Pull gpio updates from Bartosz Golaszewski:
 "GPIO core:
   - extend the gpio-regmap abstraction layer with more features
     allowing users to override configuration setting, translate
     register values and masks and enable/disable interrupts
   - extend GPIO kunit tests with suites verifying probe ordering by
     software node devlink support and software node hogs
   - shrink GPIO kunit initialization code
   - coding style updates (remove commas from sentinels where
     applicable)
   - with all users now converted treewide to using real firmware node
     links for software node GPIO lookup: remove the deprecated
     label-matching mechanism from from GPIO core
   - drop redundant return value check of nonseekable_open() in
     gpiolib-cdev
   - use IRQ trigger helpers where applicable

  Driver updates:
   - refactor error paths and logging in gpio-nomadik
   - use more modern interfaces for getting resources in gpio-rockchip,
     gpio-bt8xx and gpio-pca9570
   - add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
   - drop unused FILONOFF macro from gpio-rcar
   - extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
   - only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
     avoid bloating the build
   - refactor coding style in several drivers
   - use correct endianess translation in gpio-pcf85x
   - add wake-up interrupt support to gpio-mvebu
   - apply initial value in direction output setter in gpio-by-pinctrl

  Misc:
   - replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
     which now exports all the deprecated APIs
   - select GPIOLIB_LEGACY in Kconfig where required treewide
   - use software nodes for gpio-keys in MFD drivers

  Devicetree bindings:
   - describe the realtek rtd1625 GPIO controller
   - document new models for gpio-pca95xx and gpio-cadence
   - document new property in gpio-rockchip"

* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
  gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
  dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
  gpio: Use IRQ trigger mask helpers
  gpio: allow COMPILE_TEST for IOPORT drivers
  gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
  gpio: regmap: Add IRQ enable/disable helpers
  gpio: regmap: Add set_config callback
  gpio: regmap: Add value_xlate callback
  gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
  gpio: regmap: Order kernel-doc descriptions with the actual appearance
  gpio: regmap: Apply default resource callbacks for regmap IRQ chip
  gpio: regmap: Provide default IRQ resource request and release callbacks
  Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
  gpib: gpio: replace linux/gpio.h inclusion
  Input: matrix_keyboard - replace linux/gpio.h inclusion
  phy: replace linux/gpio.h inclusions
  pcmcia: replace linux/gpio.h inclusions
  ASoC: replace linux/gpio.h inclusions
  mfd: replace linux/gpio.h inclusions
  sh: replace linux/gpio.h inclusions
  ...

Pull SoC driver updates from Arnd Bergmann:
 "The SoC driver changes once more consist of many small fixes and
  cleanups, that are to a large part the result of automated testing.

  On platform specific drivers, this includes SoC specific code for
  xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
  rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
  picture for SCMI and qcomtee.

  Aside from these, we see actual new hardware support in a few areas:

   - The Apple platform gets a new driver for low power states

   - Updates to Qualcomm platform drivers add several new hardware
     specific features and additional SoCs.

   - Amlogic SoC support for A1 and T7 is added

   - The Mediatek MMSYS driver is refactored as a cleanup"

* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
  soc: qcom: make QCOM_PDR_MSG selectable
  soc: qcom: ubwc: Fix missing include
  soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
  media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
  drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
  dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
  firmware: xilinx: Clear firmware notifiers across kexec transitions
  firmware: xilinx: Release all peripheral devices from firmware
  firmware: xilinx: Add support to clear EL3 PM state
  firmware: xilinx: Propagate actual error from feature check
  firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
  bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
  soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
  phy: lynx-10g: use RCW override procedure for dynamic protocol change
  soc: fsl: guts: implement the RCW override procedure
  dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
  soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
  soc: fsl: guts: make it easier to determine on which SoC we are running
  soc: fsl: guts: add a central fsl_guts_read() function
  soc: fsl: guts: add a global structure to hold state
  ...

