linux.git/drivers/pinctrl/sirf, branch v4.5

Merge tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-01-17T20:32:01+00:00

Pull GPIO updates from Linus Walleij:
 "Here is the bulk of GPIO changes for v4.5.

  Notably there are big refactorings mostly by myself, aimed at getting
  the gpio_chip into a shape that makes me believe I can proceed to
  preserve state for a proper userspace ABI (character device) that has
  already been proposed once, but resulted in the feedback that I need
  to go back and restructure stuff.  So I've been restructuring stuff.
  On the way I ran into brokenness (return code from the get_value()
  callback) and had to fix it.  Also, refactored generic GPIO to be
  simpler.

  Some of that is still waiting to trickle down from the subsystems all
  over the kernel that provide random gpio_chips, I've touched every
  single GPIO driver in the kernel now, oh man I didn't know I was
  responsible for so much...

  Apart from that we're churning along as usual.

  I took some effort to test and retest so it should merge nicely and we
  shook out a couple of bugs in -next.

  Infrastructural changes:

   - In struct gpio_chip, rename the .dev node to .parent to better
     reflect the fact that this is not the GPIO struct device
     abstraction.  We will add that soon so this would be totallt
     confusing.

   - It was noted that the driver .get_value() callbacks was sometimes
     reporting negative -ERR values to the gpiolib core, expecting them
     to be propagated to consumer gpiod_get_value() and gpio_get_value()
     calls.  This was not happening, so as there was a mess of drivers
     returning negative errors and some returning "anything else than
     zero" to indicate that a line was active.  As some would have bit
     31 set to indicate "line active" it clashed with negative error
     codes.  This is fixed by the largeish series clamping values in all
     drivers with !!value to [0,1] and then augmenting the code to
     propagate error codes to consumers.  (Includes some ACKed patches
     in other subsystems.)

   - Add a void *data pointer to struct gpio_chip.  The container_of()
     design pattern is indeed very nice, but we want to reform the
     struct gpio_chip to be a non-volative, stateless business, and keep
     states internal to the gpiolib to be able to hold on to the state
     when adding a proper userspace ABI (character device) further down
     the road.  To achieve this, drivers need a handle at the internal
     state that is not dependent on their struct gpio_chip() so we add
     gpiochip_add_data() and gpiochip_get_data() following the pattern
     of many other subsystems.  All the "use gpiochip data pointer"
     patches transforms drivers to this scheme.

   - The Generic GPIO chip header has been merged into the general
      header, and the custom header for that
     removed.  Instead of having a separate mm_gpio_chip struct for
     these generic drivers, merge that into struct gpio_chip,
     simplifying the code and removing the need for separate and
     confusing includes.

  Misc improvements:

   - Stabilize the way GPIOs are looked up from the ACPI legacy
     specification.

   - Incremental driver features for PXA, PCA953X, Lantiq (patches from
     the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48

  New drivers:

   - Add a GPIO chip to the ALSA SoC AC97 driver.

   - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
     but the branch is merged here too to account for infrastructural
     changes).

   - The sx150x driver now supports the sx1502"

* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
  gpio: generic: make bgpio_pdata always visible
  gpiolib: fix chip order in gpio list
  gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
  gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
  gpio: brcmstb: Allow building driver for BMIPS_GENERIC
  gpio: brcmstb: Set endian flags for big-endian MIPS
  gpio: moxart: fix build regression
  gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
  leds: pca9532: use gpiochip data pointer
  leds: tca6507: use gpiochip data pointer
  hid: cp2112: use gpiochip data pointer
  bcma: gpio: use gpiochip data pointer
  avr32: gpio: use gpiochip data pointer
  video: fbdev: via: use gpiochip data pointer
  gpio: pch: Optimize pch_gpio_get()
  Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
  pinctrl: nsp-gpio: use gpiochip data pointer
  pinctrl: vt8500-wmt: use gpiochip data pointer
  pinctrl: exynos5440: use gpiochip data pointer
  pinctrl: at91-pio4: use gpiochip data pointer
  ...

pinctrl: sirf: use gpiochip data pointer

2016-01-05T13:15:05+00:00

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Barry Song 
Signed-off-by: Linus Walleij

pinctrl: sirf-atlas7: use gpiochip data pointer

2016-01-05T13:15:05+00:00

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: Barry Song 
Signed-off-by: Linus Walleij

pinctrl: sirf: add missing of_node_put

2015-12-22T12:44:56+00:00

for_each_child_of_node performs an of_node_get on each iteration, so a
return from the loop requires an of_node_put.

