Pull driver core updates from Greg KH:
 "Here is a small set of driver core changes for 6.13-rc1.

  Nothing major for this merge cycle, except for the two simple merge
  conflicts are here just to make life interesting.

  Included in here are:

   - sysfs core changes and preparations for more sysfs api cleanups
     that can come through all driver trees after -rc1 is out

   - fw_devlink fixes based on many reports and debugging sessions

   - list_for_each_reverse() removal, no one was using it!

   - last-minute seq_printf() format string bug found and fixed in many
     drivers all at once.

   - minor bugfixes and changes full details in the shortlog"

* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
  Fix a potential abuse of seq_printf() format string in drivers
  cpu: Remove spurious NULL in attribute_group definition
  s390/con3215: Remove spurious NULL in attribute_group definition
  perf: arm-ni: Remove spurious NULL in attribute_group definition
  driver core: Constify bin_attribute definitions
  sysfs: attribute_group: allow registration of const bin_attribute
  firmware_loader: Fix possible resource leak in fw_log_firmware_info()
  drivers: core: fw_devlink: Fix excess parameter description in docstring
  driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
  cacheinfo: Use of_property_present() for non-boolean properties
  cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
  drivers: core: fw_devlink: Make the error message a bit more useful
  phy: tegra: xusb: Set fwnode for xusb port devices
  drm: display: Set fwnode for aux bus devices
  driver core: fw_devlink: Stop trying to optimize cycle detection logic
  driver core: Constify attribute arguments of binary attributes
  sysfs: bin_attribute: add const read/write callback variants
  sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
  sysfs: treewide: constify attribute callback of bin_attribute::llseek()
  sysfs: treewide: constify attribute callback of bin_attribute::mmap()
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.13-rc1.

  Overall, a pretty slow development cycle, the majority of the work
  going into the debugfs interface for the thunderbolt (i.e. USB4) code,
  to help with debugging the myrad ways that hardware vendors get their
  interfaces messed up. Other than that, here's the highlights:

   - thunderbolt changes and additions to debugfs interfaces

   - lots of device tree updates for new and old hardware

   - UVC configfs gadget updates and new apis for features

   - xhci driver updates and fixes

   - dwc3 driver updates and fixes

   - typec driver updates and fixes

   - lots of other small updates and fixes, full details in the shortlog

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
  usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property
  dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property
  dt-bindings: connector: Add time property for Sink BC12 detection completion
  usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb
  usb: dwc3: gadget: Cleanup SG handling
  usb: dwc3: gadget: Fix looping of queued SG entries
  usb: dwc3: gadget: Fix checking for number of TRBs left
  usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED
  Revert "usb: gadget: composite: fix OS descriptors w_value logic"
  usb: ehci-spear: fix call balance of sehci clk handling routines
  USB: make to_usb_device_driver() use container_of_const()
  USB: make to_usb_driver() use container_of_const()
  USB: properly lock dynamic id list when showing an id
  USB: make single lock for all usb dynamic id lists
  drivers/usb/storage: refactor min with min_t
  drivers/usb/serial: refactor min with min_t
  drivers/usb/musb: refactor min/max with min_t/max_t
  drivers/usb/mon: refactor min with min_t
  drivers/usb/misc: refactor min with min_t
  drivers/usb/host: refactor min/max with min_t/max_t
  ...

Pull phy updates from Vinod Koul:
 "New hardware support:

   - ST STM32MP25 combophy support

   - Sparx5 support for lan969x serdes and updates to driver to support
     this

   - NXP PTN3222 eUSB2 to USB2 redriver

   - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
     support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
     UFS PHY support and SA8775P eDP PHY support

   - Rockchip rk3576 usbdp and rk3576 usb2 phy support

   - Binding for Microchip ATA6561 can phy

  Updates:

   - Freescale driver updates from hdmi support

   - Conversion of rockchip rk3228 hdmi phy binding to yaml

   - Broadcom usb2-phy deprecated support dropped and USB init array
     update for BCM4908

   - TI USXGMII mode support in J7200

   - Switch back to platform_driver::remove() subsystem update"

* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
  phy: qcom: qmp: Fix lecacy-legacy typo
  phy: lan969x-serdes: add support for lan969x serdes driver
  dt-bindings: phy: sparx5: document lan969x
  phy: sparx5-serdes: add support for branching on chip type
  phy: sparx5-serdes: add indirection layer to register macros
  phy: sparx5-serdes: add function for getting the CMU index
  phy: sparx5-serdes: add ops to match data
  phy: sparx5-serdes: add constant for the number of CMU's
  phy: sparx5-serdes: add constants to match data
  phy: sparx5-serdes: add support for private match data
  phy: bcm-ns-usb2: drop support for old binding variant
  dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
  dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
  phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
  phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
  phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
  phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
  phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
  ...

fwnode needs to be set for a device for fw_devlink to be able to
track/enforce its dependencies correctly. Without this, you'll see error
messages like this when the supplier has probed and tries to make sure
all its fwnode consumers are linked to it using device links:

tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180) with 1-0008

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/all/20240910130019.35081-1-jonathanh@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241024061347.1771063-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need the USB fixes in here as well, and this resolves a merge
conflict in:
	drivers/usb/typec/tcpm/tcpm.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20241101150730.090dc30f@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In rtk_usb3phy_probe() devm_kzalloc() may return NULL
but this returned value is not checked.

Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20241025070744.149070-1-hanchunchao@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In rtk_usb2phy_probe() devm_kzalloc() may return NULL
but this returned value is not checked.

Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20241025065912.143692-1-hanchunchao@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduced in Commit b3982f2144e1 ("phy: qcom-qmp-combo: restructure
PHY creation"). No functional changes.

Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240903-topic-qmp_typo-v1-1-781e81799992@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Add support for lan969x SERDES driver. Lan969x has ten 10G SERDES'es
which share the same features and data rates as the Sparx5 SERDES'es.

Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-9-d695bcb57b84@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

In preparation for lan969x, add a way to branch out on code that is to
be executed on either Sparx5 or lan969x.  Initially, this is required to
branch out when checking the SERDES types and SERDES speeds, since the
handling of these differ on the two platforms. This will also be used by
the lan969x driver introduced in a subsequent patch.

Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-7-d695bcb57b84@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>