linux.git/drivers/pinctrl/meson, branch v4.13

pinctrl: meson-gxl: add tsin_a pins

2017-06-16T09:08:49+00:00

Add Tsin A pins to bank DV and X.
We don't have a driver for the tsin yet but since the tsin A pinmux is
enabled by default at boot time, declaring this pinmux is required to
properly operate on GPIOX.

Without this change, GPIOX 8, 9, 10 and 11 can't be driven as GPIO output
as the tsin A seems to have priority.

Signed-off-by: Jerome Brunet 
Acked-by: Neil Armstrong 
Signed-off-by: Linus Walleij

pinctrl: meson: add interrupts to pinctrl data

2017-06-09T07:28:20+00:00

Add GPIO interrupt information to pinctrl data. Added to the original
version from Jerome was data for Meson GXL.

Signed-off-by: Jerome Brunet 
Signed-off-by: Heiner Kallweit 
Acked-by: Neil Armstrong 
Signed-off-by: Linus Walleij

pinctrl: meson-gxbb: remove non-existing pin GPIOX_22

2017-06-09T07:25:10+00:00

After commit 34e61801a3b9 "pinctrl: meson-gxbb: Add missing GPIODV_18
pin entry" I started to get the following warning:

"meson-pinctrl c8834000.periphs:pinctrl@4b0: names 119 do not match
number of GPIOs 120"

It turned out that not the mentioned commit has a problem, it just
revealed another problem which had existed before.

There is no PIN GPIOX_22 on Meson GXBB.

Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC")
Signed-off-by: Heiner Kallweit 
Reviewed-by: Neil Armstrong 
Signed-off-by: Linus Walleij

pinctrl: meson-gxl: Add Ethernet PHY LEDS pins

2017-05-29T09:00:59+00:00

The Amlogic Meson GXL SoCs embeds an 10/100 Ethernet PHY, this patchs enables
the Link and Activity LEDs signals.

Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij

pinctrl: meson-gxl: Add CEC pins

2017-05-29T08:59:47+00:00

Add the AO and EE domain CEC pins for the Amlogic Meson GXL SoCs.

Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij

pinctrl: meson-gxbb: Add CEC pins

2017-05-29T08:58:46+00:00

Add the AO and EE domain CEC pins for the Amlogic Meson GXBB SoCs.

Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij

pinctrl: meson-gxl: Fix typo in AO SPDIF pins

2017-05-29T08:57:36+00:00

The AO SPDIF pins were incorrectly defined with the EE pin offset.

Fixes: b840d649f9ec ("pinctrl: meson: gxl: add spdif output pins")
Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij

pinctrl: meson-gxl: Fix typo in AO I2S pins

2017-05-29T08:56:33+00:00

The AO I2S pins were incorrectly defined with the EE pin offset.

Fixes: 2899adf0422 ("pinctrl: meson: gxl: add i2s output pins")
Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij

pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry

2017-05-29T08:55:14+00:00

GPIODV_18 entry was missing in the original driver push.

Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC")
Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij

pinctrl: meson-gxl: Add missing GPIODV_18 pin entry

2017-05-29T08:54:05+00:00

GPIODV_18 entry was missing in the original driver push.

Fixes: 0f15f500ff2c ("pinctrl: meson: Add GXL pinctrl definitions")
Signed-off-by: Neil Armstrong 
Reviewed-by: Jerome Brunet 
Signed-off-by: Linus Walleij