linux.git/drivers/phy, branch v6.6-rc2 Linux kernel source tree Merge tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy 2023-09-03T17:38:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-09-03T17:38:02+00:00 db906f0ca6bb55b7237b880e06ec2fc95ab67e16 Pull phy updates from Vinod Koul: "As usual a couple of new drivers, a bunch of new device support and few updates to existing drivers New Support: - Starfive dphy rx, JH7110 usb and pcie support - Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support - Qualcomm sa8775p PCIe support, M31 USB PHY driver - Samsung Exynos850 usb support Updates: - Mediatek dsi driver clock updates - Qualcomm sm8150 combo phy with reworking of qmp pcie driver - Xilinx zynqmp runtime PM support" * tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits) phy: exynos5-usbdrd: Add Exynos850 support phy: exynos5-usbdrd: Add 26MHz ref clk support phy: exynos5-usbdrd: Make it possible to pass custom phy ops dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support phy: qcom-qmp-combo: fix clock probing phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs phy: qcom-qmp-pcie: populate offsets configuration phy: qcom-qmp-pcie: simplify clock handling phy: qcom-qmp-pcie: keep offset tables sorted phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed phy: qcom: Introduce M31 USB PHY driver dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy phy: rockchip: inno-dsidphy: Add rv1126 support dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126 dt-bindings: phy: mediatek,tphy: allow simple nodename pattern phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning ... 
Pull phy updates from Vinod Koul:
 "As usual a couple of new drivers, a bunch of new device support and
  few updates to existing drivers

  New Support:
   - Starfive dphy rx, JH7110 usb and pcie support
   - Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support
   - Qualcomm sa8775p PCIe support, M31 USB PHY driver
   - Samsung Exynos850 usb support

  Updates:
   - Mediatek dsi driver clock updates
   - Qualcomm sm8150 combo phy with reworking of qmp pcie driver
   - Xilinx zynqmp runtime PM support"

* tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits)
  phy: exynos5-usbdrd: Add Exynos850 support
  phy: exynos5-usbdrd: Add 26MHz ref clk support
  phy: exynos5-usbdrd: Make it possible to pass custom phy ops
  dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support
  phy: qcom-qmp-combo: fix clock probing
  phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs
  phy: qcom-qmp-pcie: populate offsets configuration
  phy: qcom-qmp-pcie: simplify clock handling
  phy: qcom-qmp-pcie: keep offset tables sorted
  phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config
  dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs
  dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
  phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed
  phy: qcom: Introduce M31 USB PHY driver
  dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  phy: rockchip: inno-dsidphy: Add rv1126 support
  dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126
  dt-bindings: phy: mediatek,tphy: allow simple nodename pattern
  phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning
  phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning
  ...
Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb 2023-09-01T16:23:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-09-01T16:23:34+00:00 51e7accbe8ab51476fbe55fbb5616c12fb3a0beb Pull USB / Thunderbolt / PHY driver updates from Greg KH: "Here is the big set of USB, Thunderbolt, and PHY driver updates for 6.6-rc1. Included in here are: - PHY driver additions and cleanups - Thunderbolt minor additions and fixes - USB MIDI 2 gadget support added - dwc3 driver updates and additions - Removal of some old USB wireless code that was missed when that codebase was originally removed a few years ago, cleaning up some core USB code paths - USB core potential use-after-free fixes that syzbot from different people/groups keeps tripping over - typec updates and additions - gadget fixes and cleanups - loads of smaller USB core and driver cleanups all over the place Full details are in the shortlog. All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) platform/chrome: cros_ec_typec: Configure Retimer cable type tcpm: Avoid soft reset when partner does not support get_status usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: set initial svdm version based on pd revision USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) usb: dwc2: add pci_device_id driver_data parse support usb: gadget: remove max support speed info in bind operation usb: gadget: composite: cleanup function config_ep_by_speed_and_alt() usb: gadget: config: remove max speed check in usb_assign_descriptors() usb: gadget: unconditionally allocate hs/ss descriptor in bind operation usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind() usb: gadget: add a inline function gether_bitrate() usb: gadget: use working speed to calcaulate network bitrate and qlen dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support usb: dwc3: exynos: Add support for Exynos850 variant usb: gadget: udc-xilinx: fix incorrect type in assignment warning usb: gadget: udc-xilinx: fix cast from restricted __le16 warning usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning USB: dwc2: hande irq on dead controller correctly ... 
Pull USB / Thunderbolt / PHY driver updates from Greg KH:
 "Here is the big set of USB, Thunderbolt, and PHY driver updates for
  6.6-rc1. Included in here are:

