linux.git/drivers/pinctrl, branch v3.14-rc2 Linux kernel source tree pinctrl: tegra: return correct error type 2014-02-06T13:21:19+00:00 Laxman Dewangan ldewangan@nvidia.com 2014-02-05T13:41:34+00:00 5b232c5addc02980cfce451575f1d1f975bdb04e When memory allocation failed, drive should return error as ENOMEM. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
When memory allocation failed, drive should return error as ENOMEM.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: do not init debugfs entries for unimplemented functionalities 2014-02-06T12:48:17+00:00 Florian Vaussard florian.vaussard@epfl.ch 2014-02-05T06:51:22+00:00 e7f2a444891cb39f11d5429467d0fd7e011fe7fe Commit c420619 "pinctrl: pinconf: remove checks on ops->pin_config_get" removed the check on (ops != NULL) when performing pinconf_pins_show() or pinconf_groups_show(). As these entries are always enabled, even if pinconf is not supported, reading will result in an oops due to NULL ops. Instead of checking for ops, remove the corresponding debugfs entries if pinconf and/or pinmux are not implemented. Tested on OMAP3 (pinctrl-single). Cc: stable@vger.kernel.org Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Commit c420619 "pinctrl: pinconf: remove checks on ops->pin_config_get"
removed the check on (ops != NULL) when performing pinconf_pins_show() or
pinconf_groups_show(). As these entries are always enabled, even if
pinconf is not supported, reading will result in an oops due to NULL
ops.

Instead of checking for ops, remove the corresponding debugfs entries if
pinconf and/or pinmux are not implemented.

Tested on OMAP3 (pinctrl-single).

Cc: stable@vger.kernel.org
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: protect pinctrl_list add 2014-02-04T20:59:45+00:00 Stanislaw Gruszka sgruszka@redhat.com 2014-02-04T08:07:09+00:00 7b320cb1ed2dbd2c5f2a778197baf76fd6bf545a We have few fedora bug reports about list corruption on pinctrl, for example: https://bugzilla.redhat.com/show_bug.cgi?id=1051918 Most likely corruption happen due lack of protection of pinctrl_list when adding new nodes to it. Patch corrects that. Fixes: 42fed7ba44e ("pinctrl: move subsystem mutex to pinctrl_dev struct") Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
We have few fedora bug reports about list corruption on pinctrl,
for example:
https://bugzilla.redhat.com/show_bug.cgi?id=1051918

Most likely corruption happen due lack of protection of pinctrl_list
when adding new nodes to it. Patch corrects that.

Fixes: 42fed7ba44e ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: sirf: correct the pin index of ac97_pins group 2014-02-03T08:08:17+00:00 Qipan Li Qipan.Li@csr.com 2014-01-27T06:01:29+00:00 fa74d0d3e30cf079e94db327ea6d4726cd7d5871 according to datasheet and ac97_muxmask assignment, ac97_pins should be corrected. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
according to datasheet and ac97_muxmask assignment, ac97_pins should be
corrected.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: imx27: fix offset calculation in imx_read_2bit 2014-02-03T08:08:09+00:00 Chris Ruehl chris.ruehl@gtsys.com.hk 2014-01-22T03:14:52+00:00 e3365d0974ed64157f5b5a576c611057dc40a595 The offset for the 2bit register calculate wrong, this patch fixes the problem. The debugfs printout for oconf, iconfa, iconfb now shows the real values. Cc: stable@vger.kernel.org Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The offset for the 2bit register calculate wrong, this patch
fixes the problem. The debugfs printout for oconf, iconfa, iconfb
now shows the real values.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: vt8500: Change devicetree data parsing 2014-02-03T08:08:01+00:00 Tony Prisk linux@prisktech.co.nz 2014-01-23T08:57:33+00:00 f17248ed868767567298e1cdf06faf8159a81f7c Due to an assumption in the VT8500 pinctrl driver, the value passed from devicetree for 'wm,pull' was not explicitly translated before being passed to pinconf. Since v3.10, changes to 'enum pin_config_param', PIN_CONFIG_BIAS_PULL_(UP/DOWN) no longer map 1-to-1 with the expected values in devicetree. This patch adds a small translation between the devicetree values (0..2) and the enum pin_config_param equivalent values. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Due to an assumption in the VT8500 pinctrl driver, the value passed
from devicetree for 'wm,pull' was not explicitly translated before
being passed to pinconf.

Since v3.10, changes to 'enum pin_config_param', PIN_CONFIG_BIAS_PULL_(UP/DOWN)
no longer map 1-to-1 with the expected values in devicetree.

This patch adds a small translation between the devicetree values (0..2)
and the enum pin_config_param equivalent values.

Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: imx27: fix wrong offset to ICONFB 2014-02-03T08:07:52+00:00 Chris Ruehl chris.ruehl@gtsys.com.hk 2014-01-22T03:14:51+00:00 795779df22afc8bdee4e9fbe5c18c47e44974d75 The offset to ICONFB was incorrect, this patch set the correct value 0x14. dev_dbg in function imx1_write_2bit print the wrong address and had been moved after address calculation. Cc: stable@vger.kernel.org Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Reviewed-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The offset to ICONFB was incorrect, this patch set the correct value 0x14.
dev_dbg in function imx1_write_2bit print the wrong address and had been
moved after address calculation.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Reviewed-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: at91: use locked variant of irq_set_handler 2014-02-03T08:07:30+00:00 Nicolas Ferre nicolas.ferre@atmel.com 2014-01-21T15:55:18+00:00 b0dcfd87323ea86501e93d0fa2a98d2fd3579bcf When setting the gpio irq type, use the __irq_set_handler_locked() variant instead of the irq_set_handler() to prevent false spinlock recursion warning. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> # v3.12 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
When setting the gpio irq type, use the __irq_set_handler_locked()
variant instead of the irq_set_handler() to prevent false
spinlock recursion warning.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org> # v3.12
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2014-01-24T02:45:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-01-24T02:45:38+00:00 9b6d351a75dae25430383b29a3764ae7921f6c47 Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ... 
Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...
Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd 2014-01-21T18:58:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-01-21T18:58:17+00:00 ac26663572db5b64522b92f3941a58678a832a36 Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ... 
Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...