linux.git/drivers/pinctrl/bcm, branch v6.10 Linux kernel source tree pinctrl: bcm2835: Fix permissions of persist_gpio_outputs 2024-06-17T07:49:36+00:00 Stefan Wahren wahrenst@gmx.net 2024-06-03T18:19:37+00:00 61fef29ad120d3077aeb0ef598d76822acb8c4cb The commit 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior configurable") unintentionally made the module parameter persist_gpio_outputs changeable at runtime. So drop the write permission in order to make the freeing behavior predictable for user applications. Fixes: 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior configurable") Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Closes: https://lore.kernel.org/linux-gpio/Zjk-C0nLmlynqLAE@surfacebook.localdomain/ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240603181938.76047-2-wahrenst@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The commit 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior
configurable") unintentionally made the module parameter
persist_gpio_outputs changeable at runtime. So drop the write permission
in order to make the freeing behavior predictable for user applications.

Fixes: 8ff05989b44e ("pinctrl: bcm2835: Make pin freeing behavior configurable")
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Closes: https://lore.kernel.org/linux-gpio/Zjk-C0nLmlynqLAE@surfacebook.localdomain/
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240603181938.76047-2-wahrenst@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm2835: Make pin freeing behavior configurable 2024-05-06T06:14:01+00:00 Stefan Wahren wahrenst@gmx.net 2024-05-03T06:27:45+00:00 8ff05989b44e1a8f7d2bbe67320990ebc2fbb5e5 Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN. So in case it was configured as GPIO_OUT before the configured output level also get lost. As long as GPIO sysfs was used this wasn't actually a problem because the pins and their possible output level were kept by sysfs. Since more and more Raspberry Pi users start using libgpiod they are confused about this behavior. So make the pin freeing behavior of GPIO_OUT configurable via module parameter. In case pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is kept. This patch based on the downstream work of Phil Elwell. Link: https://github.com/raspberrypi/linux/pull/6117 Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Message-ID: <20240503062745.11298-1-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Until now after a bcm2835 pin was freed its pinmux was set to GPIO_IN.
So in case it was configured as GPIO_OUT before the configured output
level also get lost. As long as GPIO sysfs was used this wasn't
actually a problem because the pins and their possible output level
were kept by sysfs.

Since more and more Raspberry Pi users start using libgpiod they are
confused about this behavior. So make the pin freeing behavior of
GPIO_OUT configurable via module parameter. In case
pinctrl-bcm2835.persist_gpio_outputs is set to 1, the output level is
kept.

This patch based on the downstream work of Phil Elwell.

Link: https://github.com/raspberrypi/linux/pull/6117
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20240503062745.11298-1-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm2835: Implement bcm2711_pinconf_get 2024-03-28T08:52:25+00:00 Stefan Wahren wahrenst@gmx.net 2024-03-07T07:01:13+00:00 d54e4cda297241406bed37af3f836d242184ec84 The BCM2711 allows to read the bias config. So implement pin_conf_get accordingly. The pull resistor values has been taken from the BCM2711/7211 datasheet. This implementation assumes that BCM7211 behaves the same way. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Message-ID: <20240307070113.4888-3-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
The BCM2711 allows to read the bias config. So implement pin_conf_get
accordingly. The pull resistor values has been taken from the
BCM2711/7211 datasheet.

This implementation assumes that BCM7211 behaves the same way.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-ID: <20240307070113.4888-3-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm2835: Implement bcm2835_pinconf_get 2024-03-28T08:52:25+00:00 Stefan Wahren wahrenst@gmx.net 2024-03-07T07:01:12+00:00 85b02bc0785b5e6326814af7e1b7528ce3a488ea Even the driver already has implemented pin_dbg_show, it could be helpful to implement pin_conf_get for a more generic behavior. Contrary to the BCM2711, the BCM2835 SOC doesn't allow to read the bias config, so the implementation is limited to the basics. Keep ENOTSUPP here, because it's only used internally. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Message-ID: <20240307070113.4888-2-wahrenst@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Even the driver already has implemented pin_dbg_show, it could
be helpful to implement pin_conf_get for a more generic behavior.
Contrary to the BCM2711, the BCM2835 SOC doesn't allow to read
the bias config, so the implementation is limited to the basics.

Keep ENOTSUPP here, because it's only used internally.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20240307070113.4888-2-wahrenst@gmx.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm: Convert to use grp member 2023-12-11T23:47:52+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2023-12-11T18:57:58+00:00 2a0674f25bf0f08e5756b5287205a30252b48796 Convert drivers to use grp member embedded in struct group_desc, because other members will be removed to avoid duplication and desynchronisation of the generic pin group description. Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231211190321.307330-6-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Convert drivers to use grp member embedded in struct group_desc,
because other members will be removed to avoid duplication and
desynchronisation of the generic pin group description.

Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231211190321.307330-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
treewide: rename pinctrl_gpio_free_new() 2023-11-04T09:23:21+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2023-10-03T09:57:17+00:00 4fccb263f3a0dc07b306213930e0c25d1c9002b0 Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new' suffix from its improved variant. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> 
Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new'
suffix from its improved variant.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
treewide: rename pinctrl_gpio_request_new() 2023-11-04T09:23:21+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2023-10-03T09:56:03+00:00 acb38be654f9af05fe626b37ea83e119cd310c3c Now that pinctrl_gpio_request() is no longer used, let's drop the '_new' suffix from its improved variant. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> 
Now that pinctrl_gpio_request() is no longer used, let's drop the '_new'
suffix from its improved variant.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: bcm: use new pinctrl GPIO helpers 2023-11-04T09:23:19+00:00 Bartosz Golaszewski bartosz.golaszewski@linaro.org 2023-10-03T07:55:27+00:00 0bea3e7c157f6a1622c5b71eb8972502bd9b3241 Replace the pinctrl helpers taking the global GPIO number as argument with the improved variants that instead take a pointer to the GPIO chip and the controller-relative offset. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> 
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: Use device_get_match_data() 2023-10-30T13:50:42+00:00 Rob Herring robh@kernel.org 2023-10-09T17:29:13+00:00 63bffc2d3a99eaabc786c513eea71be3f597f175 Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231009172923.2457844-18-robh@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231009172923.2457844-18-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl: nsp-gpio: Silence probe deferral messages 2023-08-10T08:41:20+00:00 Florian Fainelli florian.fainelli@broadcom.com 2023-08-08T18:07:33+00:00 c9b2572f488c3ed3974a0ff6885bb059b1751c86 We can have gpiochip_add_data() return -EPROBE_DEFER which will make us produce the "unable to add GPIO chip" message which is confusing. Use dev_err_probe() to silence probe deferral messages. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230808180733.2081353-3-florian.fainelli@broadcom.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
We can have gpiochip_add_data() return -EPROBE_DEFER which will make
us produce the "unable to add GPIO chip" message which is confusing.
Use dev_err_probe() to silence probe deferral messages.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230808180733.2081353-3-florian.fainelli@broadcom.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>