   - PHY driver additions and cleanups

   - Thunderbolt minor additions and fixes

   - USB MIDI 2 gadget support added

   - dwc3 driver updates and additions

   - Removal of some old USB wireless code that was missed when that
     codebase was originally removed a few years ago, cleaning up some
     core USB code paths

   - USB core potential use-after-free fixes that syzbot from different
     people/groups keeps tripping over

   - typec updates and additions

   - gadget fixes and cleanups

   - loads of smaller USB core and driver cleanups all over the place

  Full details are in the shortlog. All of these have been in linux-next
  for a while with no reported problems"

* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  platform/chrome: cros_ec_typec: Configure Retimer cable type
  tcpm: Avoid soft reset when partner does not support get_status
  usb: typec: tcpm: reset counter when enter into unattached state after try role
  usb: typec: tcpm: set initial svdm version based on pd revision
  USB: serial: option: add FOXCONN T99W368/T99W373 product
  USB: serial: option: add Quectel EM05G variant (0x030e)
  usb: dwc2: add pci_device_id driver_data parse support
  usb: gadget: remove max support speed info in bind operation
  usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
  usb: gadget: config: remove max speed check in usb_assign_descriptors()
  usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
  usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
  usb: gadget: add a inline function gether_bitrate()
  usb: gadget: use working speed to calcaulate network bitrate and qlen
  dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
  usb: dwc3: exynos: Add support for Exynos850 variant
  usb: gadget: udc-xilinx: fix incorrect type in assignment warning
  usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
  usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
  USB: dwc2: hande irq on dead controller correctly
  ...
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2023-08-31T02:53:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-08-31T02:53:39+00:00 f8fd5c24830fbc259ba7d5e72817c9867c01b8e8 Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ... 
Pull clk subsystem updates from Stephen Boyd:
 "This pull request is full of clk driver changes. In fact, there aren't
  any changes to the clk framework this time around. That's probably
  because everyone was on vacation (yours truly included). We did lose a
  couple clk drivers this time around because nobody was using those
  devices. That skews the diffstat a bit, but either way, nothing looks
  out of the ordinary here. The usual suspects are chugging along adding
  support for more SoCs and fixing bugs.

  If I had to choose, I'd say the theme for the past few months has been
  "polish". There's quite a few patches that migrate to
  devm_platform_ioremap_resource() in here. And there's more than a
  handful of patches that move the NR_CLKS define from the DT binding
  header to the driver. There's even patches that migrate drivers to use
  clk_parent_data and clk_hw to describe clk tree topology. It seems
  that the spring (summer?) cleaning bug got some folks, or the
  semiconductor shortage finally hit the software side.

  New Drivers:
   - StarFive JH7110 SoC clock drivers
   - Qualcomm IPQ5018 Global Clock Controller driver
   - Versa3 clk generator to support 48KHz playback/record with audio
     codec on RZ/G2L SMARC EVK

