linux.git/drivers/pinctrl/mediatek, branch v4.18 Linux kernel source tree pinctrl: mt7622: fix a kernel panic when gpio-hog is being applied 2018-07-14T10:47:04+00:00 Sean Wang sean.wang@mediatek.com 2018-06-22T03:49:08+00:00 5b1c4bf2519efc2328d252fd7697bdfb306f10f3 When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
When we are explicitly using GPIO hogging mechanism in the pinctrl node,
such as:

	&pio {
		line_input {
			gpio-hog;
			gpios = <95 0>, <96 0>, <97 0>;
			input;
		};
	};

A kernel panic happens at dereferencing a NULL pointer: In this case, the
drvdata is still not setup properly yet when it is being accessed.

A better solution for fixing up this issue should be we should obtain the
private data from struct gpio_chip using a specific gpiochip_get_data
instead of a generic dev_get_drvdata.

[    0.249424] Unable to handle kernel NULL pointer dereference at virtual
	       address 000000c8
[    0.257818] Mem abort info:
[    0.260704]   ESR = 0x96000005
[    0.263869]   Exception class = DABT (current EL), IL = 32 bits
[    0.270011]   SET = 0, FnV = 0
[    0.273167]   EA = 0, S1PTW = 0
[    0.276421] Data abort info:
[    0.279398]   ISV = 0, ISS = 0x00000005
[    0.283372]   CM = 0, WnR = 0
[    0.286440] [00000000000000c8] user address but active_mm is swapper
[    0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[    0.298795] Modules linked in:
[    0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #389
[    0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT)
[    0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    0.319362] pc : mtk_hw_pin_field_get+0x28/0x118
[    0.324140] lr : mtk_hw_set_value+0x30/0x104
[    0.328557] sp : ffffff800801b6d0
[    0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970
[    0.337484] x27: 0000000000000000 x26: ffffff80087b8000
[    0.342986] x25: 0000000000000000 x24: ffffffc00324c230
[    0.348487] x23: 0000000000000003 x22: 0000000000000000
[    0.353988] x21: ffffff80087b8000 x20: 0000000000000000
[    0.359489] x19: 0000000000000054 x18: 00000000fffff7c0
[    0.364990] x17: 0000000000006300 x16: 000000000000003f
[    0.370492] x15: 000000000000000e x14: ffffffffffffffff
[    0.375993] x13: 0000000000000000 x12: 0000000000000020
[    0.381494] x11: 0000000000000006 x10: 0101010101010101
[    0.386995] x9 : fffffffffffffffa x8 : 0000000000000007
[    0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003
[    0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800
[    0.403499] x3 : ffffff800801b728 x2 : 0000000000000003
[    0.409000] x1 : 0000000000000054 x0 : 0000000000000000
[    0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c)
[    0.421441] Call trace:
[    0.423968]  mtk_hw_pin_field_get+0x28/0x118
[    0.428387]  mtk_hw_set_value+0x30/0x104
[    0.432445]  mtk_gpio_set+0x20/0x28
[    0.436052]  mtk_gpio_direction_output+0x18/0x30
[    0.440833]  gpiod_direction_output_raw_commit+0x7c/0xa0
[    0.446333]  gpiod_direction_output+0x104/0x114
[    0.451022]  gpiod_configure_flags+0xbc/0xfc
[    0.455441]  gpiod_hog+0x8c/0x140
[    0.458869]  of_gpiochip_add+0x27c/0x2d4
[    0.462928]  gpiochip_add_data_with_key+0x338/0x5f0
[    0.467976]  mtk_pinctrl_probe+0x388/0x400
[    0.472217]  platform_drv_probe+0x58/0xa4
[    0.476365]  driver_probe_device+0x204/0x44c
[    0.480783]  __device_attach_driver+0xac/0x108
[    0.485384]  bus_for_each_drv+0x7c/0xac
[    0.489352]  __device_attach+0xa0/0x144
[    0.493320]  device_initial_probe+0x10/0x18
[    0.497647]  bus_probe_device+0x2c/0x8c
[    0.501616]  device_add+0x2f8/0x540
[    0.505226]  of_device_add+0x3c/0x44
[    0.508925]  of_platform_device_create_pdata+0x80/0xb8
[    0.514245]  of_platform_bus_create+0x290/0x3e8
[    0.518933]  of_platform_populate+0x78/0x100
[    0.523352]  of_platform_default_populate+0x24/0x2c
[    0.528403]  of_platform_default_populate_init+0x94/0xa4
[    0.533903]  do_one_initcall+0x98/0x130
[    0.537874]  kernel_init_freeable+0x13c/0x1d4
[    0.542385]  kernel_init+0x10/0xf8
[    0.545903]  ret_from_fork+0x10/0x18
[    0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401)
[    0.555916] ---[ end trace de8c34787fdad3b3 ]---
[    0.560722] Kernel panic - not syncing: Attempted to kill init!
	       exitcode=0x0000000b
[    0.560722]
[    0.570188] SMP: stopping secondary CPUs
[    0.574253] ---[ end Kernel panic - not syncing: Attempted to kill
	       init! exitcode=0x0000000b
[    0.574253]

