linux.git/drivers/pinctrl/cirrus, branch v5.5

pinctrl: lochnagar: select GPIOLIB

2020-01-07T09:43:46+00:00

In a rare randconfig build I came across one configuration that does
not enable CONFIG_GPIOLIB, which is needed by lochnagar:

ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!
ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined!

Add another 'select' like all other pinctrl drivers have.

Fixes: 0548448b719a ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar")
Signed-off-by: Arnd Bergmann 
Link: https://lore.kernel.org/r/20191218163701.171914-1-arnd@arndb.de
Acked-by: Charles Keepax 
Signed-off-by: Linus Walleij

pinctrl: madera: Add configuration for Cirrus Logic CS47L92

2019-08-05T09:48:03+00:00

This adds the pinctrl configuration for the CS47L92 codec to
the madera pinctrl driver.

Signed-off-by: Charles Keepax 
Link: https://lore.kernel.org/r/20190722091015.20884-3-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij

pinctrl: madera: Add configuration for Cirrus Logic CS47L15

2019-08-05T09:47:14+00:00

This adds the pinctrl configuration for the CS47L15 codec to
the madera pinctrl driver.

Signed-off-by: Richard Fitzgerald 
Signed-off-by: Charles Keepax 
Link: https://lore.kernel.org/r/20190722091015.20884-2-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij

pinctrl: madera: Use local copy of pdata

2019-08-05T09:46:25+00:00

A local copy of the pdata exists and it should be used rather than
pulling a fresh copy.

Signed-off-by: Charles Keepax 
Link: https://lore.kernel.org/r/20190722091015.20884-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij

Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2019-07-13T22:02:27+00:00

Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.3 kernel cycle:

Core changes:

- Device links can optionally be added between a pin control producer
and its consumers. This will affect how the system power management
is handled: a pin controller will not suspend before all of its
consumers have been suspended.

This was necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense to make
this default in the long run.

Right now it is opt-in per driver.

- Drive strength can be specified in microamps. With decreases in
silicon technology, milliamps isn't granular enough, let's make it
possible to select drive strengths in microamps.

Right now the Meson (AMlogic) driver needs this.

New drivers:

- New subdriver for the Tegra 194 SoC.

- New subdriver for the Qualcomm SDM845.

- New subdriver for the Qualcomm SM8150.

- New subdriver for the Freescale i.MX8MN (Freescale is now a product
line of NXP).

- New subdriver for Marvell MV98DX1135.

Driver improvements:

- The Bitmain BM1880 driver now supports pin config in addition to
muxing.

- The Qualcomm drivers can now reserve some GPIOs as taken aside and
not usable for users. This is used in ACPI systems to take out some
GPIO lines used by the BIOS so that noone else (neither kernel nor
userspace) will play with them by mistake and crash the machine.

- A slew of refurbishing around the Aspeed drivers (board management
controllers for servers) in preparation for the new Aspeed AST2600
SoC.

- A slew of improvements over the SH PFC drivers as usual.

- Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
pinctrl: aspeed: Strip moved macros and structs from private header
pinctrl: aspeed: Fix missed include
pinctrl: baytrail: Use GENMASK() consistently
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
pinctrl: qcom: Add SM8150 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
dt-bindings: pinctrl: qcom: Document missing gpio nodes
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Correct comment that is no longer true
MAINTAINERS: Add entry for ASPEED pinctrl drivers
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Split bindings document in two
pinctrl: qcom: Add irq_enable callback for msm gpio
pinctrl: madera: Fixup SPDX headers
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
pinctrl: tegra: Add bitmask support for parked bits
...

pinctrl: madera: Fixup SPDX headers

2019-06-26T07:51:37+00:00

GPL-2.0-only is the preferred way of expressing v2 of the GPL, so switch
to that. Remove some redundant copyright notices and correct some
instances where the wrong comment type has been used in header files.

Signed-off-by: Charles Keepax 
Signed-off-by: Linus Walleij

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar

2019-04-04T05:09:30+00:00

Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.

Lochnagar provides many pins which can generally be used for an
audio function such as an AIF or a PDM interface, but also as
GPIOs.

Signed-off-by: Charles Keepax 
Reviewed-by: Linus Walleij 
Signed-off-by: Linus Walleij

pinctrl: remove pinctrl/machine.h inclusion from pinctrl/pinconf.h

2019-01-28T13:39:17+00:00

The change adds explicit inclusion of linux/pinctrl/machine.h header
to the only needed pinctrl-madera-core.c file, and therefore inclusion
of pinctrl/machine.h header from pinctrl/pinconf.h can be removed.

The change is preparatory to a follow-up reversal of commit f07512e615dd
("pinctrl/pinconfig: add debug interface").

Signed-off-by: Vladimir Zapolskiy 
Cc: Charles Keepax 
Reviewed-by Richard Fitzgerald 
Signed-off-by: Linus Walleij

pinctrl: madera: Fix uninitialized variable bug in madera_mux_set_mux

2018-10-12T09:14:38+00:00

There is a potential execution path in which variable *ret* is checked
in an IF statement, and then its value is used to report an error at
line 659 without being properly initialized previously:

659 if (ret)
660	dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret);

Fix this by initializing variable *ret* to 0 in order to
avoid unpredictable or unintended results.

Addresses-Coverity-ID: 1471969 ("Uninitialized scalar variable")
Fixes: 218d72a77b0b ("pinctrl: madera: Add driver for Cirrus Logic Madera codecs")
Signed-off-by: Gustavo A. R. Silva 
Acked-by: Charles Keepax 
Signed-off-by: Linus Walleij