  Removed Drivers:
   - Remove non-OF mmp clk drivers
   - Remove OXNAS clk driver

  Updates:
   - Add __counted_by to struct clk_hw_onecell_data and struct
     spmi_pmic_div_clk_cc
   - Move defines for numbers of clks (NR_CLKS) from DT headers to
     drivers
   - Introduce kstrdup_and_replace() and use it
   - Add PLL rates for Rockchip rk3568
   - Add the display clock tree for Rockchip rv1126
   - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
     RZ/G2 SoCs
   - Convert sun9i-mmc clock to use
     devm_platform_get_and_ioremap_resource()
   - Fix function name in a comment in ccu_mmc_timing.c
   - Parameter name correction for ccu_nkm_round_rate()
   - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
     consider alternative parent rates when determining clock rates
   - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
   - Support finding closest (as opposed to closest but not higher)
     clock rate for NM, NKM, mux and div type clocks, as use it for
     Allwinner A64 pll-video0
   - Prefer current parent rate if able to generate ideal clock rate for
     Allwinner NKM clocks
   - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
     moved out to the interconnect drivers
   - Fix various PM runtime bugs across many Qualcomm clk drivers
   - Migrate Qualcomm MDM9615 is to parent_hw and parent_data
   - Add network related resets on Qualcomm IPQ4019
   - Add a couple missing USB related clocks to Qualcomm IPQ9574
   - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
     controller
   - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
     and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
     corrected
   - Add missing GDSCs to and correct GDSCs for the SC8280XP global
     clock controller driver
   - Support retention for the Qualcomm SC8280XP display clock
     controller GDSCs.
   - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
     to fix issues with missing parent clocks across sc7180, sm7150,
     sm6350 and sm8250, while sm8450 is corrected to use floor ops
   - Correct Qualcomm SM6350 GPU clock controller's clock supplies
   - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
   - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
   - Change the delay in the Qualcomm reset controller to fsleep() for
     correctness
   - Extend the Qualcomm SM83550 Video clock controller to support
     SC8280XP
   - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
     R-Car H3, M3-W, and M3-N SoCs
   - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
   - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
   - Add the PDM IPC clock for i.MX93
   - Add 519.75MHz frequency support for i.MX9 PLL
   - Simplify the .determine_rate() implementation for i.MX GPR mux
   - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
   - Add the audio mux clock to i.MX8
   - Fix the SPLL2 MULT range for PLLv4
   - Update the SPLL2 type in i.MX8ULP
   - Fix the SAI4 clock on i.MX8MP
   - Add silicon revision print for i.MX25 on clocks init
   - Drop the return value from __mx25_clocks_init()
   - Fix the clock pauses on no-op set_rate for i.MX8M composite clock
   - Drop restrictions for i.MX PLL14xx and fix its max prediv value
   - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
     allow glitch free switching"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
  clk: qcom: Fix SM_GPUCC_8450 dependencies
  clk: lmk04832: Support using PLL1_LD as SPI readback pin
  clk: lmk04832: Don't disable vco clock on probe fail
  clk: lmk04832: Set missing parent_names for output clocks
  clk: mvebu: Convert to devm_platform_ioremap_resource()
  clk: nuvoton: Convert to devm_platform_ioremap_resource()
  clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
  clk: ti: Use devm_platform_get_and_ioremap_resource()
  clk: mediatek: Convert to devm_platform_ioremap_resource()
  clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
  clk: gemini: Convert to devm_platform_ioremap_resource()
  clk: fsl-sai: Convert to devm_platform_ioremap_resource()
  clk: bm1880: Convert to devm_platform_ioremap_resource()
  clk: axm5516: Convert to devm_platform_ioremap_resource()
  clk: actions: Convert to devm_platform_ioremap_resource()
  clk: cdce925: Remove redundant of_match_ptr()
  clk: pxa910: Move number of clocks to driver source
  clk: pxa1928: Move number of clocks to driver source
  clk: pxa168: Move number of clocks to driver source
  clk: mmp2: Move number of clocks to driver source
  ...
clk: Annotate struct clk_hw_onecell_data with __counted_by 2023-08-22T20:51:26+00:00 Kees Cook keescook@chromium.org 2023-08-17T20:30:22+00:00 f316cdff8d677db9ad9c90acb44c4cd535b0ee27 Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data. Additionally, since the element count member must be set before accessing the annotated flexible array member, move its initialization earlier. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Taichi Sugaya <sugaya.taichi@socionext.com> Cc: Takao Orito <orito.takao@socionext.com> Cc: Qin Jian <qinjian@cqplus1.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Samuel Holland <samuel@sholland.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-sunxi@lists.linux.dev Cc: linux-phy@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct clk_hw_onecell_data.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Takao Orito <orito.takao@socionext.com>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-sunxi@lists.linux.dev
Cc: linux-phy@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230817203019.never.795-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
phy: exynos5-usbdrd: Add Exynos850 support 2023-08-22T14:11:15+00:00 Sam Protsenko semen.protsenko@linaro.org 2023-08-19T03:17:29+00:00 691525074db97d9b684dd1457fd8dc9842a36615 Implement Exynos850 USB 2.0 DRD PHY controller support. Exynos850 has quite a different PHY controller than Exynos5 compatible controllers, but it's still possible to implement it on top of existing exynos5-usbdrd driver infrastructure. Only UTMI+ (USB 2.0) PHY interface is implemented, as Exynos850 doesn't support USB 3.0. Only two clocks are used for this controller: - phy: bus clock, used for PHY registers access - ref: PHY reference clock (OSCCLK) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-7-semen.protsenko@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Implement Exynos850 USB 2.0 DRD PHY controller support. Exynos850 has
quite a different PHY controller than Exynos5 compatible controllers,
but it's still possible to implement it on top of existing
exynos5-usbdrd driver infrastructure.

Only UTMI+ (USB 2.0) PHY interface is implemented, as Exynos850 doesn't
support USB 3.0.