Cc: stable@vger.kernel.org
Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mt7622: stop using the deprecated pinctrl_add_gpio_range 2018-07-14T10:47:04+00:00 Sean Wang sean.wang@mediatek.com 2018-06-22T03:49:07+00:00 de227ed7965d06dcfcd06376e03c107004a4881c If the pinctrl node has the gpio-ranges property, the range will be added by the gpio core and doesn't need to be added by the pinctrl driver. But for keeping backward compatibility, an explicit pinctrl_add_gpio_range is still needed to be called when there is a missing gpio-ranges in pinctrl node in old dts files. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
If the pinctrl node has the gpio-ranges property, the range will be added
by the gpio core and doesn't need to be added by the pinctrl driver.

But for keeping backward compatibility, an explicit pinctrl_add_gpio_range
is still needed to be called when there is a missing gpio-ranges in pinctrl
node in old dts files.

Cc: stable@vger.kernel.org
Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mt7622: fix that pinctrl_claim_hogs cannot work 2018-07-14T10:47:04+00:00 Sean Wang sean.wang@mediatek.com 2018-06-22T03:49:06+00:00 ae6efcae79dd2888243634b69fce51208b650192 To allow claiming hogs by pinctrl, we cannot enable pinctrl until all groups and functions are being added done. Also, it's necessary that the corresponding gpiochip is being added when the pinctrl device is enabled. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
To allow claiming hogs by pinctrl, we cannot enable pinctrl until all
groups and functions are being added done. Also, it's necessary that
the corresponding gpiochip is being added when the pinctrl device is
enabled.

Cc: stable@vger.kernel.org
Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mt7622: fix initialization sequence between eint and gpiochip 2018-07-14T10:47:04+00:00 Sean Wang sean.wang@mediatek.com 2018-06-22T03:49:05+00:00 8875059d2165f22236e87ed10188b0e18f116b93 Because gpichip applied in the driver must depend on mtk eint to implement the input data debouncing and the translation between gpio and irq, it's better to keep logic consistent with mtk eint being built prior to gpiochip being added. Cc: stable@vger.kernel.org Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Because gpichip applied in the driver must depend on mtk eint to implement
the input data debouncing and the translation between gpio and irq, it's
better to keep logic consistent with mtk eint being built prior to gpiochip
being added.

Cc: stable@vger.kernel.org
Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mt7622: fix error path on failing at groups building 2018-07-14T10:47:04+00:00 Sean Wang sean.wang@mediatek.com 2018-06-22T03:49:04+00:00 fafa35cce34ba4c4f6fd7f1026c038de0a2884af It should be to return an error code when failing at groups building. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
It should be to return an error code when failing at groups building.

