number is wrong, and the 0x60
offset is the correct one, but I guess we need to
determine what the affected pins do - do they always have a
gpio mux or such?

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio 2014-04-03T23:44:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-04-03T23:44:15+00:00 154d6f18a48e00dec2dc84a96914fe1a24669577 Pull bulk of gpio updates from Linus Walleij: "A pretty big chunk of changes this time, but it has all been on rotation in linux-next and had some testing. Of course there will be some amount of fixes on top... - Merged in a branch of irqchip changes from Thomas Gleixner: we need to have new callbacks from the irqchip to determine if the GPIO line will be eligible for IRQs, and this callback must be able to say "no". After some thinking I got the branch from tglx and have switched all current users over to use this. - Based on tglx patches, we have added some generic irqchip helpers in the gpiolib core. These will help centralize code when GPIO drivers have simple chained/cascaded IRQs. Drivers will still define their irqchip vtables, but the gpiolib core will take care of irqdomain set-up, mapping from local offsets to Linux irqs, and reserve resources by marking the GPIO lines for IRQs. - Initially the PL061 and Nomadik GPIO/pin control drivers have been switched over to use the new gpiochip-to-irqchip infrastructure with more drivers expected for the next kernel cycle. The factoring of just two drivers still makes it worth it so it is already a win. - A new driver for the Synopsys DesignWare APB GPIO block. - Modify the DaVinci GPIO driver to be reusable also for the new TI Keystone architecture. - A new driver for the LSI ZEVIO SoCs. - Delete the obsolte tnetv107x driver. - Some incremental work on GPIO descriptors: have gpiod_direction_output() use a logical level, respecting assertion polarity through ACTIVE_LOW flags, adding gpiod_direction_output_raw() for the case where you want to set that very value. Add gpiochip_get_desc() to fetch a GPIO descriptor from a specific offset on a certain chip inside driver code. - Switch ACPI GPIO code over to using gpiochip_get_desc() and get rid of gpio_to_desc(). - The ACPI GPIO event handling code has been reworked after encountering an actual real life implementation. - Support for ACPI GPIO operation regions. - Generic GPIO chips can now be assigned labels/names from platform data. - We now clamp values returned from GPIO drivers to the boolean [0,1] range. - Some improved documentation on how to use the polarity flag was added. - a large slew of incremental driver updates and non-critical fixes. Some targeted for stable" * tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: rcar: Add helper variable dev = &pdev->dev gpio-lynxpoint: force gpio_get() to return "1" and "0" only gpio: unmap gpio irqs properly pch_gpio: set value before enabling output direction gpio: moxart: Actually set output state in moxart_gpio_direction_output() gpio: moxart: Avoid forward declaration gpio: mxs: Allow for recursive enable_irq_wake() call gpio: samsung: Add missing "break" statement gpio: twl4030: Remove redundant assignment gpio: dwapb: correct gpio-cells in binding document gpio: iop: fix devm_ioremap_resource() return value checking pinctrl: coh901: convert driver to use gpiolib irqchip pinctrl: nomadik: convert driver to use gpiolib irqchip gpio: pl061: convert driver to use gpiolib irqchip gpio: add IRQ chip helpers in gpiolib pinctrl: nomadik: factor in platform data container pinctrl: nomadik: rename secondary to latent gpio: Driver for SYSCON-based GPIOs gpio: generic: Use platform_device_id->driver_data field for driver flags pinctrl: coh901: move irq line locking to resource callbacks ... 
Pull bulk of gpio updates from Linus Walleij:
 "A pretty big chunk of changes this time, but it has all been on
  rotation in linux-next and had some testing.  Of course there will be
  some amount of fixes on top...

   - Merged in a branch of irqchip changes from Thomas Gleixner: we need
     to have new callbacks from the irqchip to determine if the GPIO
     line will be eligible for IRQs, and this callback must be able to
     say "no".  After some thinking I got the branch from tglx and have
     switched all current users over to use this.

   - Based on tglx patches, we have added some generic irqchip helpers
     in the gpiolib core.  These will help centralize code when GPIO
     drivers have simple chained/cascaded IRQs.  Drivers will still
     define their irqchip vtables, but the gpiolib core will take care
     of irqdomain set-up, mapping from local offsets to Linux irqs, and
     reserve resources by marking the GPIO lines for IRQs.

   - Initially the PL061 and Nomadik GPIO/pin control drivers have been
     switched over to use the new gpiochip-to-irqchip infrastructure
     with more drivers expected for the next kernel cycle.  The
     factoring of just two drivers still makes it worth it so it is
     already a win.

   - A new driver for the Synopsys DesignWare APB GPIO block.

   - Modify the DaVinci GPIO driver to be reusable also for the new TI
     Keystone architecture.

   - A new driver for the LSI ZEVIO SoCs.

   - Delete the obsolte tnetv107x driver.

   - Some incremental work on GPIO descriptors: have
     gpiod_direction_output() use a logical level, respecting assertion
     polarity through ACTIVE_LOW flags, adding gpiod_direction_output_raw()
     for the case where you want to set that very value.  Add
     gpiochip_get_desc() to fetch a GPIO descriptor from a specific
     offset on a certain chip inside driver code.

   - Switch ACPI GPIO code over to using gpiochip_get_desc() and get rid
     of gpio_to_desc().

   - The ACPI GPIO event handling code has been reworked after
     encountering an actual real life implementation.

   - Support for ACPI GPIO operation regions.

   - Generic GPIO chips can now be assigned labels/names from platform
     data.

