linux.git/drivers/pinctrl/samsung, branch v4.2

pinctrl: samsung: Remove old unused defines

2015-07-17T07:55:55+00:00

Since 9a2c1c3b91aa ("pinctrl: samsung: Allow grouping multiple
pinmux/pinconf nodes") the defines for GPIO group and function names are
not used anywhere in the driver.

Signed-off-by: Krzysztof Kozlowski 
Inspired-by: Dan Carpenter 
Signed-off-by: Linus Walleij

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-07-01T22:19:35+00:00

Pull irq fixes from Thomas Gleixner:
 "This contains:

   - a series of fixes for interrupt drivers to prevent a potential race
     when installing a chained interrupt handler

   - a fix for cpumask pointer misuse

   - a fix for using the wrong interrupt number from struct irq_data

   - removal of unused code and outdated comments

   - a few new helper functions which allow us to cleanup the interrupt
     handling code further in 4.3

   I decided against doing the cleanup at the end of this merge window
   and rather do the preparatory steps for 4.3, so we can run the final
   ABI change at the end of the 4.3 merge window with less risk"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  ARM/LPC32xx: Use irq not hwirq for __irq_set_handler_locked()
  genirq: Implement irq_set_handler_locked()/irq_set_chip_handler_name_locked()
  genirq: Introduce helper irq_desc_get_irq()
  genirq: Remove irq_node()
  genirq: Clean up outdated comments related to include/linux/irqdesc.h
  mn10300: Fix incorrect use of irq_data->affinity
  MIPS/ralink: Fix race in installing chained IRQ handler
  MIPS/pci: Fix race in installing chained IRQ handler
  MIPS/ath25: Fix race in installing chained IRQ handler
  MIPS/ath25: Fix race in installing chained IRQ handler
  m68k/psc: Fix race in installing chained IRQ handler
  avr32/at32ap: Fix race in installing chained IRQ handler
  sh/intc: Fix race in installing chained IRQ handler
  sh/intc: Fix potential race in installing chained IRQ handler
  pinctrl/sun4i: Fix race in installing chained IRQ handler
  pinctrl/samsung: Fix race in installing chained IRQ handler
  pinctrl/samsung: Fix race in installing chained IRQ handler
  pinctrl/exynos: Fix race in installing chained IRQ handler
  pinctrl/st: Fix race in installing chained IRQ handler
  pinctrl/adi2: Fix race in installing chained IRQ handler
  ...

pinctrl/samsung: Fix race in installing chained IRQ handler

2015-06-25T09:57:15+00:00

Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King 
Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Tomasz Figa 
Cc: Thomas Abraham 
Cc: Linus Walleij 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org

pinctrl/samsung: Fix race in installing chained IRQ handler

2015-06-25T09:57:13+00:00

Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King 
Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Tomasz Figa 
Cc: Thomas Abraham 
Cc: Linus Walleij 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org

pinctrl/exynos: Fix race in installing chained IRQ handler

2015-06-25T09:57:11+00:00

Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

Search and conversion was done with coccinelle:

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
|
-irq_set_chained_handler(E1, E3);
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

@@
expression E1, E2, E3;
@@
(
-if (irq_set_chained_handler(E1, E3) != 0)
-   BUG();
...
|
-irq_set_chained_handler(E1, E3);
...
)
-irq_set_handler_data(E1, E2);
+irq_set_chained_handler_and_data(E1, E3, E2);

Reported-by: Russell King 
Signed-off-by: Thomas Gleixner 
Cc: Julia Lawall 
Cc: Tomasz Figa 
Cc: Thomas Abraham 
Cc: Linus Walleij 
Cc: Kukjin Kim 
Cc: Krzysztof Kozlowski 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org

pinctrl: make pinctrl_register() return proper error code

2015-06-10T12:49:52+00:00

Currently, pinctrl_register() just returns NULL on error, so the
callers can not know the exact reason of the failure.

Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some
-ENOMEM on error of pinctrl_register(), although the error code
might be different from the real cause of the error.

This commit reworks pinctrl_register() to return the appropriate
error code and modifies all of the pinctrl drivers to use IS_ERR()
for the error checking and PTR_ERR() for getting the error code.

Signed-off-by: Masahiro Yamada 
Acked-by: Patrice Chotard 
Acked-by: Thierry Reding 
Acked-by: Heiko Stuebner 
Tested-by: Mika Westerberg 
Acked-by: Mika Westerberg 
Acked-by: Lee Jones 
Acked-by: Sören Brinkmann 
Acked-by: Laurent Pinchart 
Acked-by: Ray Jui 
Acked-by: Antoine Tenart 
Acked-by: Hongzhou Yang 
Acked-by: Wei Chen 
Signed-off-by: Linus Walleij

pinctrl: samsung: Fix the pointer in PTR_ERR()

2015-06-04T08:14:35+00:00

PTR_ERR should access the value just tested by IS_ERR

The semantic patch that makes this change is available
in scripts/coccinelle/tests/odd_ptr_err.cocci.

Signed-off-by: Fabio Estevam 
Signed-off-by: Linus Walleij

pinctrl: exynos: Remove eint_gpio_init call-back for exynos7 alive pinctrl block

2015-03-18T01:02:19+00:00

The alive pin controller on exynos7 does not support external gpio
interrupts. Hence, remove the eint_gpio_init call-back for it. This
fixes the following error message seen during exynos7 boot-up:
"samsung-pinctrl 10580000.pinctrl: irq number not available"

Signed-off-by: Abhilash Kesavan 
Acked-by: Tomasz Figa 
Signed-off-by: Linus Walleij

pinctrl: exynos: Add support for Exynos5433

2015-03-05T09:52:54+00:00

This patch adds driver data for Exynos5433 SoC. Exynos5433 includes 228 multi-
functional input/output port pins and 135 memory port pins. There are 41 general
port groups and 2 memory port groups.

Cc: Thomas Abraham 
Acked-by: Tomasz Figa 
Signed-off-by: Chanwoo Choi 
Acked-by: Inki Dae 
Signed-off-by: Linus Walleij

pinctrl: exynos: Add AUDIO pin controller for exynos7

2015-01-19T10:04:47+00:00

Audio IPs on Exynos7 require gpios available in AUDIO
pin controller block. So adding the AUDIO pinctrl support.

Signed-off-by: Padmavathi Venna 
Signed-off-by: Linus Walleij