Cc: stable@vger.kernel.org
Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mt7622: fix a kernel panic when pio don't work as EINT controller 2018-06-18T05:55:57+00:00 Sean Wang sean.wang@mediatek.com 2018-06-14T08:55:49+00:00 5f591543a937310e48baf0ee23680be09cdedfb8 The function, external interrupt controller, is made as an optional to mt7622 pinctrl. But if we don't want pio behaves as an external interrupt controller, it would lead to hw->eint not be created properly and then will cause 'kernel NULL pointer' issue when gpiochip try to call .to_irq or .set_config. To fix it, check hw->eint before accessing the member. [ 1.339494] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [ 1.347857] Mem abort info: [ 1.350742] ESR = 0x96000005 [ 1.353905] Exception class = DABT (current EL), IL = 32 bits [ 1.360024] SET = 0, FnV = 0 [ 1.363185] EA = 0, S1PTW = 0 [ 1.366431] Data abort info: [ 1.369405] ISV = 0, ISS = 0x00000005 [ 1.373363] CM = 0, WnR = 0 [ 1.376437] [0000000000000010] user address but active_mm is swapper [ 1.383005] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.388748] Modules linked in: [ 1.391897] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #344 [ 1.398625] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 1.404279] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 1.409221] pc : mtk_eint_find_irq+0x8/0x24 [ 1.413532] lr : mtk_gpio_to_irq+0x20/0x28 [ 1.417749] sp : ffffff800801baf0 [ 1.421161] x29: ffffff800801baf0 x28: ffffff8008792f40 [ 1.426637] x27: ffffff800886b000 x26: ffffff8008615620 [ 1.432113] x25: ffffffc00e4dbdc8 x24: ffffff80087b8000 [ 1.437589] x23: ffffffc00325a000 x22: ffffffc00325a010 [ 1.443066] x21: ffffffc0033dec18 x20: 00000000ffffffea [ 1.448542] x19: ffffffc00e4db800 x18: 0000000000000130 [ 1.454018] x17: 000000000000000e x16: 0000000000000007 [ 1.459494] x15: ffffff80085ee000 x14: 0000000000000001 [ 1.464970] x13: 0000000000000001 x12: 0000000000000010 [ 1.470446] x11: 0101010101010101 x10: 0000000000000880 [ 1.475922] x9 : ffffff800801b990 x8 : ffffffc0030688e0 [ 1.481399] x7 : ffffff80080c0660 x6 : ffffffc00e4dbbb0 [ 1.486875] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.492351] x3 : ffffff80082a92f4 x2 : 00000000fffffffa [ 1.497826] x1 : 0000000000000051 x0 : 0000000000000000 [ 1.503305] Process swapper/0 (pid: 1, stack limit = 0x0000000054e053bd) [ 1.510210] Call trace: [ 1.512727] mtk_eint_find_irq+0x8/0x24 [ 1.516677] mtk_gpio_to_irq+0x20/0x28 [ 1.520539] gpiod_to_irq+0x48/0x60 [ 1.524135] mmc_gpiod_request_cd_irq+0x3c/0xc4 [ 1.528804] mmc_start_host+0x6c/0x8c [ 1.532575] mmc_add_host+0x58/0x7c [ 1.536168] msdc_drv_probe+0x4fc/0x67c [ 1.540121] platform_drv_probe+0x58/0xa4 [ 1.544251] driver_probe_device+0x204/0x44c [ 1.548649] __driver_attach+0x84/0xf8 [ 1.552512] bus_for_each_dev+0x68/0xa0 [ 1.556461] driver_attach+0x20/0x28 [ 1.560142] bus_add_driver+0xec/0x240 [ 1.564002] driver_register+0x98/0xe4 [ 1.567863] __platform_driver_register+0x48/0x50 [ 1.572711] mt_msdc_driver_init+0x18/0x20 [ 1.576932] do_one_initcall+0x98/0x130 [ 1.580886] kernel_init_freeable+0x13c/0x1d4 [ 1.585375] kernel_init+0x10/0xf8 [ 1.588879] ret_from_fork+0x10/0x18 [ 1.592564] Code: a8c67bfd d65f03c0 a9bf7bfd 910003fd (f9400800) [ 1.598849] ---[ end trace 4bbcb7bc30e98492 ]--- [ 1.603677] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.603677] cc: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The function, external interrupt controller, is made as an optional to
mt7622 pinctrl. But if we don't want pio behaves as an external interrupt
controller, it would lead to hw->eint not be created properly and then
will cause 'kernel NULL pointer' issue when gpiochip try to call .to_irq
or .set_config. To fix it, check hw->eint before accessing the member.