Linux 7.2

FSL SOC Changes for 7.3

Freescale QUICC Engine:
- Use generic I/O helpers in interrupt controller for IO Ports
- Move CONFIG_QE_GPIO out of powerpc
- Fix DT scan for GPIO nodes
- Convert IO ports interrupt controller to generic IRQ chip
- Add support of IRQs in GPIO controller
- Implement get_direction() in GPIO controller
- Check platform_driver_register() in interrupt controller for IO Ports

Data Path I/O:
- Replace maintainer
- Remove redundant dev_err()
- Fix kernel-doc typos

Freescale Management Complex:
- Use strscpy() to copy strings into arrays
- Remove redundant dev_err()
- Drop unused assignment of acpi_device_id::driver_data

Other changes:
- Add kernel and device tree binding support for RCW override,
completing the SerDes PHY driver functionality
- Fix kernel-doc warnings and typos in DPAA header

* tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits)
  bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
  soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
  phy: lynx-10g: use RCW override procedure for dynamic protocol change
  soc: fsl: guts: implement the RCW override procedure
  dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
  soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
  soc: fsl: guts: make it easier to determine on which SoC we are running
  soc: fsl: guts: add a central fsl_guts_read() function
  soc: fsl: guts: add a global structure to hold state
  soc: fsl: guts: use a macro to encode the DCFG CCSR space
  soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup
  soc: fsl: dpio: fix kernel-doc typos
  soc: fsl: fix kernel-doc warnings and typos
  bus: fsl-mc: Remove redundant dev_err()
  soc: fsl: qe: Add support of IRQs in QE GPIO
  soc: fsl: qe: Rename irq variable to parent_irq
  soc: fsl: qe: Convert to generic IRQ chip
  soc: fsl: qe: Handle spurious interrupts
  soc: fsl: qe: Iterate over all pending interrupts in cascade handler
  soc: fsl: qe: Use generic_handle_domain_irq()
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Up until this patch, the only protocol change supported was between
1000Base-X/SGMII and 2500Base-X. The others require an RCW override
procedure which was lacking.

Since now the guts driver provides the means of applying this procedure,
make use of it and remove any comment which mentioned the limitation.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20260721231603.67865-10-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>

Pull phy fixes from Vinod Koul:

 - fixes for zynqmp clock and pm error handling and SERDES scrambler
   register handling

 - Rockchip SSC spread fix

 - Qualcomm musb return call fix

* tag 'phy-fixes-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: zynqmp: keep SERDES scrambler and 8b/10b enabled for USB
  phy: zynqmp: use read-modify-write for SERDES scrambler bypass
  phy: zynqmp: fix L0_TM_DISABLE_SCRAMBLE_ENCODER mask
  phy: zynqmp: fix runtime PM leak on probe allocation failure
  phy: zynqmp: fix clock error handling in xpsgtr_phy_init()
  phy: rockchip: naneng-combphy: Always configure SSC spread direction
  phy: qcom: m31-eusb2: Fix return value of init call

gpio: legacy interface cleanups for 7.3

These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.

There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.

This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.

linux/gpio.h should no longer be used, so remove those and
make sure linux/gpio/consumer.h is included instead.

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

USB Gen1 requires scrambling and 8b/10b encoding to be performed in the
physical layer. Do not bypass PHY-side scrambler or encoder/decoder for
USB operation, as mandated by the USB 3.x specification.

Scrambler and 8b/10b bypass remain restricted to SATA and SGMII
modes, where encoding is handled in the controller.

Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Cc: stable@vger.kernel.org
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260627155229.2791113-4-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

xpsgtr_bypass_scrambler_8b10b() used xpsgtr_write_phy() which performs
a full register write, silently clearing any bits beyond the intended
bypass control fields.

Switch to xpsgtr_clr_set_phy() with clr=mask, set=mask to set only
the bypass bits while preserving the remaining bits in each register.

Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Cc: stable@vger.kernel.org
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260627155229.2791113-3-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>