   - We now clamp values returned from GPIO drivers to the boolean [0,1]
     range.

   - Some improved documentation on how to use the polarity flag was
     added.

   - a large slew of incremental driver updates and non-critical fixes.
     Some targeted for stable"

* tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits)
  gpio: rcar: Add helper variable dev = &pdev->dev
  gpio-lynxpoint: force gpio_get() to return "1" and "0" only
  gpio: unmap gpio irqs properly
  pch_gpio: set value before enabling output direction
  gpio: moxart: Actually set output state in moxart_gpio_direction_output()
  gpio: moxart: Avoid forward declaration
  gpio: mxs: Allow for recursive enable_irq_wake() call
  gpio: samsung: Add missing "break" statement
  gpio: twl4030: Remove redundant assignment
  gpio: dwapb: correct gpio-cells in binding document
  gpio: iop: fix devm_ioremap_resource() return value checking
  pinctrl: coh901: convert driver to use gpiolib irqchip
  pinctrl: nomadik: convert driver to use gpiolib irqchip
  gpio: pl061: convert driver to use gpiolib irqchip
  gpio: add IRQ chip helpers in gpiolib
  pinctrl: nomadik: factor in platform data container
  pinctrl: nomadik: rename secondary to latent
  gpio: Driver for SYSCON-based GPIOs
  gpio: generic: Use platform_device_id->driver_data field for driver flags
  pinctrl: coh901: move irq line locking to resource callbacks
  ...
Merge tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2014-04-01T20:10:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-04-01T20:10:49+00:00 d64b3932531cbc0c9d6bdb744446934435e9d6af Pull pin control bulk changes from Linus Walleij: "Pin control bulk changes for the v3.15 series, no new core functionality this time, just incremental driver updates: - A large refactoring of the MVEBU (Marvell) driver. - A large refactoring of the Tegra (nVidia) driver. - GPIO interrupt including soft edges support in the STi driver. - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin), pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung), sunxi (AllWinner), i.MX (Freescale), Baytrail" * tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: tegra: add some missing Tegra114 entries pinctrl: tegra: fix some mistakes in Tegra124 pinctrl: msm: fix up out-of-order merge conflict pinctrl: st: Fix error check for of_irq_to_resource usage pinctrl: tegra: consistency cleanup pinctrl: tegra: dynamically calculate function list of groups pinctrl: tegra: init Tegra20/30 at module_init time pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delays pinctrl: st: add pinctrl support for the STiH407 SoC pinctrl: st: Enhance the controller to manage unavailable registers pinctrl: msm: Simplify msm_config_reg() and callers pinctrl: msm: Remove impossible WARN_ON()s pinctrl: msm: Replace lookup tables with math pinctrl: msm: Drop OF_IRQ dependency pinctrl: msm: Drop unused includes pinctrl: msm: Check for ngpios > MAX_NR_GPIO pinctrl: msm: Silence recursive lockdep warning pinctrl: mvebu: silence WARN to dev_warn pinctrl: msm: drop wake_irqs bitmap pinctrl-baytrail: add function mux checking in gpio pin request ... 
Pull pin control bulk changes from Linus Walleij:
 "Pin control bulk changes for the v3.15 series, no new core
  functionality this time, just incremental driver updates:

   - A large refactoring of the MVEBU (Marvell) driver.

   - A large refactoring of the Tegra (nVidia) driver.

   - GPIO interrupt including soft edges support in the STi driver.

   - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin),
     pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung), sunxi
     (AllWinner), i.MX (Freescale), Baytrail"

* tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: tegra: add some missing Tegra114 entries
  pinctrl: tegra: fix some mistakes in Tegra124
  pinctrl: msm: fix up out-of-order merge conflict
  pinctrl: st: Fix error check for of_irq_to_resource usage
  pinctrl: tegra: consistency cleanup
  pinctrl: tegra: dynamically calculate function list of groups
  pinctrl: tegra: init Tegra20/30 at module_init time
  pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delays
  pinctrl: st: add pinctrl support for the STiH407 SoC
  pinctrl: st: Enhance the controller to manage unavailable registers
  pinctrl: msm: Simplify msm_config_reg() and callers
  pinctrl: msm: Remove impossible WARN_ON()s
  pinctrl: msm: Replace lookup tables with math
  pinctrl: msm: Drop OF_IRQ dependency
  pinctrl: msm: Drop unused includes
  pinctrl: msm: Check for ngpios > MAX_NR_GPIO
  pinctrl: msm: Silence recursive lockdep warning
  pinctrl: mvebu: silence WARN to dev_warn
  pinctrl: msm: drop wake_irqs bitmap
  pinctrl-baytrail: add function mux checking in gpio pin request
  ...
pinctrl: coh901: convert driver to use gpiolib irqchip 2014-03-26T09:31:34+00:00 Linus Walleij linus.walleij@linaro.org 2014-03-25T12:37:17+00:00 523dcce72c72e829b9d391f8020277038c6aab82 This converts the COH901 pin control driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This converts the COH901 pin control driver to register its
chained irq handler and irqchip using the helpers in the
gpiolib core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: nomadik: convert driver to use gpiolib irqchip 2014-03-26T09:31:33+00:00 Linus Walleij linus.walleij@linaro.org 2014-03-25T09:44:09+00:00 e0bc34a3dada03a48ff5501381ff7fdef885ed25 This converts the Nomadik pin control driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This converts the Nomadik pin control driver to register its
chained irq handler and irqchip using the helpers in the
gpiolib core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>