linux.git/drivers/pinctrl/tegra, branch v6.6

Revert "pinctrl: tegra: Add support to display pin function"

2023-09-27T08:51:57+00:00

This reverts commit d1cd5b51bc9152dc2b63c5f843590272d6694d50.

It was reported that some I2C3 functions stop working after this
patch, and it is just debug help so let's revert it and investigate.

Link: https://lore.kernel.org/linux-gpio/20230925183049.10a40546@booty/
Signed-off-by: Linus Walleij

Merge tag 'intel-pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

2023-08-25T13:47:18+00:00

intel-pinctrl for v6.6-1

* New library driver for Intel MID to deduplicate code (Raag Jadav)
* Reuse common functions from pinctrl-intel to reduce the code (Raag Jadav)
* Move most of the exported functions to the PINCTRL_INTEL namespace
* Make use of pm_ptr() in Bay Trail and Lynxpoint drivers
* Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper and use it in a few drivers
* Consolidata ACPI dependency in Kconfig (Raag Jadav)
* Fix address_space_handler() argument in Cherryview driver (Raag Jadav)
* Optinmize byt_pin_config_set() to avoid IO in error cases (Raag Jadav)

The following is an automated git shortlog grouped by driver:

at91:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

baytrail:
 -  Make use of pm_ptr()
 -  reuse common functions from pinctrl-intel
 -  consolidate common mask operation

cherryview:
 -  fix address_space_handler() argument
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
 -  reuse common functions from pinctrl-intel

intel:
 -  consolidate ACPI dependency
 -  Switch to use exported namespace
 -  export common pinctrl functions

lynxpoint:
 -  Make use of pm_ptr()
 -  reuse common functions from pinctrl-intel

Merge patch series:
 - Merge patch series "Introduce Intel Tangier pinctrl driver"
 - Merge patch series "Reuse common functions from pinctrl-intel"

merrifield:
 -  Adapt to Intel Tangier driver

moorefield:
 -  Adapt to Intel Tangier driver

mvebu:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

pm:
 -  Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper

renesas:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

tangier:
 -  Introduce Intel Tangier driver

tegra:
 -  Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

Signed-off-by: Linus Walleij

pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper

2023-08-21T16:07:44+00:00

Since pm.h provides a helper for system no-IRQ PM callbacks,
switch the driver to use it instead of open coded variant.

With that, make sure the PM ops are used only in CONFIG_PM_SLEEP=y
case by wrapping them in pm_sleep_ptr() macro.

Acked-by: Thierry Reding 
Link: https://lore.kernel.org/r/20230717172821.62827-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko

pinctrl: Explicitly include correct DT includes

2023-07-20T19:41:24+00:00

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring 
Reviewed-by: Damien Le Moal 
Acked-by: Emil Renner Berthing 
Acked-by: Geert Uytterhoeven 
Link: https://lore.kernel.org/r/20230714174901.4062397-1-robh@kernel.org
Signed-off-by: Linus Walleij

pinctrl: tegra: Add support to display pin function

2023-07-20T19:34:53+00:00

The current function for a given pin is not displayed via the debugfs.
Add support to display the current function that is set for each pin.

Signed-off-by: Prathamesh Shete 
Acked-by: Thierry Reding 
Reviewed-by: Jon Hunter 
Link: https://lore.kernel.org/r/20230714113547.15384-1-pshete@nvidia.com
Signed-off-by: Linus Walleij

pinctrl: tegra: avoid duplicate field initializers

2023-06-19T08:54:35+00:00

The drv_reg field is initialized both in the DRV_PINGROUP_ENTRY_N/DRV_PINGROUP_ENTRY_Y
macros and in DRV_PINGROUP_Y. Since each pingroup expands both macros, the are
always duplicate and turning on -Woverride-init (which is disabled by default)
causes a huge amount of warnings like:

drivers/pinctrl/tegra/pinctrl-tegra234.c:1384:27: error: initialized field overwritten [-Werror=override-init]
 1384 | #define DRV_PINGROUP_Y(r) ((r))
      |                           ^
drivers/pinctrl/tegra/pinctrl-tegra234.c:1397:28: note: in expansion of macro 'DRV_PINGROUP_Y'
 1397 |                 .drv_reg = DRV_PINGROUP_Y(r),                   \
      |                            ^~~~~~~~~~~~~~
drivers/pinctrl/tegra/pinctrl-tegra234.c:1447:49: note: in expansion of macro 'DRV_PINGROUP_ENTRY_Y'
 1447 | #define drive_soc_gpio08_pb0                    DRV_PINGROUP_ENTRY_Y(0x500c,    12,     5,      20,     5,      -1,     -1,     -1,     -1,     0)
      |                                                 ^~~~~~~~~~~~~~~~~~~~
...

Remove the intialization that is never used here.

Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20230616161603.1127687-1-arnd@kernel.org
Signed-off-by: Linus Walleij

pinctrl: tegra: Add Tegra234 pinmux driver

2023-06-09T07:14:44+00:00

This change adds support for the two pin controllers found on Tegra234.

Signed-off-by: Prathamesh Shete 
Signed-off-by: Thierry Reding 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20230605154230.2910847-3-thierry.reding@gmail.com
Signed-off-by: Linus Walleij

pinctrl: tegra: Consistently refer to SoC data

2023-06-01T11:17:35+00:00

The SoC-specific data is stored in pmx->soc and that's used throughout
the driver to access this data. The probe function has access to a local
version of that copy and uses it in some occasions. Replace them with
the more standard pmx->soc access for more consistency.

Signed-off-by: Thierry Reding 
Link: https://lore.kernel.org/r/20230530105308.1292852-2-thierry.reding@gmail.com
Signed-off-by: Linus Walleij

pinctrl: tegra: Duplicate pinmux functions table

2023-06-01T11:17:35+00:00

The function table is filled with group information based on other
instance-specific data at runtime. However, the function table can be
shared between multiple instances, causing the ->probe() function for
one instance to overwrite the table of a previously probed instance.

Fix this by sharing only the function names and allocating a separate
function table for each instance.

Fixes: 5a0047360743 ("pinctrl: tegra: Separate Tegra194 instances")
Signed-off-by: Thierry Reding 
Link: https://lore.kernel.org/r/20230530105308.1292852-1-thierry.reding@gmail.com
Signed-off-by: Linus Walleij

pinctrl: tegra: Separate Tegra194 instances

2022-11-14T13:16:46+00:00

Tegra194 has two separate instances of the pin controller, one called
AON (in the always-on domain) and another called "main". Instead of
treating them as a single pin controller, split them up into two
separate controllers. Doing so allows the mapping between the pinmux
and GPIO controllers to be trivial identity mappings and more cleanly
separates the AON from the main IP blocks.

Signed-off-by: Thierry Reding 
Link: https://lore.kernel.org/r/20221104142345.1562750-4-thierry.reding@gmail.com
Signed-off-by: Linus Walleij