Only two clocks are used for this controller:
  - phy: bus clock, used for PHY registers access
  - ref: PHY reference clock (OSCCLK)

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-7-semen.protsenko@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: exynos5-usbdrd: Add 26MHz ref clk support 2023-08-22T14:11:15+00:00 Sam Protsenko semen.protsenko@linaro.org 2023-08-19T03:17:28+00:00 255ec3879dd4d585799fd8d8a94a335eaf84d2ec Modern Exynos chips (like Exynos850) might have 26 MHz OSCCLK external clock, which is also used as a PHY reference clock. For some USB PHY controllers (e.g USB DRD PHY block on Exynos850) there is no need to set the refclk frequency at all (and corresponding bits in CLKRSTCTRL[7:5] are marked RESERVED), so that value won't be set in the driver. But even in that case, 26 MHz support still has to be added, otherwise exynos5_rate_to_clk() fails, which leads in turn to probe error. Add the correct value for 26MHz refclk to make it possible to add support for new Exynos USB DRD PHY controllers. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-6-semen.protsenko@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Modern Exynos chips (like Exynos850) might have 26 MHz OSCCLK external
clock, which is also used as a PHY reference clock. For some USB PHY
controllers (e.g USB DRD PHY block on Exynos850) there is no need to set
the refclk frequency at all (and corresponding bits in CLKRSTCTRL[7:5]
are marked RESERVED), so that value won't be set in the driver. But
even in that case, 26 MHz support still has to be added, otherwise
exynos5_rate_to_clk() fails, which leads in turn to probe error.

Add the correct value for 26MHz refclk to make it possible to add
support for new Exynos USB DRD PHY controllers.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-6-semen.protsenko@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: exynos5-usbdrd: Make it possible to pass custom phy ops 2023-08-22T14:11:15+00:00 Sam Protsenko semen.protsenko@linaro.org 2023-08-19T03:17:27+00:00 6b34ec66e7e7351b9a0a1eba8f57eb46ddeabf1e Provide a way to use different PHY ops for different chips. Right now all chips are using exynos5_usbdrd_phy_ops, but it won't always be the case. For example, Exynos850 has very different USB PHY block, so there will be another PHY ops implementation for that chip. No functional change. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-5-semen.protsenko@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Provide a way to use different PHY ops for different chips. Right now
all chips are using exynos5_usbdrd_phy_ops, but it won't always be the
case. For example, Exynos850 has very different USB PHY block, so there
will be another PHY ops implementation for that chip.

No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230819031731.22618-5-semen.protsenko@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-combo: fix clock probing 2023-08-22T14:05:13+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-08-20T23:58:13+00:00 b83eb8ba2ab9551217ed36320b8999db2f351e57 During rebase of qcom-qmp-combo series a call to devm_clk_bulk_get_all() got moved by git from qmp_combo_parse_dt_legacy() to phy_dp_clks_register(). This doesn't have any serious effect, since the clocks will be set in both legacy and non-legacy paths. However let's move it back to place anyway, to prevent the driver from fetching clocks twice. Fixes: 28e265bf84a8 ("phy: qcom-qmp-combo: simplify clock handling") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820235813.562284-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
During rebase of qcom-qmp-combo series a call to devm_clk_bulk_get_all()
got moved by git from qmp_combo_parse_dt_legacy() to
phy_dp_clks_register(). This doesn't have any serious effect, since the
clocks will be set in both legacy and non-legacy paths. However let's
move it back to place anyway, to prevent the driver from fetching clocks
twice.

Fixes: 28e265bf84a8 ("phy: qcom-qmp-combo: simplify clock handling")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230820235813.562284-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs 2023-08-22T14:03:37+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-08-20T14:20:24+00:00 4807ff70e228b5e9c6ea6c7c5651a3fd74a5cfda Reuse sm8250 configuration to add support for both single lane and dual lane PCIe PHYs on the Qualcomm SM8150 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Reuse sm8250 configuration to add support for both single lane and dual
lane PCIe PHYs on the Qualcomm SM8150 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230820142035.89903-8-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
phy: qcom-qmp-pcie: populate offsets configuration 2023-08-22T14:03:37+00:00 Dmitry Baryshkov dmitry.baryshkov@linaro.org 2023-08-20T14:20:23+00:00 bf46fa1dafacebedb9de56626fdfa71e6198cfd7 Populate offsets configuration for the rest of UFS PHYs to make it possible to switch them to the new (single-node) bindings style. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230820142035.89903-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> 
Populate offsets configuration for the rest of UFS PHYs to make it
possible to switch them to the new (single-node) bindings style.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230820142035.89903-7-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>