linux.git/drivers/pinctrl/uniphier, branch v5.6

pinctrl: uniphier: Fix Pro5 SD pin-mux setting

2019-08-05T11:21:31+00:00

SD uses the following pins starting from 247:
    SDCD, SDWP, SDVOLC, SDCLK, SDCMD, SDDAT{0,1,2,3}

Signed-off-by: Kunihiko Hayashi 
Acked-by: Masahiro Yamada 
Link: https://lore.kernel.org/r/1564465410-9165-6-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Linus Walleij

pinctrl: uniphier: Add Pro5 PCIe pin-mux settings

2019-08-05T11:20:26+00:00

Pro5 PCIe interface uses the following pins:
    XPERST, XPEWAKE, XPECLKRQ

Signed-off-by: Kunihiko Hayashi 
Link: https://lore.kernel.org/r/1564465410-9165-5-git-send-email-hayashi.kunihiko@socionext.com
Acked-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: Add 5th LD20 MPEG2-TS input pin-mux setting

2019-08-05T11:19:35+00:00

The 5th serial TS interface uses the following pins:
  hscin4_s: PCA[11-14]

Signed-off-by: Kunihiko Hayashi 
Acked-by: Masahiro Yamada 
Link: https://lore.kernel.org/r/1564465410-9165-4-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Linus Walleij

pinctrl: uniphier: Add another audio I/O pin-mux settings for LD20

2019-08-05T11:18:34+00:00

This adds support for pinmux settings of aout1b group. This group includes
audio I/O signals derived from xirq pins, and it is equivalent to "aout1"
in functionality.

Signed-off-by: Kunihiko Hayashi 
Link: https://lore.kernel.org/r/1564465410-9165-3-git-send-email-hayashi.kunihiko@socionext.com
Acked-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: Separate modem group from UART ctsrts group

2019-08-05T11:17:20+00:00

It depends on the board implementation whether to have each pins of
CTS/RTS, and others for modem. So it is necessary to divide current
uart_ctsrts group into uart_ctsrts and uart_modem groups.

Since the number of implemented pins for modem differs depending
on SoC, each uart_modem group also has a different number of pins.

Signed-off-by: Kunihiko Hayashi 
Link: https://lore.kernel.org/r/1564465410-9165-2-git-send-email-hayashi.kunihiko@socionext.com
Acked-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

pinctrl: uniphier: constify uniphier_pinctrl_socdata

2018-12-21T10:18:08+00:00

These are constant data.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: convert to SPDX License Identifier

2018-12-07T12:39:22+00:00

checkpatch.pl suggests to use SPDX license tag. I am happy to
follow it.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: include instead of

2018-10-16T08:01:59+00:00

The reason of including  here is just for BIT() macro.

Since commit 8bd9cb51daac8 ("locking/atomics, asm-generic: Move some
macros from  to a new  file"),
 is enough for such compile-time macros.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij

pinctrl: uniphier: drop meaningless pin from SD1 pin-mux of Pro4

2018-08-29T08:50:12+00:00

The pin 327 was supposed to be used as a voltage control line for the
SD card regulator, but the SD card port1 does not support UHS-I.  It
only supports 3.3V signaling, hence this pin is pointless.

Just a note about the background.  At first, hardware engineers tried
to implement the UHS for this port.  Then, they needed to shrink the
silicon die size, and gave up the UHS, but forgot to remove the pin
assignment.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Linus Walleij