A simplified version of the semantic patch that fixes this problem is as
follows (http://coccinelle.lip6.fr):

// 
@@
local idexpression n;
expression e,e1;
@@

 for_each_child_of_node(e1,n) {
   ...
(
   of_node_put(n);
|
   e = n
|
   return n;
|
+  of_node_put(n);
?  return ...;
)
   ...
 }
// 

Signed-off-by: Julia Lawall 
Signed-off-by: Linus Walleij

pinctrl: atlas7: add pulse conter pin group without direction pin

2015-12-10T15:23:50+00:00

DR needs use the pulse counter direction pin as common gpio
function.

Signed-off-by: Guoying Zhang 
Signed-off-by: Barry Song 
Signed-off-by: Linus Walleij

pinctrl: atlas7: adjust vip pin groups for atlas7

2015-12-10T15:23:03+00:00

The vip low 8bit mode and vip high 8 bit mode pin groups had missed
3 pins:vip_vsync, vip_hsync and vip_pxclk. Without these 3 pins, the
vip could not work properly.
Now we add these 3 pins into these two pin groups.

Signed-off-by: Wei Chen 
Signed-off-by: Barry Song 
Signed-off-by: Linus Walleij

pinctrl: atlas7: adjust pin groups of atlas7 nanddisk

2015-12-10T15:22:11+00:00

Remove write-protect and chip-selector pins from nand pin group.
And then create two separate pin groups for these two pin.

So the nand driver can choose correct pin groups as board desgin:
For example:
1. nand without wp&cs:
	nand@17050000 {
		pinctrl-0 = <&nd_df_basic_pmx>;
	};
2. nand with wp
        nand@17050000 {
                pinctrl-0 = <&nd_df_basic_pmx &nd_df_wp_pmx>;
        };
3. nand with cs:
        nand@17050000 {
                pinctrl-0 = <&nd_df_basic_pmx &nd_df_cs_pmx>;
        };
4. nand with wp&cs:
        nand@17050000 {
                pinctrl-0 = <&nd_df_basic_pmx &nd_df_wp_pmx &nd_df_cs_pmx>;
        };

Signed-off-by: Wei Chen 
Signed-off-by: Barry Song 
Signed-off-by: Linus Walleij

pinctrl: altas7: add sd9 function mux support

2015-12-10T15:21:14+00:00

The sd9 pin mux with sd3 and it is selected by SYS2PCI_SDIO9SEL.
This makes the codes ugly since the register is not in pinctrl
module.

Signed-off-by: Yonghui Zhang 
Signed-off-by: Barry Song 
Signed-off-by: Linus Walleij

pinctrl: atlas7: add cs line for atlas7 nand

2015-12-10T15:20:50+00:00

The nand in atlas7 has two chip select line. But in most time, the
nand only has one chip, so only one chip select line is enough.
The nand driver select this new pin group can free one chip select
line for other modules to avoid pin conflict.

Signed-off-by: Wei Chen 
Signed-off-by: Barry Song 
Signed-off-by: Linus Walleij

gpio: change member .dev to .parent

2015-11-19T08:24:35+00:00

The name .dev in a struct is normally reserved for a struct device
that is let us say a superclass to the thing described by the struct.
struct gpio_chip stands out by confusingly using a struct device *dev
to point to the parent device (such as a platform_device) that
represents the hardware. As we want to give gpio_chip:s real devices,
this is not working. We need to rename this member to parent.

This was done by two coccinelle scripts, I guess it is possible to
combine them into one, but I don't know such stuff. They look like
this:

@@
struct gpio_chip *var;
@@
-var->dev
+var->parent

and:

@@
struct gpio_chip var;
@@
-var.dev
+var.parent

and:

@@
struct bgpio_chip *var;
@@
-var->gc.dev
+var->gc.parent

Plus a few instances of bgpio that I couldn't figure out how
to teach Coccinelle to rewrite.

This patch hits all over the place, but I *strongly* prefer this
solution to any piecemal approaches that just exercise patch
mechanics all over the place. It mainly hits drivers/gpio and
drivers/pinctrl which is my own backyard anyway.

Cc: Haavard Skinnemoen 
Cc: Rafał Miłecki 
Cc: Richard Purdie 
Cc: Mauro Carvalho Chehab 
Cc: Alek Du 
Cc: Jaroslav Kysela 
Cc: Takashi Iwai 
Acked-by: Dmitry Torokhov 
Acked-by: Greg Kroah-Hartman 
Acked-by: Lee Jones 
Acked-by: Jiri Kosina 
Acked-by: Hans-Christian Egtvedt 
Acked-by: Jacek Anaszewski 
Signed-off-by: Linus Walleij