[    1.339494] Unable to handle kernel NULL pointer dereference at virtual
	       address 00000010
[    1.347857] Mem abort info:
[    1.350742]   ESR = 0x96000005
[    1.353905]   Exception class = DABT (current EL), IL = 32 bits
[    1.360024]   SET = 0, FnV = 0
[    1.363185]   EA = 0, S1PTW = 0
[    1.366431] Data abort info:
[    1.369405]   ISV = 0, ISS = 0x00000005
[    1.373363]   CM = 0, WnR = 0
[    1.376437] [0000000000000010] user address but active_mm is swapper
[    1.383005] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[    1.388748] Modules linked in:
[    1.391897] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #344
[    1.398625] Hardware name: MediaTek MT7622 RFB1 board (DT)
[    1.404279] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    1.409221] pc : mtk_eint_find_irq+0x8/0x24
[    1.413532] lr : mtk_gpio_to_irq+0x20/0x28
[    1.417749] sp : ffffff800801baf0
[    1.421161] x29: ffffff800801baf0 x28: ffffff8008792f40
[    1.426637] x27: ffffff800886b000 x26: ffffff8008615620
[    1.432113] x25: ffffffc00e4dbdc8 x24: ffffff80087b8000
[    1.437589] x23: ffffffc00325a000 x22: ffffffc00325a010
[    1.443066] x21: ffffffc0033dec18 x20: 00000000ffffffea
[    1.448542] x19: ffffffc00e4db800 x18: 0000000000000130
[    1.454018] x17: 000000000000000e x16: 0000000000000007
[    1.459494] x15: ffffff80085ee000 x14: 0000000000000001
[    1.464970] x13: 0000000000000001 x12: 0000000000000010
[    1.470446] x11: 0101010101010101 x10: 0000000000000880
[    1.475922] x9 : ffffff800801b990 x8 : ffffffc0030688e0
[    1.481399] x7 : ffffff80080c0660 x6 : ffffffc00e4dbbb0
[    1.486875] x5 : 0000000000000000 x4 : 0000000000000000
[    1.492351] x3 : ffffff80082a92f4 x2 : 00000000fffffffa
[    1.497826] x1 : 0000000000000051 x0 : 0000000000000000
[    1.503305] Process swapper/0 (pid: 1, stack limit = 0x0000000054e053bd)
[    1.510210] Call trace:
[    1.512727]  mtk_eint_find_irq+0x8/0x24
[    1.516677]  mtk_gpio_to_irq+0x20/0x28
[    1.520539]  gpiod_to_irq+0x48/0x60
[    1.524135]  mmc_gpiod_request_cd_irq+0x3c/0xc4
[    1.528804]  mmc_start_host+0x6c/0x8c
[    1.532575]  mmc_add_host+0x58/0x7c
[    1.536168]  msdc_drv_probe+0x4fc/0x67c
[    1.540121]  platform_drv_probe+0x58/0xa4
[    1.544251]  driver_probe_device+0x204/0x44c
[    1.548649]  __driver_attach+0x84/0xf8
[    1.552512]  bus_for_each_dev+0x68/0xa0
[    1.556461]  driver_attach+0x20/0x28
[    1.560142]  bus_add_driver+0xec/0x240
[    1.564002]  driver_register+0x98/0xe4
[    1.567863]  __platform_driver_register+0x48/0x50
[    1.572711]  mt_msdc_driver_init+0x18/0x20
[    1.576932]  do_one_initcall+0x98/0x130
[    1.580886]  kernel_init_freeable+0x13c/0x1d4
[    1.585375]  kernel_init+0x10/0xf8
[    1.588879]  ret_from_fork+0x10/0x18
[    1.592564] Code: a8c67bfd d65f03c0 a9bf7bfd 910003fd (f9400800)
[    1.598849] ---[ end trace 4bbcb7bc30e98492 ]---
[    1.603677] Kernel panic - not syncing: Attempted to kill init!
	       exitcode=0x0000000b
[    1.603677]

cc: Kevin Hilman <khilman@baylibre.com>
Cc: stable@vger.kernel.org
Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mediatek: remove redundant return value check of platform_get_resource() 2018-06-18T05:55:56+00:00 Wei Yongjun weiyongjun1@huawei.com 2018-05-31T11:39:42+00:00 fb7298e1669ee84aa76f3483c91f1de4814aac11 Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mediatek: remove unused fields in struct mtk_eint_hw 2018-05-24T07:40:10+00:00 Sean Wang sean.wang@mediatek.com 2018-05-20T17:01:51+00:00 ca071afedb744bcedd2ef06803e99f5a54151ee7 The .name field has been not being used in existent code logic, so it's better that we remove them all. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The .name field has been not being used in existent code logic, so
it's better that we remove them all.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mediatek: use generic EINT register maps for each SoC 2018-05-24T07:39:25+00:00 Sean Wang sean.wang@mediatek.com 2018-05-20T17:01:50+00:00 e6612a69741f9a142fb0fc796d1f9cfb9037c56c So far, EINT on each SoC all used exactly identical register map and thus it's better that we apply generic register map already supported in EINT library and stop copy-n-pasting the same data block and filling into its platform data. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
So far, EINT on each SoC all used exactly identical register map and thus
it's better that we apply generic register map already supported in EINT
library and stop copy-n-pasting the same data block and filling into its
platform data.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: mediatek: add EINT support to MT7622 SoC 2018-05-24T07:38:13+00:00 Sean Wang sean.wang@mediatek.com 2018-05-20T17:01:49+00:00 e6dabd38d8e794903bf20ab4c94af8fc8709edda Add EINT support to MT7622 SoC and the support is made as just an option to MT7622 pinctrl. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Add EINT support to MT7622 SoC and the support is made as just an option
to MT7622 pinctrl.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>