linux.git/drivers/phy, branch v4.4-rc2

Merge tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-11-05T05:26:27+00:00

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.4-rc1.

  As usual, most of the changes are in the gadget subsystem, and we
  removed a host controller for a device that is no longer in existance,
  and probably never was even made public.  There is also other minor
  driver updates and new device ids, full details in the changelog.

  All of these have been in linux-next for a while"

* tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits)
  USB: core: Codestyle fix in urb.c
  usb: misc: usb3503: Use i2c_add_driver helper macro
  usb: host: lpc32xx: don't unregister phy device
  usb: host: lpc32xx: balance clk enable/disable on removal
  usb: host: lpc32xx: fix warnings caused by enabling unprepared clock
  uwb: drp: Use setup_timer
  uwb: neh: Use setup_timer
  uwb: rsv: Use setup_timer
  USB: qcserial: add Sierra Wireless MC74xx/EM74xx
  usb: chipidea: otg: don't wait vbus drops below BSV when starts host
  chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()
  doc: dt-binding: ci-hdrc-usb2: split vendor specific properties
  usb: chipidea: imx: add imx6ul usb support
  doc: dt-binding: ci-hdrc-usb2: improve property description
  usb: chipidea: imx: add usb support for imx7d
  Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry
  usb: chipidea: Add support for 'phy-clkgate-delay-us' property
  usb: chipidea: Use extcon framework for VBUS and ID detect
  usb: gadget: net2280: restore ep_cfg after defect7374 workaround
  usb: dwc2: host: Fix use after free w/ simultaneous irqs
  ...

Merge tag 'v4.3-rc6' into locking/core, to pick up fixes before applying new changes

2015-10-20T08:16:46+00:00

Signed-off-by: Ingo Molnar

Merge tag 'phy-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2015-10-18T03:12:19+00:00

Kishon writes:

phy: for 4.4

*) Add new PHY driver for Broadcom's cygnus PCIe PHY
*) Add USB3 PHY driver for mediatek's SoCs
*) Add VBUS regulator support for Samsung's exynos PHY
*) Misc cleanup

Signed-off-by: Kishon Vijay Abraham I

phy: cygnus: pcie: Add Cygnus PCIe PHY support

2015-10-06T14:51:48+00:00

This patch adds the PCIe PHY support for the Broadcom PCIe RC interface
on Cygnus

Signed-off-by: Ray Jui 
Reviewed-by: Arun Parameswaran 
Reviewed-by: JD (Jiandong) Zheng 
Reviewed-by: Scott Branden 
Signed-off-by: Kishon Vijay Abraham I

phy: sun4i-usb: Use devm_gpiod_get_optional for optional GPIOs

2015-10-06T14:51:47+00:00

Both data->id_det_gpio and data->vbus_det_gpio are optional, so use
devm_gpiod_get_optional for them.

Signed-off-by: Axel Lin 
Reviewed-by: Hans de Goede 
Signed-off-by: Kishon Vijay Abraham I

phy: add usb3.0 phy driver for mt65xx SoCs

2015-10-06T14:51:47+00:00

support usb3.0 phy of mt65xx SoCs

Signed-off-by: Chunfeng Yun 
Signed-off-by: Kishon Vijay Abraham I

phy: exynos-usb2: add vbus regulator support

2015-10-06T14:51:47+00:00

Exynos USB2 PHY has separate power supply, which is usually provided by
VBUS regulator. This patch adds support for it. VBUS regulator is
optional, to keep compatibility with boards, which have VBUS provided
from some always-on power source.

Signed-off-by: Marek Szyprowski 
Tested-by: Krzysztof Kozlowski 
Signed-off-by: Kishon Vijay Abraham I

phy: berlin-sata: Fix module autoload for OF platform driver

2015-09-25T11:31:14+00:00

This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt 
Signed-off-by: Kishon Vijay Abraham I

phy: rockchip-usb: power down phy when rockchip phy probe

2015-09-25T11:31:14+00:00

rockchip phy are enable when soc reset, to save power consumption,
we disable it when probe, and enable each phy when it use

Signed-off-by: huang lin 
Signed-off-by: Kishon Vijay Abraham I

phy: qcom-ufs: fix build error when the component is built as a module

2015-09-25T11:31:14+00:00

Export the following functions in order to avoid build errors
when the component PHY_QCOM_UFS is compiled as a module:

ERROR: "ufs_qcom_phy_disable_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_is_pcs_ready"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_disable_iface_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_start_serdes"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_calibrate_phy"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_dev_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_set_tx_lane_enable"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_disable_dev_ref_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_save_controller_version"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
ERROR: "ufs_qcom_phy_enable_iface_clk"
	[drivers/scsi/ufs/ufs-qcom.ko] undefined!
make[1]: *** [__modpost] Error 1

Signed-off-by: Yaniv Gardi 
Signed-off-by: Kishon Vijay Abraham I